Hyundai H Led15v6 Instruction Manual

LED TV
Руководство по эксплуатации 
Instruction manual
H-LED15V6
ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
InstallationWall mounting
Stand installation
Connection
Connection Outdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations Teletext operations
OSD operation Channel setting
Picture setting
Sound setting
Timer setting
 Option setting Screen setting
USB operation General operatoins of file playback
General information...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

Installation
Wall mounting
For wall mounting the back panel of this 
unit is equipped with 4 screw holes (4 mm 
diameter, 75 mm horizontal spread distance x 
75 mm vertical spread distance). A wall-mount 
bracket should be used for wall mounting (the 
bracket is not included and should be acquired 
separately). Manufacturer is not responsible 
for improper mounting resulting in damage of 
the unit.
Stand installationPlace the LED TV on a solid flat surface. 
Use soft material to place over the front...

5
Connection
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect a TV or CATV antenna to the 
antenna jack. •  Connect a video source to the Composite 
video input jack with RCA cable. •  Connect an audio source to the proper 
Audio input jacks (left and right).
 Connect the power cord to the DC adaptor, 
then connect the adapter to the DC power jack 
of this unit. •...

6
Operation
Control elements    
Front panel
6
7
1 23451. CH+/- buttons
2. VOL+/- buttons
3. MENU button
4. TV/AV button
5. POWER button
6. Power indicator
7. IR sensor
8. RF antenna jack
9. Left audio input RCA
10. Right audio input RCA
11. Composite video input
12. Component video input
13. Power input
14. USB port 
15. HDMI input
16. PC (VGA) input
17. PC audio input
18. Video output
19. Right audio output
20. Left audio output
21. Headphone jack
22. Digital coaxial audio output
Back panel
89
10
11...

7
Operation
Remote controller (RC)
1
2
3
4
5
6
7
9 8
11
  10
12
13 14
15
16
17
18
19
21 20
22
23
24
25
1. POWER button
2. Number buttons
3. SOURCE/REVEAL (
) button
4. SIZE ()/ZOOM () button
5. MENU button
6. ENTER button/cursor buttons (LEFT/RIGHT/
UP/DOWN)
7. VOL+/VOL- buttons
8. SLEEP button
9. LIST/REPEAT button
10. Green button/
 button 11. Red button/
 button
12. TEXT ()/ button
13. HOLD ()/ STILL button
14. INFO/INDEX () button
15. 
 button
16. AUDIO () button
17. RECALL () button
18. EXIT button...

89
OperationOperation
General operations
•  Press POWER button on the unit or on 
the RC to switch on the power. Press POWER 
button again to switch the unit into standby 
mode. When the unit is on, the power indicator 
will be green. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume.
•  Press 
 to mute sound, press this button 
again or increase volume to resume sound. •  Press SLEEP button repeatedly to set the 
sleep time (from 10 to 240 min...

89
OperationOperation
6. Press MENU button to return to the 
previous menu page. Press EXIT button on the 
RC to quit the menu.
  Some menu items may be in grey color, 
in this case they are not adjustable. Pictures 
of OSD menu are for reference only; they may 
differ from the real screens.
Channel setting (only for TV source)
CHANNEL
Auto tuning
ATV Manual tuning
Programme edit
Move Menu EnterExit
•  Auto tuning: press RIGHT button to start 
automatic search of available channels. To 
stop the process...

10
Operation
Sound setting
SOUND
Sound mode
Treble
Bass
Balance
Auto volume
SPDIF mode
Move Menu EnterExit
•  Sound mode: Standard/Music/Movie/
Sports/User. •  Treble: adjust treble frequency.
•  Bass: adjust bass frequency.
•  Balance: adjust balance between left and 
right speaker. •  Auto volume: set the auto volume 
correction on/off. •  SPDIF mode: select PCM/Auto/Off.
Timer setting
TIMESleep timer
Auto sleep
OSD timer
Move Menu EnterExit
•  Sleep timer: select the period until 
automatic switch-off...