Hyundai H Lcd3218 Instruction Manual

ТЕЛЕВИЗОР ЦВЕТНОГО ИЗОБРАЖЕНИЯ 
ЖИДКОКРИСТАЛЛИЧЕСКИЙ  (LCD)
LCD TV
Руководство по эксплуатации 
Instruction manual
H-LCD3218
 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Installation
Stand installation
Connection
ConnectionOutdoor antenna connection
Other connections
Operation
Control elements  Front panel
 Back panel
Remote controller Changing the battery
General operations  Teletext operations
OSD operation Picture setting
Sound setting
Function setting
Timer setting
Channel setting
PC setup
General information
Troubleshooting Causes of interference
Accessories
Specifications
2 3...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

4
Before you start
• Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.
•  Fasten the wheel of the product or shelf 
with wheels when installing this...

5
Installation
Stand installation
1. Cover an even stable surface with a soft 
cloth. Place the LCD TV unit facedown on the 
cloth. Prepare to put the stand in.
  Stand    Screws
2. Fit the stand into the LCD TV unit stand 
socket until a click. Fix the stand by 4 screws 
included.
Downloaded From TV-Manual.com Manual” 

6
Operation
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources to the proper 
stereo audio input jacks ‘L’ and ‘R’. •  Connect the video source to the video 
input jack by RCA cable. •  Connect the video source to the S-Video 
input jack of the monitor by the S-video cable 
(provided that the video source has S-video 
output jack). •  When using the TV as a...

7
Operation
Control elements    
Front panel
Back panel
1. Power switch
2. HDMI1 and HDMI2 inputs
3. PC audio input
4. Component audio 1 input (R+L)
5. Component video (YPbPr) 1 input
6. Component video (YPbPr) 2 input
7. Component audio 2 input (R+L)
8. Stereo audio input 2 (Left+Right)
9. Video input 2
10. RF antenna input
11. VGA (PC) input
12. Audio/video output
13. Audio/video input 1
14. S-Video input 1. POWER button
2. TV/AV button
3. MENU button
4. VOL- button
5. VOL+ button
6. CH- button
7. CH+...

89
OperationOperation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  SOURCE/REVEAL button
4.  SIZE/ZOOM button
5.  MENU button
6.  ENTER button/cursor buttons (
//
/)
7.  VOL+/VOL- buttons
8.  SLEEP button
9.  PIP/CANCEL button
10. Green button 11. Red button 
12. TEXT button
13. HOLD/STILL button
14. INFO/INDEX button
15. 
 button
16.  button
17. RECALL button
18. EXIT button
19. CH+/CH- buttons
20. 
 button
21. Yellow button
22. Blue button
23. E/W button
24. SUBPAGE button
Changing the...

89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power. Press POWER button 
again to switch the unit into standby mode. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume.
•  Press 
 button to cut off sound, press this 
button again or adjust volume to resume sound. •  Press SLEEP button repeatedly to set the 
sleep time. When sleep time is set, press this 
button to display the time...

10
Operation
Picture setting
Picture
Contrast
Brightness
Tint
Saturation
Sharpness
Colour Temp
Picture mode
3D NR
•  Contrast
•  Brightness
•  Tint: adjust the tone of color when your 
system is in NTSC. •  Saturation
•  Sharpness
•  Colour Temperature: Normal/Warm/Cool.
•  Picture Mode: User/Standard/Soft/Vivid.
•  3D Noise Reduction: Digital noise 
reduction effect for reducing the video noise 
level: Off/Low/Middle/High.
Sound setting
Sound
Equalizer
Volume
Balance
Sound mode
AVC
Surround
•...