Hyundai H Lcd2209 Instruction Manual

H-LCD2209
LCD TV   @DL?E?

2 Table of contentsTable of contents ......................................................................................................................................... 2
Important safety precautions ........................................................................................................................ 3
General introduction .................................................................................................................................... 5...

3 Thank you very much for buying our product – the most natural Colour Television Receiver. To enjoy your
set to the full from the very beginning, read this manual carefully and keep it for future reference.
Important safety precautions Warning
Please unplug the power cord from the AC outlet and contact our service personnel to repair under thefollowing conditions:xAny obvious abnormality appears in the product, such as smoky, peculiar smell or strange sound.
xWhen a liquid has been spilled or other...

4 xDo not place any vase, potted plant, cup, medicine and any container with water on this product. If the
liquid is spilt, it may cause the fire, electric shock or breakdown.
xDo not install it at the place on the strong magnetic field or current field. It may cause break down. This
equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic
environment.
xFasten the wheel of the product or shelf with wheels when installing this product. If it moves or is...

5 General introductionxSize of the screen: 22/56 cm
xAspect ratio: 16:10
xScreen resolution: 1680x1050
xBrightness: 300 cd/m2
xContrast: 1000:1
xAngle of view: 160º/160º
xResponse time: 5 ms
xTV systems: PAL/SECAM; BG/DK/I/L
xNICAM stereo
xConnections: RF antenna, HDMI, S-Video, Composite, SCART, VGA, PC audio input
xHeadphones out
xProgressive scan
xTeletext
x99 channels memory
xSleep timer
xDigital comb filter
xOSD menu in Russian and English languages
xPower supply: 110-240V,...

6 Controls and connectionFront view     Back view
1.  Power indication light
2.  Remote sensor
3.  AV/TV function switch button
4.  MENU button
5.  VOL-/Left direction button
6.  VOL+/Right direction button
7.  CH-/Down direction button
8.  CH+/Up direction button
9.  Power button
10.  DC input jack
11.  HDMI jack12.  VGA jack
13.  SCART jack
14.  S-video jack
15.  Video jack
16.  Audio in (Left) jack
17.  Audio in (Right) jack
18.  PC audio in jack
19.  Earphone jack
20.  TVRF antenna jack
10
11
12
13...

7 Connect the TVRF source with the antenna port. TVRF signal including: You can use 75
á  coaxial cable
to connect the outdoor antenna.
Outdoor Antenna Connection:
Use 75
ácoaxial cable plug or 300-75
áimpedance converter to plug in antenna input terminal on the rear of
the cabinet.
xConnect the audio sources (Including DVD, VCDR, CAMCORDER and PC) to the proper AUDIO
input jacks ‘L’ and ‘R’.
xConnect the video source to the VIDEO jack by RCA cable.
xIf the video source has a SCART output jack, you...

8Remote control (RC)1.  POWER button. Press to turn on/off the TV
set or to switch it to standby mode.
2.  MUTE button. Press to turn off/on the sound.
3.  Number buttons. Press to input figures.
4.  LAST CHANNEL button. Press to switch to
the last watched channel.
5.  SYSTEM button. Press to adjust audio
parameters.
6.  NICAM A2 button. Press to turn on/off the
NICAM function.
7.  VOL+/VOL- button. Press to adjust the sound
volume level.
8.  CH+/CH- button. Press to switch between
channels.
9. DISPLAY...

9 Insert the batteries in the RC
xRemove the battery cover by pressing the symbol and pulling the cover space in the direction of the
arrow.
xInsert the two 1.5V (AAA size) batteries making sure the polarity (+ or -) of the batteries matches the
polarity marks inside the unit.
xReplace the battery cover by sliding it in until you hear a click sound.
Note:If the RC doesn’t react to pressing the buttons or the working range was decreased insert the new
batteries.
Use of RC
Use the RC by pointing it...

10 General operationsxPress the POWER button on the unit or the remote control to switch on the power; the indication light
will be in blue color. Press the POWER button again to switch off the power, and the light will be in red
color.
xThe Picture setup, Sound setup, Previous channel can be memor ized b efor e you switch off the
TV/Monitor. The TV/Monitor will re-start under the previous state when you switch on it again.
xPress the VOL - or VOL + button to adjust the volume output.
xPress the...