Hyundai H Lcd2206 Instruction Manual

H-LCD2206
LCD TV           LCD L?E?

2 Table of contentsTable of contents............................................................................................................................. 2
Important safety precautions ........................................................................................................... 3
General Introduction ....................................................................................................................... 5
Accessories...

3 Important safety precautions Warning
Please unplug the power cord from the AC outlet and contact our service personnel to repair underthe following conditions:xAny obvious abnormality appears in the product, such as smoky, peculiar smell or strange
sound.
xWhen a liquid has been spilled or other objects have fallen into the product.
xNo picture or sound.
xCover or panel is broken.
xAlthough you have operated the product by following the operating instructions, it still cannot
wo rk no rmally....

4 mix old and new batteries, and do not place the batteries to burn or disassemble them. If the remote
control is unused for an extend period of time, remove batteries from the remote control.
Cords
xPlace the signal cord back of the product.
Cleaning
xUnplug the power cord from the AC outlet before cleaning the product. Do not use liquid
cleaners or aerosol cleaners and others; use the special LCD Panel cleaners. Keep the power off
before LCD panel dry completely.  Caution: Do not use volatile cleaner...

5 General IntroductionxSize of the screen 22”/56 cm
xAspect ratio 16:10
xScreen resolution: 1680x1050
xBrightness: 300 cd/m2
xContrast: 1000:1
xWide viewing angle 170º/160º
xResponse time: 8 ms
xTV systems: PAL, SECAM; BG/DK/I
xDigit al co mb filt er
xOSD menu in Russian and English languages
xConnections: RF antenna, S-Video, Composite, VGA, PC audio input
xPower supply: 100-240V, 50/60Hz
AccessoriesLCD TVRemote controller (RC)
Instruction manualDC adaptorPower cableRCA cable 

6 InstallationAntenna connection
1.  Connect the plug of the antenna cable or CATV cable to the cable (not provided with this unit),
then connect to the antenna input of this unit for best reception.
2.  If the antenna cable in your ho me is other than the above two, or you have problems in
installing the antenna, please contact your dealer.
Notes:
1.  Current outdoor antenna or cable TV usually use 75 Ohm coaxial antenna cable. For better
reception suggest using this kind of antenna cable.
2.  Flat...

7 ControlsFront panel
5  6789   1011
1.  Left speaker
2.  Power indicator
3.  Remote sensor
4.  Right speaker
5.  VOL+ button
6.  VOL- button
7.  PROG+ button
8.  PROG- button
9.  MENU button
10.  SOURCE button
11.  POWER button 

8 Back panel1.Power:Switch the power switch to connect AC power.2.AC in: Connect the AC power.3.ANTENNA in: Connect a coaxial cable to receive signal from the antenna or cable.4.Earphone: audio output, speakers will be muted when ear phone plugged.5.PC audio in: audio input to be connected to PC.6.AV: connect AUDIO (R/L) and VIDEO input signal from signal source such as DVD.7.S-VIDEO input: Connect S-VIDEO, use same AUDIO input as AV input.8.PC in: Connect a PC via a VGA cable.
9.YpbPr: Connect YPBPR...

9 General operationsTurning ON/OFF
1.  Plug the end of the power cord into an appropriate wall outlet and connect the antenna cable or
CATV cable.
2.  Turn on the TV. Switch on the POWER button on the front panel of TV to connect AC power.
When the power of the TV is connected, the power indicator lights up in red, the TV is in
standby mode, press the POWER button on the RC or front panel to switch the set to normal
operation mode.
3.  Turn off the TV. Press the POWER button on the RC or front panel to...

10 FAV
Press the FAV. button on the RC repeatedly, it will select FAV. channel in cycle.
Q.VIEW
Press Q.VIEW button on the RC will switch to last program or source you just watch.