Hyundai H Lcd1910 Instruction Manual

ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ (LCD)
LCD TV
Руководство по эксплуатации 
Instruction manual
H-LCD1910
 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Installation and connection
ConnectionOutdoor antenna connection
Other connections
Operation
Control elements  Front and lateral panel
 Back panel
Remote controller Changing the battery
General operations  AV signal sources
 Teletext operations
 PC screen
OSD operation Picture setting
Sound setting
TV tuning setup
 Time setting Function setting
General information
Troubleshooting Causes of interference
Accessories...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

4
Before you start
as well as the damage to the product. •  Please place the product on a flat surface 
in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. Store the 
product with a temperature from –20
0C ~500C; 
otherwise you may destroy the product.  • Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown....

5
Installation and connection
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources (Including 
DVD, VCDR, CAMCORDER and PC) to the 
proper AUDIO input jacks ‘L’ and ‘R’. •  Connect the video source to the VIDEO 
jack by RCA cable. •  If the video source has a SCART output 
jack, you can connect the signal to the monitor 
by the SCART cable. •  Connect the video...

6
Operation
Control elements    
Front and lateral panel
 
        1. TV/AV button
        2. CH+/UP cursor button
        3. CH-/DOWN cursor button
        4. VOL+/RIGHT cursor button
        5. VOL-/LEFT cursor button
        6. MENU button
        7. Remote control sensor
        8. POWER button
Back panel
1. Power socket
2. HDMI input
3. VGA input
4. SCART connector
5. S-Video input
6. Video input
7. Audio (left) input
8. Audio (right) input
9. PC audio input
10. Earphone output
11. TVRF antenna...

7
Operation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  ASPECT button
4.  VOL+/VOL- buttons
5.  DISPLAY button
6.  ENTER button/cursor buttons (
///)
7.  MENU button
8.  P.MODE button
9.  INPUT button
10. HOLD button 
11. TEXT button
12. INDEX button
13. SIZE button 14.  RED button
15.  GREEN button
16.  AUTO button
17.  MUTE button
18.  
 button
19.  NICAM button
20.  CH+/CH- buttons
21.  EXIT button
22.  S.MODE button
23.  SLEEP button
24.  PGUP button
25.  PGDW button
26.  SUBPAGE...

89
OperationOperation
General operations
•  Press POWER button on the unit or on 
the RC to switch on the power, the indication 
light will be in blue color. Press POWER button 
again to switch off the power, and the light will 
be in red color. •  The picture setup, sound setup, previous 
channel can be memorized before you switch 
off the unit. The unit will restart under the 
previous state when you switch on it again. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button...

89
OperationOperation
corresponding color page displayed at the 
lower parts of teletext screen.
PC screenSelect the VGA input (TV into PC) mode. 
The unit has a VGA jack for a normal 
computer. Connect the monitor with a PC 
by this jack and the unit can be used as the 
monitor for the PC.
OSD operation
Press MENU button on the RC to enter a 
setting menu paged displayed on the screen. 
Press 
/ buttons to go to the 
needed item, then use 
/ buttons to select 
available setting or to adjust the selected...

10
Operation
•  Sound System: select corresponding 
sound system. •  Colour System: select corresponding 
colour system. •  Program Label: this item allows you to 
name a channel, or rename the program 
that you named also. In this item, you could 
move white cursor by 
/ buttons, and input 
available character by 
/ buttons.   If you wish to delete the character, you 
have to press / buttons until the 
current cursor disappears.  •  AFT: this item allows you to fine tune 
a channel selected due to weak...