Hyundai H Lcd1509 Instruction Manual

H-LCD1509
LCD TV   @DL?E?

2 Table of contentsTable of contents ......................................................................................................................................... 2
Important safety precautions ........................................................................................................................ 3
Accessories.................................................................................................................................................. 5
Controls and...

3 Thank you very much for buying our product – the most natural LCD TV. To enjoy your set to the full from
the very beginning, read this manual carefully and keep it for future reference.
Important safety precautions Warning
Please unplug the power cord from the AC outlet and contact our service personnel to repair under thefollowing conditions:xAny obvious abnormality appears in the product, such as smoky, peculiar smell or strange sound.
xWhen a liquid has been spilled or other objects have fallen...

4 xDo not install it at the place on the strong magnetic field or current field. It may cause break down. This
equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic
environment.
xFasten the wheel of the product or shelf with wheels when installing this product. If it moves or is
tipped over, it may be damaged.
xDo not place any fire source such as candlelight close to this product or place it on this product.
If it is tipped over or fallen down, it may...

5 AccessoriesNote:Please keep the wrapping box and the padding well for future convenient use when you convey them.
Please check the accessories. If anything is missed address to the seller.
LCD TV    DC adapter   Power cordRemote control (RC)
RCA cable   InstructionWarranty card   Customer info
    Manual 

6 Controls and connectionFront view
Back view1.Powerindication light2.  Remote sensor
3.  POWER button
4.  CH+/Up direction button
5.  CH-/Down direction button
6.  VOL+/Right direction button
7.  VOL-/Left direction button
8.  MENU button
9.  AV/TV function switch button10.DC input jack11.  SCART jack
12.  PC audio in jack
13.  VGA jack
14.  Audio in (Right) jack
15.  Audio in (Left) jack
16.  Composite video jack
17.  S-Video jack
18.  TVRF antenna jack
10
11
12
13
14
15
16
17
18 

7 Connect the TVRF source with the antenna port. T VRF signa l
including: You can use 75 Ohm coaxial cable to connect the outdoor
antenna.
Outdoor Antenna Connection:
Use 75 Ohm coaxial cable plug or 300-75 Ohm impedance converter to plug in antenna input terminal on the
rear of the cabinet.
xConnect the audio sources (Including DVD, VCDR, CAMCORDER and PC) to the proper AUDIO
input jacks ‘L’ and ‘R’.
xConnect the video source to the VIDEO jack by RCA cable.
xIf the video source has a SCART output...

8Remote control (RC)1.  POWER button. Press to turn on/off the TV
set or to switch it to standby mode.
2.  MUTE button. Press to turn off/on the sound.
3.  Number buttons. Press to input figures.
4.  LAST CHANNEL button. Press to switch to
the last watched channel.
5.  SYSTEM button. Press to adjust audio
parameters.
6.  NICAM A2 button. Press to turn on/off the
NICAM function.
7.  VOL+/VOL- button. Press to adjust the sound
volume level.
8.  CH+/CH- button. Press to switch between
channels.
9. DISPLAY...

9 Insert the batteries in the RC
xRemove the battery cover by pressing the symbol and pulling the cover space in the direction of the
arrow.
xInsert the two 1.5V (AAA size) batteries making sure the polarity (+ or -) of the batteries matches the
polarity marks inside the unit.
xReplace the battery cover by sliding it in until you hear a click sound.
Note:If the RC doesn’t react to pressing the buttons or the working range was decreased insert the new
batteries.
Use of RC
Use the RC by pointing it...

10 General operationsxPress POWER button on the unit or the RC to switch on the power; the indication light will be in blue
color. Press POWER button again to switch off the power, and the light will be in red color. T he Picture
setup, Sound setup, Previous channel can be memorized before you switch off the unit. The unit will re-
start under the previous state when you switch on it again.
xPress VOL- or VOL+ button to adjust the volume output.
xPress SLEEP button to set the sleep time.
xPress AV/TV...