Hyundai H Ht5115 Instruction Manual

ДОМАШНИЙ КИНОТЕАТР
HOME THEATRE
Руководство по эксплуатации 
Instruction manual
H-HT5115-N
 

23
Table of contentsBefore you start
Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read this 
manual  carefully  before  connecting,  operating  and/or  adjusting  the  product  and  keep  the 
manual for reference in the future.
9
9
9
9
9
9
9
10
10
10
10
12
13
13
14
14
14
14
14
15
15
16
16
17
17
17
17
18
19
Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Supported formats
Connection
Video/audio system connection...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, you 
will ensure that your disposed product undergoes the necessary treatment, recovery and 
recycling and thus prevent potential negative effects...

4
Before you start
•  All repairs and technical service should 
be made by qualified specialist from service 
centers.
All images provided herein are schematic 
drawings of real objects and may differ 
from their real images.
Supported formats
Disc typesSymbol Contents
DVD
Compressed digital audio - video
HDCDCompressed digital audio
MPEG4 (DivX)
Compressed digital audio - video
Video-CD (VCD)
Compressed digital audio - video
CDDA
Digital audio
MP3
Compressed digital audio
Kodak Picture CD
Compressed...

5
Connection
Video/audio system connection
  Before you start connection of external 
devices, ensure that power of the unit is 
switched off.
Following outputs are available in this unit.
Composite video
Use the yellow plug of an AV cable to 
connect the composite video output of this unit 
to the video input of a TV/monitor.
Component video
Use a 3-core AV cable to connect the 
component outputs of this unit to the 
corresponding inputs of a TV/monitor.
S-video
Use an S-Video cable to connect the...

6
Operation
Control elements
Front panel
1234 56 8
7 9
1.  STANDBY button
2.  Disc tray
3.  OPEN/CLOSE button
4.  Display
5.  Microphone socket
6.  
 button
7.  USB port
8.  
 button
9.  VOLUME knob
Rear panel
1 234 5
6 78 9 10
  
1.  Power switch
2.  Speaker output
3.  Line input
4.  Composite video output
5.  Component video output
6.  S-Video output
7.  Stereo audio output
8.  Coaxial digital audio output
9.  FM antenna jack
10. SCART connector
 

7
Operation
Remote controller (RC)    
1.  STANDBY button
2.  PROG button
3.  V-MODE button
4.  A-MODE button
5.  GOTO button
6.  SETUP button
7.  AUDIO/MEMORY button
8.  MENU/RIP/MO/ST button
9.  TITLE/COPY/FM buttons
10. ENTER button/Cursor buttons 11. SOURCE SELECT button
12. 
 button
13. //RADIO+/- buttons
14.  button
15. CH-LEVEL button
16. USB/DISC button
17. KEY+/- buttons
18. OSD button
19. OPEN/CLOSE button
20. Number buttons
21. SUBTITLE/AUTO button
22. ANGLE button
23. 
 button
24. VOLUME+/-...

89
OperationOperation
Button functions
STANDBY
Press this button to put the unit to standby 
mode; press the button again, to turn on the 
unit. To turn off the unit completely, press the 
Power switch on the rear panel of the unit.
OPEN/CLOSE
Press this button when power is on, the disc 
tray is pushed out. Put the disc on the tray with 
the title faced up. Press OPEN/CLOSE button 
again to close the disc tray.
USB/DISC
Press this button to select a signal source 
(USB/DVD).
COPY/TITLE
•  When playing a...

89
OperationOperation
PROG
•  If the disc contains 2 or more tracks, 
chapters or titles, set up the playing order to 
your preference. Press PROG button to enter 
program menu. •  Press number buttons to input the number 
of the track, title or chapter. Use cursor buttons 
to move the cursor to START item. Press 
ENTER button to start program playback. 
Press PROG button to cancel programming.
 For MP3 disc, this function is not available.
SELECT SOURCE
Press this button repeatedly to switch 
between...

10
Operation
CH-LEVEL
Press this button repeatedly to select a 
channel or the overall volume, then press 
VOLUME+/- buttons to adjust its level.
System setup
1.  Press SETUP button to enter the setup 
menu. In Setup menu, press SETUP button 
again to quit the setup page.
2.  Use 
/ buttons to choose a setup 
page: General setup page, Audio setup 
page, Dolby setup page, Video setup page, 
Preference page.
3.  Press 
 button to enter the setup 
page selected.
4.  Use 
/ buttons to select the 
option you...