Husqvarna 325 C Manual
Here you can view all the pages of manual Husqvarna 325 C Manual. The Husqvarna manuals for Trimmer are available online for free. You can easily download all the documents as PDF.
Page 1
Operator's manual (EPA II) Please read these instructions carefully and make sure you understand them before using the machine.English 322L 323L 325C 325CX-SERIES 325LX-SERIES 325LXT-SERIES 325LDX-SERIES
Page 2
2 – English Symbols SYMBOL EXPLANATION WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Read through the Operator‘s Manual carefully and understand the content before using the machine. Always use • A protective helmet where there is a risk of falling objects • Ear protection • Approved eye protection Checks and/or maintenance should be carried out with the engine switched off, with the stop...
Page 3
English – 3 CONTENTS List of contents SYMBOL EXPLANATION Symbols ............................................................................... 2 CONTENTS List of contents .................................................................... 3 SAFETY INSTRUCTIONS Personal protective equipment ............................................. 4 The machine‘s safety equipment .......................................... 4 Control, maintenance and service of the machine‘s safety equipment...
Page 4
4 – English The machine‘s safety equipment This section describes the machine‘s safety equipment, its function and how checks and maintenance are carried out to ensure that it operates correctly. (See the chapter “What is what“ to locate where this equipment is positioned on your machine.) Personal protective equipment SAFETY INSTRUCTIONS ! WARNING! Never use a machine with defective safety equipment. Follow the control, maintenance and service instructions described in this section. 1. Throttle trigger...
Page 5
English – 5 SAFETY INSTRUCTIONS 4. Vibration damping system Your machine is equipped with a vibration damping system, which is designed to give as vibration-free and comfortable use as possible. Use of incorrectly wound cord or incorrect cutting equipment increases the level of vibration. The machine’s vibration damping system reduces the transfer of vibrations between the engine unit/ cutting equipment and the machine’s handle unit. 5. Muffler The muffler is designed to give the lowest possible noise...
Page 6
6 – English 3. Cutting attachment guard •Ensure that the spray guard is undamaged and is not cracked. •Replace the guard if it has been exposed to impact or is cracked. •Always use the prescribed blade an guard combination, see chapter Technical data. SAFETY INSTRUCTIONS Control, maintenance and service of the machine‘s safety equipment IMPORTANT INFORMATION •All service and repairs to the machine require special training. •This applies especially to the machine‘s safety equipment. If the machine does...
Page 7
English – 7 SAFETY INSTRUCTIONS 6. Cutting equipment The section describes how through correct maintenance and through using the right type of cutting equipment you can: •Obtain maximum clearing capacity. •Increase the service life of the cutting equipment. Two basic rules: 1)Only use the cutting and guard equipment we recommend! See chapter “Technical data“. 2)Check the cutting equipment with regard to damage and crack formation. Damaged cutting equipment should always be replaced. Cutting equipment 7....
Page 8
8 – English SAFETY INSTRUCTIONS General safety instructions Transport and storage •Store and transport the machine and fuel so that any leakage or fumes do not risk coming into contact with sparks or naked flames. For example, electric machines, electric motors, electrical switches/power switches, heaters or the like. •When storing and transporting fuel approved containers intended for this purpose must be used. •When storing the machine for long periods the fuel tank must be emptied. Contact your local...
Page 9
English – 9 ! General working instructions SAFETY INSTRUCTIONS Basic working techniques •Always drop to idling speed after each working operation. Longer periods running at full throttle without loading the engine (that is without resistance, which the engine feels from the cutting equipment when trimming) can lead to serious engine damage. Basic safety precautions 1. Observe your surroundings: •To ensure that people, animals or other things cannot affect your control of the machine. •To ensure that the...
Page 10
10 – English SAFETY INSTRUCTIONS Clearing •The clearing technique removes all unwanted vegetation. Keep the trimmer head just above the ground and tilt it. Let the end of the cord strike the ground around trees, posts, statues and the like. NOTE! This technique increases the wear on the cord. •The cord wears quicker and must be fed forward more often when working against stones, brick, concrete, metal fences, etc. than when coming into contact with trees and wooden fences. •When trimming and clearing you...