Huawei U8510-7 User Manual

							67
vehicle engine. Triggering of sparks in such areas could cause an explosion or a fire, 
resulting in bodily injuries or even deaths. Do not power on your device at refueling 
points such as service stations. Comply with restrictions on the use of radio equipment 
in fuel depots, storage, and distribution areas, and chemical plants. In addition, adhere 
to restrictions in areas where blasting operations are in progress. Before using the 
device, watch out for areas that have potentially explosive atmospheres that are often, 
but not always, clearly marked. Such locations include areas below the deck on boats, 
chemical transfer or storage facilities, and areas where the air contains chemicals or 
particles such as grain, dust, or metal powders. Ask the manufacturers of vehicles 
using liquefied petroleum gas (such as propane or butane) whether this device can be 
safely used in their vicinity.
Traffic SecurityObserve local laws and regulations while using the device. In addition, if using the 
device while driving a vehicle, comply with the following guidelines:
•   Concentrate on driving. Your first responsibility is to drive safely.
•   Do not talk on the device while driving. Use hands-free accessories.
•   When you have to make or answer a call, park the vehicle at the road side before 
using your device.
•   RF signals may affect electronic systems of motor vehicles. For more information, 
consult the vehicle manufacturer.
•   In a motor vehicle, do not place the device over the air bag or in the air bag 
deployment area. Otherwise, the device may hurt you owing to the strong force 
when the air bag inflates.
•   Do not use your device while flying in an aircraft. Power off your device before 
boarding an aircraft. Using wireless devices in an aircraft may cause danger to the 
operation of the aircraft and disrupt the wireless telephone network. It may also be 
considered illegal.
Operating Environment
•   Do not use or charge the device in dusty, damp, and dirty places or places with 
magnetic fields. Otherwise, it may result in a malfunction of the circuit.
•   The device complies with the RF specifications when the device is used near your 
ear or at a distance of 1.5 cm from your body. Ensure that the device accessories 
such as a device case and a device holster are not composed of metal  
						

							68
components. Keep your device 1.5 cm away from your body to meet the 
requirement earlier mentioned.
•   On a stormy day with thunder, do not use your device when it is being charged, to 
prevent any danger caused by lightning.
•   When you are on a call, do not touch the antenna. Touching the antenna affects the 
call quality and results in increase in power consumption. As a result, the talk time 
and the standby time are reduced.
•   While using the device, observe the local laws and regulations, and respect others 
privacy and legal rights.
•   Keep the ambient temperature between -10°C and 40°C while the device is being 
charged. Keep the ambient temperature between -10°C to 50°C for using the 
device powered by a battery.
Prevention of Hearing DamageUsing a headset at high volume can damage your hearing. To reduce the risk of 
damage to hearing, lower the headset volume to a safe and comfortable level.
Safety of ChildrenComply with all precautions with regard to childrens safety. Letting the child play with 
your device or its accessories, which may include parts that can be detached from the 
device, may be dangerous, as it may present a choking hazard. Ensure that small 
children are kept away from the device and accessories.
AccessoriesChoose only batteries, chargers, and accessories approved for use with this model by 
the device manufacturer. The use of any other type of battery, charger, or accessory 
may invalidate any warranty for the device, may be in violation of local rules or laws, 
and may be dangerous. Please contact your dealer for information about the 
availability of approved batteries, chargers, and accessories in your area.
Battery and Charger
•   Unplug the charger from the electrical plug and the device when not in use.
•   The battery can be charged and discharged hundreds of times before it eventually 
wears out. When the standby time and the talk time are shorter than the normal 
time, replace the battery. 
						

							69
•   Use the AC power supply defined in the specifications of the charger. An improper 
power voltage may cause a fire or a malfunction of the charger.
•   Do not connect two poles of the battery with conductors, such as metal materials, 
keys, or jewelries. Otherwise, the battery may be short-circuited and may cause 
injuries and burns on your body.
•   If battery electrolyte leaks out, ensure that the electrolyte does not touch your skin 
and eyes. When the electrolyte touches your skin or splashes into your eyes, wash 
your eyes with clean water immediately and consult a doctor.
•   If there is a case of battery deformation, color change, or abnormal heating while 
you charge or store the battery, remove the battery immediately and stop using it. 
Otherwise, it may lead to battery leakage, overheating, explosion, or fire.
•   If the power cable is damaged (for example, the cord is exposed or broken), or the 
plug loosens, stop using the cable at once. Otherwise, it may lead to an electric 
shock, a short circuit of the charger, or a fire.
•   Do not dispose of batteries in fire as they may explode. Batteries may also explode 
if damaged.
•   Do not modify or remanufacture, attempt to insert foreign objects into the battery, 
immerse or expose to water or other liquids, expose to fire, explosion or other 
hazard.
•   Avoid dropping the device or battery. If the device or battery is dropped, especially 
on a hard surface, and the user suspects damage, take it to a qualified service 
center for inspection.
•   Improper battery use may result in a fire, explosion or other hazard.
•   Promptly dispose of used batteries in accordance with local regulations.
•   The device should only be connected to products that bear the USB-IF logo or 
have completed the USB-IF compliance program.
Cleaning and Maintenance
•   The device, battery, and charger are not water-resistant. Keep them dry. Protect 
the device, battery, and charger from water or vapor. Do not touch the device or the 
charger with a wet hand. Otherwise, it may lead to a short circuit, a malfunction of 
the device, and an electric shock to the user. 
						

							70
•   Do not place your device, battery, and charger in places where they can get 
damaged because of collision. Otherwise, it may lead to battery leakage, device 
malfunction, overheating, fire, or explosion.
•   Do not place magnetic storage media such as magnetic cards and floppy disks 
near the device. Radiation from the device may erase the information stored on 
them.
•   Do not leave your device, battery, and charger in a place with an extreme high or 
low temperature. Otherwise, they may not function properly and may lead to a fire 
or an explosion. When the temperature is lower than 0°C, performance of the 
battery is affected.
•   Do not place sharp metal objects such as pins near the earpiece. The earpiece 
may attract these objects and hurt you when you are using the device.
•   Before you clean or maintain the device, power off the device and disconnect it 
from the charger.
•   Do not use any chemical detergent, powder, or other chemical agents (such as 
alcohol and benzene) to clean the device and the charger. Otherwise, parts of the 
device may be damaged or a fire can be caused. You can clean the device and the 
charger with a piece of damp and soft antistatic cloth.
•   Do not dismantle the device or accessories. Otherwise, the warranty on the device 
and accessories is invalid and the manufacturer is not liable to pay for the damage.
•   If the device screen is broken by colliding with hard objects, do not touch or try to 
remove the broken part. In this case, stop using the device immediately, and then 
contact an authorized service center in time.
Emergency CallYou can use your device for emergency calls in the service area. The connection, 
however, cannot be guaranteed in all conditions. You should not rely solely on the 
device for essential communications.
Certification Information (SAR)This device meets guidelines for exposure to radio waves.
Your device is a low-power radio transmitter and receiver. As recommended by 
international guidelines, the device is designed not to exceed the limits for exposure to 
radio waves. These guidelines were developed by the independent scientific 
organization International Commission on Non-Ionizing Radiation Protection  
						

							71
(ICNIRP) and include safety measures designed to ensure safety for all users, 
regardless of age and health.
The Specific Absorption Rate (SAR) is the unit of measurement for the amount of 
radio frequency energy absorbed by the body when using a device. The SAR value 
is determined at the highest certified power level in laboratory conditions, but the 
actual SAR level of the device when being operated can be well below the value. This 
is because the device is designed to use the minimum power required to reach the 
network.
The SAR limit adopted by USA and Canada is 1.6 watts/kilogram (W/kg) averaged 
over one gram of tissue. The Highest SAR value reported to the FCC and IC for this 
device when tested for use at the ear is 0.508 W/kg, when properly worn on body is 
0.848 W/kg, and when using Wi-Fi hotspot function is 1.050 W/Kg.
The SAR limit also adopted by Europe is 2.0 W/kg averaged over 10 grams of tissue. 
The highest SAR value for this device type when tested at the ear is 0.650 W/kg, and 
when properly worn on the body is 0.712 W/kg.
FCC StatementThis equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However,there is no guarantee that 
interference will not occur in a particular installation.If this equipment does cause 
harmful interference to radio or television reception,which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may 
cause undesired operation. 
						

							72
 CautionChanges or modifications made to this device not expressly approved by 
Huawei Technologies Co., Ltd. may void the FCC authorization to operate 
this device.
Disposal and Recycling Information
This symbol on the device (and any included batteries) indicates that they should not 
be disposed of as normal household garbage. Do not dispose of your device or 
batteries as unsorted municipal waste. The device (and any batteries) should be 
handed over to a certified collection point for recycling or proper disposal at the end of 
their life.
For more detailed information about the recycling of the device or batteries, contact 
your local city office, the household waste disposal service, or the retail store where 
you purchased this device.
The disposal of this device is subject to the Waste from Electrical and Electronic 
Equipment (WEEE) directive of the European Union. The reason for separating 
WEEE and batteries from other waste is to minimize the potential environmental 
impacts on human health of any hazardous substances that may be present.
Reduction of Hazardous SubstancesThis device is compliant with the EU Registration, Evaluation, Authorisation and 
Restriction of Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of the 
European Parliament and of the Council) and the EU Restriction of Hazardous 
Substances (RoHS) Directive (Directive 2002/95/EC of the European Parliament and 
of the Council). For more information about the REACH compliance of the device, visit 
the Web site 
www.huaweidevice.com/certification. You are recommended to 
visit the Web site regularly for up-to-date information.
EU Regulatory ConformanceHereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with 
the essential requirements and other relevant provisions of Directive 1999/5/EC. 
						

							73
For the declaration of conformity, visit the Web site www.huaweidevice.com/certification.
 Observe the national local regulations in the location where the device is to be 
used. This device may be restricted for use in some or all member states of the 
European Union (EU).
 This device may be operated in all member states of the EU.
France: Outdoor use limited to 10 mW e.i.r.p. within the band 2454-2483.5 MHz.Italy: For private use, a general authorisation is required if WAS/RLAN’s are used 
outside own premises. For public use, a general authorisation is required.
Luxembourg: General authorisation required for network and service supply.Norway: This subsection does not apply for the geographical area within a radius of 
20 km from the centre of Ny-Ålesund.
13.2  FAQ
How Can I Use a microSD Card to Import Contacts to My Phone from a 
Different Mobile Phone?
Your mobile phone only supports contact files in the .vcf format.1. Save the contacts you want to import to your mobile phone to a microSD 
card as a .vcf file.2. Insert the microSD card into your mobile phone and find the .vcf file 
using File Manager.3. Touch the .vcf file. The phone displays a message asking whether you 
want to import the contacts.
4. Touch OK to import the contacts. Compatibility problems may occur with .vcf files created by different mobile 
phones and certain contact information may be lost after contacts are imported. 
 You can also use Bluetooth to share and import contacts. 
						

							74
How Can I Use Hi Suite to Import Contacts to My Phone from a Different 
Mobile Phone?
Your mobile phone only supports contact files in the .vcf format.1. Save the .vcf file containing the contact information you want to import 
to a PC.
2. On the Home screen, touch   > Settings > Applications > Development 
> USB debugging.3. Use a USB cable to connect your phone to the PC.4. Visit http://www.huaweidevice.com/worldwide. to download and install 
Hi Suite.
5. Open Hi Suite and follow the instructions to complete the installation.6. Hi Suite will start automatically after the installation is complete. Click Contacts. Right-click the contact list and choose Import. Follow the 
instructions and select the .vcf file you want to import.7. Disconnect your mobile phone from the PC after the contacts have been 
imported.
How Do I Set a Song As a Phone Ringtone?In Huawei Music, touch and hold the song to be set as a ringtone, and then touch Set 
as ringtone.
How Do I Prevent Automatic Change of Screen Orientation When Rotating My 
Phone?
On the Home screen, touch   > Settings > Display > Auto-rotate screen to 
disable the function.
How Do I Set an Unlock Pattern?
On the Home screen, touch   > Settings > Location & security > Set up screen 
lock > Pattern.
How Can I Change the Input Method?Touch and hold the area where you write text and then select the input method you 
prefer. 
						

							75
How Do I Stop the Song Playing in the Background?Touch the notification bar, flick downwards to open the notifications panel, touch the 
music playing notification to go to the music playing screen, and then stop playing the 
song.
How Do I Return to the Call Screen?While in a call, if you’re on another screen, you can touch the notification bar, and flick 
downwards to open the notifications panel. Then touch the current call notification to 
return to the call screen.
How Do I Create an Application Shortcut on the Home Screen?Touch and hold an application icon on the application screen until the Home screen is 
displayed. Then drag the icon to where you want to place it and release your finger.
How Do I Hide the Keyboard?
Touch  to hide the keyboard. 
						

							V100R001_02