Huawei U31007 User Manual

							Your Phone
 6
• The charging time depends on the environmental tempera-
ture and the age of the battery.
• Do not strike, throw or cause any kind of violent shock to the 
battery, otherwise liquid leakage, body damage, over-
heating, fire or explosion may occur.
• The battery can be recharged but eventually wears out. If the 
battery lasts for a shorter time period than usual after being 
charged normally, replace it with a battery of the same type.
• Charge the battery by using the charger supplied with your 
phone.
Before charging the battery with a cable charger, ensure that 
the battery has been properly loaded into your phone.
To charge the battery, first plug in the charger connector to a 
power socket, and then insert the plug of the cable into the 
connector of the phone as shown in the following figure. The 
figure is for reference only. The actual appearance is subject to 
your mobile phone and accessories delivered.
  
						

							7
Your Phone
NOTE:  
•The plug of the charger is in trapezium shape. Reversely 
inserting the plug may damage the mobile phone and 
charger.
• When the battery power level is very low, the phone makes 
alert sounds and displays a prompt. When the battery power 
level is too low, the phone will power off automatically.
• When the battery is being charged, the charging indicator 
blinks continuously. When the charging indicator stops 
blinking, it indicates that the battery is full.
Screen
The icon bar displays the phone status. The following table 
illustrates the icons that may appear on this bar.
Indicates signal 
strength.The normal profile 
is activated.
2. Desktop
4. Prompt bar
3. Swapper 1. Icon bar 
						

							Your Phone
 8
Indicates power 
level of the 
battery.The headset is 
plugged in.
The phone is 
currently in a 
GSM or WCDMA 
network.Yo u r  P C  c o n n e c t s  t o  
the Internet 
through your 
phone.
You are using the 
roaming service.Yo u  h a v e  n e w  t e x t  
messages.
Bluetooth is 
enabled.Yo u  h a v e  n e w  
multimedia 
messages.
The phone is in a 
call.Yo u  h a v e  n e w  
Emails.
Alarm clock is 
enabled.Yo u  h a v e  n e w  P U S H  
messages. 
						

							9
Swapper
Swapper
The Swapper provides quick access to the most frequently used 
items. You can show Swapper in any where. 
To add a new shortcut icon, you can select Options > Add 
items to swapper  to select an application.
To remove a shortcut icon, you can select  Options > Remove 
from swapper .
NOTE:  Some default shortcuts cann ot be removed from the 
Swapper bar. 
						

							Security
 10
Security
Phone/SIM Card Security SettingsNOTE:  
• For certain SIM cards, you need to enter the PIN2 code to use 
certain special functions.
• If you enter a wrong PIN code or wrong PIN2 code for three 
consecutive attempts, the SIM card is locked. To unlock the 
SIM card, enter the PIN Unblocking Key (PUK) code or PUK2 
code.
• The PIN code, PIN2 code, PUK code, or PUK2 code is provided 
together with the SIM card. For details, consult your service 
provider.
• The initial phone password of the phone is 0000.
Select Settings > Advanced settings > Security > Phone and 
SIM card.
• Reset your phone to the factory settings.
• Enable or disable the "Phone lock" and "PIN lock".
• Modify the screen password, phone password, and PIN2 
code.
• If your SIM card supports the Fixed Dialer Number (FDN) 
function, you can set the limit for phone numbers.
Digital Rights ManagementSelect Settings > Advanced settings > Security > DRM 
settings. Enter the correct phone password and press OK key 
to confirm, and you can select roaming network or delete all 
licenses.  
						

							11
Text Input
Digital Rights Management (DRM) can protect the digital 
content from piracy and protect the provider’s interests. The 
digital content includes Java applications and multimedia 
content such as images, audio and video. If the protected 
content cannot be accessed, it indicates that the 
corresponding license is overdue or used up.
Text Input
NOTE:  While entering text:
• Press the * key to switch between input methods. Press and 
hold the * key to enable or disable the Zi input mode.
• Press repeatedly the * key and you will see "Abc","abc", "ABC" 
or "123" on the upper right corner of the screen successively. It 
indicates the words to be entered will be first letter capital-
ized, in lower case or in upper case.
• Press the # key to display the symbols list. Press and hold the 
# key to set the input language.
• Press the Clear key to delete the letter before the cursor.
Zi® Input MethodWith the Zi input method, you can easily and quickly enter 
words. Zi is a predictive text entry mode. Press the relevant key 
that corresponds to the desired letter and Zi will offer you 
candidate words. 
Press each key carrying the desired letter once, and then the 
predictive text scheme will present the candidate words 
composed by the letters you have entered in the drop-down 
menu.  
						

							Text Input
 12
Traditional Input MethodWhen Zi input method is off, you can use the traditional input 
method for entering alphabetic characters. Repeatedly press 
the key that carries the letter to be entered when it appears on 
the screen. 
Number Input MethodIn a text editing screen, press and hold the character/number 
keys to enter corresponding numeric characters. 
You can also press successively the * key to switch to the "123" 
numeric input method, and enter corresponding numeric 
characters by pressing the character/number keys.
Symbol Input MethodYou can press the # key to display the symbols list and then 
select symbols to input. 
You can also press the key with number 1 to input the 
commonly-used symbols in a text editing screen (except 
numeric input method). 
						

							13
2. Customized Settings
Phone Settings
Select Settings, or Settings > Advanced settings, you can 
change the settings of the phone.
• Select or set profiles. 
• Set the system date and time. 
• Set the phone language. 
• Set the language used to enter text. 
• Set the keypad tone of the phone. 
• Set the applications settings.
• Set your phone to power on or off automatically.
NOTE:  In the standby mode, you can press and hold the # key to 
switch between the current profile and the silent profile. If the 
current profile is offline, you cannot use this function.
Display Settings
Select Settings > Display. You can change the settings for the 
phone display.
• Set the wallpaper layout for the home screen.
• Set the screensaver of the phone. 
• Set the brightness of the screen.
• Set the backlight delay time for the screen.
• Set the keypad lock period. 
						

							Network Settings
 14
Network Settings
Select Settings > Network. You can change the settings for the 
network. Following options are available: Mode, Select 
network, and Preferred operators. 
						

							15
3. Call Function
Managing Contacts
Creating a ContactTo add a new contact, perform one of the following operations: 
• Enter a number in standby mode, and then select Options 
> Save number or press the OK key to save. 
•Select Options > Create contact in Contacts screen.
• Select a record from Calls screen, and then select Options 
> Add to contact to add number to a existing contact.
Searching for a ContactYou can find a contact from the contacts list by using this 
function on the Contacts screen. Enter the contact name you 
are searching for directly. The contact is displayed.
You can also use quick search in the contacts list screen. You 
can find a contact by entering the initials of the first name or the 
last name of the contact.
Managing a GroupIn the Contacts screen, press the left or right scroll key to select 
Groups. And then select a group:
•Select Options for the following options: New group, Edit 
and Settings.
• Press the OK key to view the details. And then select 
Members to add members. To delete a group member, 
select a member from the group member list, and then 
select Options > Delete member.