Huawei U12509 User Manual

 Your Phone  
5 
   Your phone supports a memory card (microSD) with a capacity up to 8 GB.  
To load or remove the memory card, please refer to the following figure.   
 Antenna The picture shows the antenna area marked in grey.  Please do not touch the antenna unnecessarily.       

 Your Phone  
6 
 
Charging the Battery NOTE:   • When you charge the battery for the first time, please charge it for a minimum of 12 hours. • The battery discharges even while not being used. If you have not used it for a long time, please recharge it first. • Do not strike, throw or cause any kind of violent shock to the battery, otherwise liquid leakage, body damage, overheating, fire or explosion may occur. • The battery can be recharged but eventually wears out. If the battery lasts for a shorter...

 Your Phone  
7 
into the connector of the phone as shown in the following figure. The figure is for reference only. The actual appearance is subject to your mobile phone and supplied accessories. 
 
NOTE:   
• The plug of the charger is in trapezium shape. Reversely inserting the plug may damage the mobile phone and charger. • When the battery power level is very low, the phone makes alert sounds and displays a prompt. When the battery power level is too low, the phone will power off automatically. •...

 Your Phone  
8 
Screen 
1. Icon bar 
 
2. Desktop 
 
3. Prompt bar 
The icon bar displays the phone status. The following table illustrates the icons that may appear on this bar. 
 
 Indicates signal strength.  The normal profile is activated. 
 Indicates power level of the battery.  The headset is plugged in. 
 
The phone is currently in a GSM or WCDMA network. 
 Your PC connects to the Internet through your phone.         

 Your Phone  
9 
 You are using the roaming service.   You have new text messages. 
 Bluetooth is enabled.   You have new voice mails. 
 Call line 2 is enabled currently.  You have new multimedia messages. 
 
Forwarding all incoming voice calls to line 1 or line 2. 
 You have new Emails. 
 The phone is in a call.  You have new PUSH messages. 
 Alarm clock is enabled.   
              

 Security 
10 
Security 
Phone/SIM Card Security Settings 
NOTE:   • For certain SIM cards, you need to enter the PIN2 code to use certain special functions. • If you enter a wrong PIN code or wrong PIN2 code for three consecutive attempts, the SIM card is locked. To unlock the SIM card, enter the PIN Unblocking Key (PUK) code or PUK2 code. • The PIN code, PIN2 code, PUK code, or PUK2 code is provided together with the SIM card. For details, consult your service provider. • The initial phone password of...

 Text Input 
11 
multimedia content such as images, audio and video. If the protected content cannot be accessed, it indicates that the corresponding license is overdue or used up. 
Text Input 
NOTE:  While entering text: • Press the * key to switch between input methods. Press and hold the * key to enable or disable the T9 input mode. • Press repeatedly the * key and you will see abc,Abc, ABC or 123 on the upper left corner of the screen successively. It indicates the words to be entered will be in...

 Text Input  
12 
Traditional Input Method 
When T9 input method is off, you can use the traditional input method for entering alphabetic characters. Repeatedly press the key that carries the letter to be entered when it appears on the screen.  
Number Input Method 
In a text editing screen, press and hold the character/number keys to enter corresponding numeric characters.  
You can also press successively the * key to switch to the 123 numeric input method, and enter corresponding numeric characters by...

 
13 
2. Customized Settings 
Phone Settings 
Select Settings > Phone settings. You can change the settings of the phone. • Set the system date and time format of the phone. If you have removed the battery from the mobile phone, you may need to set the time after power on the mobile phone. • Select different profiles for the phone to suit different environmental situations.  • Set the phone language.  • Set the language used to enter text.  • Set the keypad tone of the phone.  • Set the keypad lock...

 Network Settings 
14 
• Turn the keypad backlight on or off.  • Set the backlight delay time for the screen. • Turn the alert on and off. • Enter a greeting message that appears on the screen when you power on your phone.  • Enter a message that appears on the screen when you power off your phone. 
Network Settings 
Select Settings > Network. You can change the settings for the network. Four options are available: Mode, Select network, Cell information, and Operator list.