Huawei E5330bs6 Owners Manual

 
10 
Charging the Battery 
If the Mobile WiFi has not been used for a long time or if the battery is fully depleted, the 
Mobile WiFi may not power on immediately after the charger is plugged in. Please charge the 
battery for a while before attempting to power on the Mobile WiFi. 
Method 1: Use the charger to charge the device 
Note: 
 Only use chargers compatible with the 
Mobile WiFi and provided by a 
designated manufacturer. Use of an 
incompatible charger or one from an 
unknown manufacturer may...

 
11  contact an authorized dealer to buy a charger compatible with the Mobile WiFi. 
 The Mobile WiFi’s charger model is HW-050100XYW. X and Y represent letters or 
numbers that vary by region. For details about the specific charger model, contact an 
authorized dealer. 
Method 2: Charge the device through a computer connection 
Use the data cable provided with your device to connect the Mobile WiFi to the computer. 
  

 
12 
Connecting to the Internet via Wi-Fi 
The Mobile WiFis management parameters have been preset according to your operators 
requirements. You can quickly connect to the Internet by following these steps: 
Step 1: Turn on the Mobile WiFi 
Press and hold the  button until the 
indicator lights up, indicating that the Mobile 
WiFi is turned on. 
You can log in to the web management page 
and turn the fast boot function on or off. This 
function greatly reduces the Mobile WiFis 
boot-up time. 
Note:...

 
13 
Step 2: Establish a Wi-Fi connection (using a computer running the 
Windows 7 operating system as an example) 
1.  Ensure that   is displayed in green. 
2.  Select Start > Control Panel > Network and Internet > Network and Sharing Center > 
Connect to a network. 
Note: 
 Before establishing a Wi-Fi connection, ensure that the computer is equipped with a 
wireless network adapter. If the computer indicates a wireless network connection, the 
wireless network adapter can be used. Otherwise, verify...

 
14  4.  Wait a moment for the wireless network connection icon to appear in the system tray in 
the lower right corner of the computer screen. The wireless network connection is then 
established. 
Step 3: Connect to the Internet 
If data is transmitted, the Mobile WiFi will automatically connect to the Internet. If data is not 
transmitted for a period of time, the Mobile WiFi will automatically disconnect from the 
network connection. 
Note: 
 You can log in to the web management page and enable or...

 
15 
Logging In to the Web Management Page 
1.  Make sure the connection between the Mobile WiFi and the Wi-Fi device or computer is 
working normally. 
2.  Open the browser, and enter http://192.168.1.1 in the address box. 
3.  Enter the user name and password to log in to the web management page. 
Note: 
 The default user name is admin.  The default password is admin. 
 
 
 
 
  

 
16 
Battery Saving Mode 
If the Mobile WiFi has been inactive for some time, the Mobile WiFi enters the standby mode, 
the power indicator () blinks slowly and the other indicators are off. Pressing the  
button causes the indicator to light up. 
When the Mobile WiFi is being powered only by the battery, you can choose to enable or 
disable the automatic Wi-Fi turnoff function. If this function is enabled and if no Wi-Fi devices 
access the Mobile WiFi for a period of time, the Wi-Fi turns off...

 
17 
Connecting an Android Device to the Mobile WiFi Using a 2D 
Barcode 
1.  Search for HUAWEI Mobile WiFi in 
Google Play or HUAWEI App Center and 
download the app to your Android 
device. 
2.  Scan the 2D Barcode on the Mobile WiFi 
rear label using the HUAWEI Mobile WiFi 
App. 
 
Your Android device will then connect to the 
Mobile WiFi. 

 
18 
Restoring to Factory Settings 
If you forget the user name, password, or SSID 
you have set, you can restore the settings on the 
web management page to their factory values.   
To do so, simply press and hold the RESET 
button until the Mobile WiFi restarts. 
 
RESET
RESET 

 
19 
Example 1: Connecting to a Game Console (for example, PSP) 
through Wi-Fi 
1.  On the PSP, turn on the WLAN. 
2.  Choose Settings > Network Settings. 
3.  Select Infrastructure Mode. 
4.  Select New Connection, and enter the 
connection name. 
5.  Select Scan to search for wireless 
networks. A list of access points will be 
displayed on the screen. 
6.  Select the access point with the Mobile 
WiFis SSID, and press the ► button on 
the PSP. Confirm the SSID, and enter the 
correct wireless network...