Huawei B315 Owners Manual

 
 
 B315 LTE CPE  
Quick Start  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3150**** _01  

1 
1 Getting to know your B315  
 
   
Power indicator  
 On: the B315 is powered on.   Off: the B315 is powered off.  
  
Network mode 
indicator  
 Steady cyan: connected to an LTE network.   Steady  green: connected to an Ethernet network.   Steady red:  – The SIM card is not recognized, the PIN has not 
been entered, or the PIN verification failed.  
– Failed to connect to a mobile network or an 
Ethernet network. 
  
Wi -Fi/WPS 
indicator  
 Steady on: Wi -Fi  turned on.   Blinking: a WPS...

2 
 
 
LAN/WAN 
indicator  
 Steady on:   – At least one of the LAN ports is connected to a 
device. 
– WAN port is connected to an Ethernet port.   Blinking: data is being transmitted through a LAN 
port or the WAN port.  
 Off:  – No device is connected to a LAN port.  – WAN port is not connected to an Ethernet port.  
  
Signal strength 
indicator  
 On: signal reception available (more bars mean 
better reception).  
 Off: no reception.  
 SIM card slot Install a standard SIM card to access the...

3 
 
USB port
  Connect to a USB storage device, or USB printer.
 
 This port cannot be connected to USB host devices 
such as computers. 
 The B315 supports USB 1.0/USB 2.0 storage devices 
in FAT32 format of up to 32 GB. Storage devices with 
power supply requirements exceeding USB standards 
may not work properly. It is recommended that you 
prepare an external power supply in these cases.  
 The B315 is compatible with samba-supported USB 
printers.  
 Telephone port  Not in use . 
2  Installation...

4 
Step 2: Connecting cables  
 
 
 
Once connected to a power outlet, the B315 automatically powers on.  
Warning:  This equipment may not work when mains power  fails. 
 
 Power adapter
 
 Computer
 
 USB flash drive
 
 Laptop, tablet, or smart 
phone
 
 
  To prevent interference caused by radio signals, place the B315 at least 1 meter 
(3.28 feet) away from telephone and other electrical devices.  
 Use only the power adaptor supplied by th e manufacturer for this device. The 
B315's power...

5 
Optional: Installing the external antenna  
In areas with poor reception, connect external antenna to the B315's external 
antenna port to improve signal reception. 
 
1 .  Power off the B315 and disconnect it from the power outlet.  
2 .  Use a small tool, such as a key o r a paper clip, to remove the cover from the 
antenna ports. Keep the cover in a safe place.  
3 .  Screw external antenna fully into the antenna port.  
4 .  Keep external antenna upward to get better signal.  
 
 The external...

6 
Scenario 2: Accessing the Internet using Ethernet  
Connect the B315 to a wall -mounted Ethernet port or an ADSL modem for Internet 
access.  
 
 
 
Once connected to a power outlet, the B315 automatically powers on.  
Warning:  This equipment may not work when mains power fails . 
 
 Power adapter   Computer  USB flash drive  
 Ethernet port 
on the wall
 
 Laptop, tablet, 
or smart phone
  
 
 
  To prevent interference caused by radio signals, place the B315 at least 1 meter 
(3.28 feet) away from...

7 
3 Setting up a Wi -Fi connection 
Step 1: Enabling Wi -Fi on the B315 
When the   indicator is steady on, the Wi -Fi function of the B315 is turned on.  
 
Step 2: Recording the SS ID and Wi-Fi key  
The default SSID and Wi -Fi key are printed on the B315's bottom label.  
 
 
Step 3: Setting up a Wi -Fi connection on your client  
 Method 1: Setting up a Wi -Fi connection manually  
1 .  From your Wi -Fi enabled client, scan for wireless networks in your area.  
2 .  Connect to the network name...

8   
 
  Method 2: Setting up a Wi -Fi connection through W PS 
If the client supports WPS, you can set up a WPS connection as follows:  
1 .  Ensure that Wi -Fi is enabled on the client.  
2 .  Press and hold the WPS button for 2 or more seconds. The   indicator then 
starts blinking.  
3 .  Activate the WPS connection on the client in 2  minutes. 
 For instructions about how to enable a WPS connection on the client, see the client's user guide.