Huawei 560 Manual

11 
2.  Select Start > Control Panel > Network Connections > Wireless Network Connection. 
Note: To set up a Wi-Fi connection, the PC must have a wireless network adapter installed. 
If Wireless Network Connection is displayed, a wireless network adapter is available. 
Otherwise, check to make sure you have a wireless network adapter installed. 
3.  Click View available wireless networks to display a list of wireless networks available. 
4.  Select a network that has the same SSID as that of the Mobile...

12 
Step3: Access the Internet 
After you establish a Wi-Fi connection successfully, you can access the Internet using the 
following modes. 
Caution: Please select a proper Internet connection mode based on your service expense. 
For example, if you are subscribed to the time-based network service, you are 
recommended to select Manual mode. For details about the service expense, consult your 
service provider. 
 
Mode Operations 
Auto 
 After the Mobile WiFi is powered on, it will connect to the...

13 
Note:  Launch the web management page to select the mode for accessing the Internet.  You can choose whether to enable the Mobile WiFi to connect to the Internet 
automatically even while you are roaming. If this function is disabled, the Mobile WiFi 
automatically disconnects from the Internet while you are roaming. To access the 
Internet, set up a connection manually. 
Accessing the Web Management Page 
1.  Make sure that the connection between the Mobile WiFi and the client is a proper 
one....

14 
Daily Use 
Power Saving Mode 
If no operation is performed on the Mobile WiFi within a preset period, the screen turns off. 
Press any key to light up the screen. 
If the Mobile WiFi is powered by the battery only, choose whether to enable the Mobile 
WiFi to turn off Wi-Fi automatically. If this function is enabled and no Wi-Fi devices access 
the Mobile WiFi for a preset period, the Mobile WiFi turns off Wi-Fi automatically. You can 
press any key to turn on Wi-Fi again. 
Validating the PIN Code...

15 
WPS
Establishing a WPS Connection 
If a Wi-Fi client connected to the Mobile WiFi supports the WPS function, a network key 
will be automatically generated without manual input. To establish a WPS connection, 
perform the following steps: 
1.  Power on the Mobile WiFi. 
2.  Start the client. 
3.  Enable the WPS function of the Mobile WiFi.   
Note: After Wi-Fi is enabled, press and hold 
WPS 
to enable the WPS function of the Mobile WiFi. 
4.  Enable the WPS function of the client. 
Note: For WPS...

16 
Restoring Factory Defaults 
If you forget the changes you have made to some 
parameters, you may restore factory defaults and 
reconfigure the Mobile WiFi. To restore the factory 
defaults, press and hold the RESET button until the 
screen turns off. All factory default settings are 
successfully restored. 
Note: Restoring factory defaults deletes all personal configuration settings and restores all 
web-based management settings and parameters to their default values.  

17 
Example 1: Wi-Fi Connection to Game Machine (Sony 
PSP) 
1.  Turn on the PSP WLAN switch. 
2.  Select Settings > Network Settings. 
3.  Select Infrastructure Mode to connect to 
your local Wi-Fi access point. 
4.  Select New Connection to specify an 
easy to remember connection name. 
5.  Select Scan to detect all networks within 
range. The access point list is displayed. 
6.  Select the SSID in the same way as you 
did for the Mobile WiFi. First press the ► 
button of your game machine to confirm...

18 
 WEP: The Wi-Fi key of the Mobile WiFi.  The default SSID and key label are affixed 
to the Mobile WiFi. 
7.  Press the ► button of your game 
machine to continue, and then press the 
X button to save the settings. 
8.  Select Te s t  C o n n e c t i o n to check the 
connection. 
9.  Go to Internet Browser. 
  

19 
Example 2: Wi-Fi Connection to a Smart Phone (iPhone) 
1.  Select Settings > Wi-Fi, and then turn on 
Wi-Fi. 
2.  Automatically detect the networks in range 
and display the access point list. 
3.  Select a network that the Mobile WiFi is 
using. 
4.  If necessary, enter a password and tap Join. 
(Networks requiring a password appear with 
a lock icon.) 
Note: Some Wi-Fi clients such as iTouch, PS3 and 
NDS can also access the Internet via the Mobile 
WiFi. For details, see the user guides of the...

20 
Tips 
If the Mobile WiFi is placed in an environment with poor ventilation, it may overheat after 
extended use. When the Mobile WiFi overheats, it will switch off and disconnect from the 
network automatically to protect itself. If this happens, place the Mobile WiFi in a 
well-ventilated location, then restart the Mobile WiFi. 
If you are experiencing difficulties using the Mobile WiFi, try the following: 
 See help on the web management page.  Restart the Mobile WiFi.  Restore the factory...