HP X23led User Guide

ENWWConnecting Monitor Cables 5
Connecting Monitor Cables
Connecting the VGA (Analog) Cable or DVI-D (Digital) Cable
Use a VGA video cable or a DVI-D cable to connect your monitor to your computer. To 
use DVI, you must have a DVI-compliant graphic card. Connectors are located on the 
back of the monitor. Be sure the computer and monitor are turned off and unplugged.
1. To connect the VGA cable (provided with select  models) 
Connect one end of the VGA video cable to the back of the monitor and the...

6 Chapter 3.   Setting Up the MonitorENWW 
 
Figure 3-4 Connecting the power cable
2. Connect one end of the power cable to the adapter and the other end to a 
grounded electrical outlet.
3. Connect the adapter plug to the monitor DC Jack.
 

ENWWCD Software and Utilities 7
4. Operating the Monitor
CD Software and Utilities
The CD that is included with this monitor contains drivers and software that you can 
install on your computer.
Installing Drivers
If you determine that you need to update the dr ivers, you can install the monitor driver 
INF and ICM files from the CD, or  download them from the Internet.
Installing the monitor driver software from the CD
To install the monitor driver software from the CD:
1. Insert the CD in your...

8 Appendix 4.   Operating the Monitor ENWW
 
Front-Panel Controls
 The monitor buttons are located on the bottom of the front panel
Figure 4-1 Front-panel control 
button
Hot Key definition:
Auto: Auto configure; Press for 3 seconds, Source select
- :  ECO mode select when OSD is not active
+:  Image ratio select when OSD is not active
No. Icon Description
1Power Turns the monitor on or puts it in standby or sleep mode. The Power 
depending on the model.
2Menu Opens, selects, or exits the OSD menu.
3+...

ENWWUsing the On-Screen Display (OSD) 9
Using the On-Screen Display (OSD)
Main
Menu Item Main
Menu Icon 1st Sub
Menu Item 2nd Sub
Menu Item Description Adjust 
Range Reset Value
Luminance Contrast N/A Contrast from Digital-register. Each step will increase/
decrease value by 10-100 Recall Warm 
Contrast Value
Brightness N/A Backlight Adjustment Each step will increase/
decrease value by 1 0-100 Recall Warm 
Brightness Value
Eco Mode N/A Picture Adjustment, Brightness = 90,
Contrast = 50.
Brightness,...

10 Appendix 4.   Operating the Monitor ENWW
 
Main
Menu Item Main
Menu Icon 1st Sub
Menu Item 2nd Sub
Menu Item Description Adjust 
Range Reset Value
Image  Setup Clock N/A Adjust picture Clock to reduce 
Vertical-Line noise.
Each step will increase/
decrease value by 1 0-100 Do Auto 
Configure
Phase N/A Adjust Picture Phase to  reduce Horizontal-Line noise. 0-100 Do Auto 
Configure
H. Position N/A Adjust the horizontal position  of the picture. 0-100 Do Auto 
Configure
V. Position N/A Adjust the...

ENWWUsing the On-Screen Display (OSD) 11
Main
Menu Item Main
Menu Icon Sub
Menu Item Description Adjust 
Range Reset Value
Color Temp. Warm Recall Warm Color  Temperature.N/A The Color 
Temperature will 
be set to Warm.
The User R/G/B 
value (default is 
50) will be 
modified by Reset 
function in user 
mode.
Normal Recall Normal Color 
Temperature. N/A
Cool Recall Cool Color  Temperature. N/A
sRGB
(for select 
models with 
sRGB 
function) Recall sRGB Color 
Temperature.
N/A
Red Red Gain from Digital-...

12 Appendix 4.   Operating the Monitor ENWW
 
Main
Menu Item Main
Menu Icon Sub
Menu Item Description Adjust 
Range Reset Value
OSD Setup H. Position Adjust the horizontal position  of the OSD.
Each  step will increase/
decrease value by 50-100 Recall 50 Value
V. Position Adjust the vertical position of  the OSD.
Each  step will increase/
decrease value by 5 0-100 Recall 50 Value
Timeout Adjust the OSD timeout. Each  step will increase/
decrease value by 5 5-100 Recall 10 Value
Language Set OSD display...

ENWWUsing the On-Screen Display (OSD) 13
Main
Menu Item Main
Menu Icon Sub
Menu Item Description Adjust 
Range Reset Value
Extra Input Select  Select video input signal. D-SUB Note: Analog- Only Model no 
Input Select 
item.
DVI 
DDC/CI Select DDC/CI on or off On Off
Reset Clear each old status of Auto- configuration and set the color 
temperature to Warm. Ye s N / A
Do not execute reset, return 
to main menu. No
Information Show the resolution, H/V  frequency. N/A N/A
 

14 Appendix 4.   Operating the Monitor ENWW
 
Selecting Video Input Connectors
The input connectors are:
• VGA connector (analog)
• DVI-D connector (digital) 
The monitor automatically determines which inputs have valid video signals, and 
displays the image.
You can connect the VGA cable, the DVI-D cable, or both. If both cables are installed, 
the default input selection is DVI.The source  of input can be switched using the Input 
Select option in the OSD menu.
Identifying Monitor Conditions
Special...