HP W2228h User Guide
Here you can view all the pages of manual HP W2228h User Guide. The HP manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 41
Operating the Digital Picture Frame Card Reader (Select Models) User’s Guide5–5 4.Press a navigation button to select an audio file. a.The DPF card reader adds a check mark in front of the title. b.Press OK to add to the slide show music list. c.Press the Back button to de-select. d.From bottom of list, use the Down Arrow button to scroll to next page. Other wise, the selection wraps around to the top of list. e.Press OK button again. 5.The Navigation sub-menu appears at bottom of screen. 6.Press any of...
Page 42
Operating the Digital Picture Frame Card Reader (Select Models) 5–6User’s Guide 3.Use the navigation buttons to move to the Settings icon and then press the OK button. Or press the Setup button on the remote. 4.The Settings Menu shows the current settings. 5.Press a navigation button to select an option you want to change: ❏Language ❏Display Image Size ❏Slideshow Transitions ❏Slideshow Speed ❏Slideshow Shuffle ❏Adjust LCD Color ❏Factory Default Changing the language setting 1.Use the navigation buttons...
Page 43
Operating the Digital Picture Frame Card Reader (Select Models) User’s Guide5–7 Changing the slideshow transition 1.Use the navigation buttons to select the Slideshow Transition setting. When it is selected, it is highlighted in blue. 2.Press the Right Arrow button to scroll through the slideshow transition choices. The current choices are: ❏Normal* (no transitional effect) ❏Random (randomly uses all transitions below) ❏Fade (new image supersedes old image) ❏Curtain (new image moves from left to right...
Page 44
Operating the Digital Picture Frame Card Reader (Select Models) 5–8User’s Guide Adjusting the LCD settings for DPF 1.Use the navigation buttons to select Adjust LCD setting. When it is selected, it is highlighted in blue. 2.Press the Right Arrow button to view the LCD Setting choices. The current choices are: ❏Brightness ❏Contrast ❏Tint ❏Color 3.Use the navigation buttons to select the LCD setting you want to change. 4.Use the navigation buttons to adjust the setting you selected. Moving to the left...
Page 45
User’s Guide6–1 6 Preparing the Monitor for Shipping Keep the original packing box in a storage area. You may need it later if you move or ship your monitor. Folding the Monitor You don’t have to remove this monitor base for shipping. Fold the double-hinged monitor in its original shipping position. 1.Turn the monitor to a horizontal position with no tilt. 2.Lower the monitor all the way until the hinge is flat. The monitor screen should still be vertical to the desktop so you can access the hinge....
Page 46
Preparing the Monitor for Shipping 6–2User’s Guide 3.Place the shipping strap around the base, pull it tight, and connect it by sliding the strap ends through the slips. 4.Lower the monitor screen down flat, horizontal to the desktop. 5.Pivot the monitor to the portrait position (in the figure, you would be facing the monitor where the straight arrow is). (Perform this step only if you have the pivot feature.) 6.Place the folded monitor, screen-side up, in its original shipping box.
Page 47
User’s GuideA–1 A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions: ProblemSolution Power LED is not on. Make sure the Power button is on, and the power cord is properly connected to a grounded power outlet and to the monitor. Select Management in the OSD menu, and then select Bezel Power LED. Check if the Bezel Power LED option is set to Off and, if so, set to On mode. Screen is blank. Connect the...
Page 48
Troubleshooting A–2User’s Guide Unable to hear audio from built-in speakers.Do the following: ■Ensure the source signal is good by using headphones at the source. ■Press the Menu button to access the OSD menu. Select Management, and then select Vo l u m e to adjust the volume. ■Turn up the volume with the front panel volume button. ■Ensure speaker volume is not muted or too low: Click the Windows Vista start button, Control Panel, and Hardware and Sound. Under Audio Devices and Sound, click Adjust...
Page 49
Troubleshooting User’s GuideA–3 Getting Support from hp.com Before you contact customer service, refer to HP Technical Support at: http://www.hp.com/support Select your country/region, and then follow the links to the support page for your monitor. Preparing to Call Technical Support If you cannot solve a problem by using the troubleshooting tips in this section, you might have to call technical support. For technical support contact information, refer to the printed documentation included with the...