HP W1858 User Guide

Operating the Digital Picture Frame Card Reader (Select Models)
User’s Guide5–3 3.The action control buttons let you perform various tasks: go to the Settings Menu (J), go to the Main Menu on the 
monitor (K), start a slide show (L), save photo changes on your media card (M), manipulate the size of a photo 
image (N), and rotate a photo image (O).
4.The sound and media adjust control buttons allow you to: raise the volume (P), lower the volume (Q), mute the 
sound (R), stop the slide show (S), and search...

Operating the Digital Picture Frame Card Reader (Select Models)
5–4User’s Guide 6.The selected image appears on the screen.
7.To rotate the image, press the Rotate button.
8.To modify the screen size and aspect ratio, press the Aspect button.
9.If changes are made to an image, the DPF card reader will prompt you to Save changes? before moving to the 
next image or operation. Press the Save Photo button on the remote to save the new image.
10.Press the Back button to return to the previous screen or...

Operating the Digital Picture Frame Card Reader (Select Models)
User’s Guide5–5 4.Press a navigation button to select an audio file.
a.The DPF card reader adds a check mark in front of the title.
b.Press OK to add to the slide show music list.
c.Press the Back button to de-select.
d.From bottom of list, use the Down Arrow button to scroll to next page. Other wise, the selection wraps around 
to the top of list.
e.Press OK button again.
5.The Navigation sub-menu appears at bottom of screen.
6.Press any of...

Operating the Digital Picture Frame Card Reader (Select Models)
5–6User’s Guide 3.Use the navigation buttons to move to the Settings icon and then press the OK button. Or press the Setup button 
on the remote.
4.The Settings Menu shows the current settings.
5.Press a navigation button to select an option you want to change:
❏Language
❏Display Image Size
❏Slideshow Transitions
❏Slideshow Speed
❏Slideshow Shuffle
❏Adjust LCD Color
❏Factory Default
Changing the Language Setting
1.Use the navigation buttons...

Operating the Digital Picture Frame Card Reader (Select Models)
User’s Guide5–7
Changing the Slideshow Transition
1.Use the navigation buttons to select the Slideshow Transition setting. When it is selected, it is highlighted 
in blue.
2.Press the Right Arrow button to scroll through the slideshow transition choices. The current choices are: 
❏Normal* (no transitional effect)
❏Random (randomly uses all transitions below)
❏Fade (new image supersedes old image)
❏Curtain (new image moves from left to right...

Operating the Digital Picture Frame Card Reader (Select Models)
5–8User’s Guide
Adjusting the LCD Settings for DPF
1.Use the navigation buttons to select Adjust LCD setting. When it is selected, it is highlighted in blue.
2.Press the Right Arrow button to view the LCD Setting choices. The current choices are: 
❏Brightness
❏Contrast
❏Tint
❏Color
3.Use the navigation buttons to select the LCD setting you want to change.
4.Use the navigation buttons to adjust the setting you selected. Moving to the left...

User’s Guide6–1
6
Preparing the Monitor for Shipping
Keep the original packing box in a storage area. You may need it later if you move or ship your monitor.
Removing the Cantilever Base
1.Disconnect the power, video, and audio cables from the monitor.
2.Set the monitor screen down on a flat, soft, protected surface.
3.Press the center tab in (1) and detach the base from the monitor (2).
Removing the cantilever base
WARNING: Before folding the monitor, turn off the monitor power, and disconnect all...

Preparing the Monitor for Shipping
6–2User’s Guide 4.Fold the monitor neck down, and place the monitor and base in the original packing box.
Folding the Double-Hinged Monitor
You don’t have to remove this monitor base for shipping. Fold the double-hinged monitor in its original shipping 
position.
1.Turn the monitor to a horizontal position with no tilt.
2.Lower the monitor all the way until the hinge is flat.
The monitor screen should still be vertical to the desktop so you can access the hinge....

Preparing the Monitor for Shipping
User’s Guide6–3 3.Place the shipping strap around the base, pull it tight, and connect it by sliding the strap ends through the slips.
4.Lower the monitor screen down flat, horizontal to the desktop.
5.Pivot the monitor to the portrait position (in the figure, you would be facing the monitor where the straight 
arrow is). (Perform this step only if you have the pivot feature.)
6.Place the folded monitor, screen-side up, in its original shipping box.
 

Preparing the Monitor for Shipping
6–4User’s Guide