HP Vp6320c Digital Projector Users Guide

							
Identifying common features 11
Projector buttons and lights
Identifying the projector buttons and lights
Item Function
1Power button Turns the projector on or off.
2Keystone adjustment Adjusts picture to eliminate slanted sides.
3Page-up and Page-down buttons Scroll up and down through pages on a connected computer.
4Source button Displays picture from the next input port.
5Picture mode button Selects the ne xt picture and color combination—
can be customized.
6Temperature warning light Warns if the projector is too hot.
7Lamp warning light Warns if the lamp is bad.
8Menu buttons Change settings  using the on-screen menu.
9Auto sync button Resynchronizes the projector to the input signal 
from a computer. 
						

							
Setting Up
12
Back panel
12Identifying back panel components
Item Function
1S-video input port Connects S-video source.
2Composite-video input port Connects composite-video source.
3Audio-in ports Connect stereo audio source using either RCA 
plugs or stereo mini-phone plug.
4USB port Connects to computer  and controls the mouse.
5VGA-in port Connects video input from computer or 
component-video source.
6VGA-out port Sends the VGA-in signal to a monitor.
7Main disconnect switch Disconnects power. Turn off when unplugging 
power cord.
CAUTION:Do not use this switch to turn off 
the projector. Use the power button on top of the 
projector. 
						

							
Identifying common features 13
812-Vdc trigger output Controls a motorized screen or similar accessory device.
NOTE:Available only on certain models.
9Power cord socket Connects power cord to projector.
:DVI input port Connects DVI-D digital video source.
NOTE:Available only on certain models.
;Lock slot Locks the projector to a stationary object with the use of a cable and lock.

						

							
Setting Up
14
Remote control
TIP: Before using the remote control, remove the battery protector by pulling the plastic tab 
until it comes out of the remote control.
Identifying components of the remote control
Item Function
1Hide button Blanks picture, mutes speaker.
2Mouse pad Moves the mouse pointer on a connected 
computer.
3Power button Turns the projector on or off.
4Left-click and right-click mouse buttons Perform left-click and right-click mouse functions on a connected computer.
5Page-up and Page-down buttons Scroll up and down through pages on a 
connected computer. 
						

							
Identifying common features 15
Accessories
Get more from your presentations with HP projector accessories. You can purchase accessories 
at http://www.hp.com or through your projector dealer.
HP ceiling mount kit —enables you to simply and discreetly install your projector on the 
ceiling.
 HP projection screens —mobile screens that are easy to carry and set up anywhere, and 
fixed screens for even greater convenience.
 HP premium remote control —allows you to control every aspect of your presentations.
 HP power cables —allow you to connect in any region.
 HP cables —allow you to connect all audio-video equipment.
 HP replacement lamp —brings your projector up to factory-fresh brightness.
6Auto sync button Resynchronizes the projector to the input signal 
from a computer.
7Picture mode button Selects the ne xt picture and color combination—
can be customized.
8Menu buttons Change settings  using the on-screen menu.
9Source button Displays picture from the next input port.
Identifying components of the remote control (continued)
Item Function 
						

							
Setting Up
16
Setting up the projector
Positioning the projector
The following tables show you where to position the projector in relation to the screen.
TIP: For best picture quality, place the projector 1.5 to 5 m (5 to 16 ft) from the screen 
						

							
Setting up the projector 17
Image size relative to distance from the screen—vp6310 series
Image size (diagonal) Image size (width) Distance (lens to screen)
(inches) (meters) (inches) (meters) (inches) (meters)
30 0.8 24 0.6 41 to 48 1.1 to 1.2
40 1.0 32 0.8 55 to 64 1.4 to 1.6
60 1.5 48 1.2 83 to 96 2.1 to 2.4
80 2.0 64 1.6 110 to 128 2.8 to 3.3
100 2.5 80 2.0 138 to 160 3.5 to 4.1
120 3.0 96 2.4 166 to 192 4.2 to 4.9
150 3.8 120 3.0 207 to 240 5.3 to 6.1
180 4.6 144 3.7 248 to 288 6.3 to 7.3
200 5.1 160 4.1 276 to 320 7.0 to 8.1
240 6.1 192 4.9 331 to 384 8.4 to 9.8
270 6.9 216 5.5 372 to 396 9.5 to 10.0 
						

							
Setting Up
18
If you do not want to use the distance table,  you can use the following equations to help 
determine where to install the projector relative to the screen. Image size relative to distance from the screen—vp6320 series
Image size (diagonal) Image size  (width) Distance (lens to screen)
(inches) (meters) (inches) (meters) (inches) (meters)
30 0.8 24 0.6 43 to 50 1.1 to 1.3
40 1.0 32 0.8 58 to 67 1.5 to 1.7
60 1.5 48 1.2 87 to 101 2.2 to 2.6
80 2.0 64 1.6 116 to 134 2.9 to 3.4
100 2.5 80 2.0 145 to 168 3.7 to 4.3
120 3.0 96 2.4 174 to 202 4.4 to 5.1
150 3.8 120 3.0 217 to 252 5.5 to 6.4
180 4.6 144 3.7 261 to 302 6.6 to 7.7
200 5.1 160 4.1 290 to 336 7.4 to 8.5
240 6.1 192 4.9 348 to 400 8.8 to 10.0
270 6.9 216 5.5 391 to 400 9.9 to 10.0
Calculating projection distances
distance from lens to screen = A × width of screen
minimum and maximum distance from screen = B
width of screen = 0.8 × diagonal of screen (for 3:4 screen)
projector lens below bottom of screen = C × width of screen (for 4:3 screen)
vp6310 series
A = 1.7 to 2.0
B = 1 to 10 m (3 to 33 ft)
C = 0.11 to 0.41 vp6320 series
A = 1.8 to 2.1
B = 1 to 10 m (3 to 33 ft)
C = 0.11 to 0.43 
						

							
Setting up the projector 19
Connecting power
1.Place the projector on a stable platform located 1 to 10 m (3 to 33 ft) in front of the screen. 
Ideally, the platform should be lower than the bottom of the screen.
2. Connect one end of the power cord to the back of the projector 
1 and the other end to a 
grounded electrical outlet 
2.
3. Turn on the main disconnect switch 
3 on the back of the projector.
If you want to permanently install the projector on the ceiling or behind the screen, see 
“Installing the projector” on page 49. 
						

							
Setting Up
20
Connecting a computer 
Requires:
 VGA cable 
1
USB cable 2 (optional)
 Audio cable, mini-phone 
3 (optional)
The optional USB connection allows you to use the mouse and page up/down features on the 
remote control.
See “Showing a computer screen” on page 31.
TIP: If the computer display does not appear on  the projector, you might have to press a 
combination of keys on the computer to turn  on the computer’s VGA output. For example, on 
some computers you must press F
N+F4 or FN+F5. For instructions, refer to the user 
documentation provided with your computer.
TIP: You can connect an external computer monitor to the VGA-out port on the projector. The 
monitor displays the signal connected to the VGA-in port—even if the projector is turned off or 
showing a different input.