HP Vp6320c Digital Projector Users Guide

Showing a computer screen 31
2 Showing Presentations
Showing a computer screen
1.Be sure the computer is connected to the projector and turned on. See “Connecting a 
computer” on page 20.
2. Be sure the projector is set up, turned on, and adjusted. See “Making basic adjustments” 
on page 28.
3. If a different input source is shown on the projector, press the  source button on the projector 
or remote control one or more ti mes to select the VGA-in port.
4. If the computer display is not shown on the...

Showing Presentations
32 

Adjusting the picture and sound 33
3 Adjusting the Projector
Adjusting the picture and sound
Choosing the best picture mode
You can quickly choose a different picture mode to make adjustments to the picture. Picture 
modes can control properties such as color and size. They let you easily choose the best 
settings for ambient lighting and the type of video content (see “Adjusting the picture and 
sound” on page 33).
S Press the picture mode   button one or more times to select the picture mode that...

Adjusting the Projector
34
You can also customize the picture modes so they are best for your video sources:
1. Press the picture mode   button to select the picture mode you want to adjust.
2. Press  enter and go to  Picture > Customize picture mode.
3. Adjust the settings until you are satisfied with the picture.
TIP: To exit from any on-screen menu or adjustment, press the exit   button.
Adjusting the shape of the picture
Depending on the type of video source you are viewing, the picture might or...

Adjusting the picture and sound 35
Adjusting a slanted picture
If the projector is tilted up or down, the sides of the picture on the screen might slant in or out, 
even though the top and bottom are level. The keystone adjustment corrects this problem.
S Press the  keystone adjustment on the projector until the picture looks correct.
You can also make the keystone adjustment in the on-screen menu. Press  enter, and go to 
Setup > Keystone  to adjust the picture. 
TIP:If the top and bottom of the...

Adjusting the Projector
36
Adjusting the picture for best color
You can fine tune the picture settings on your proj ector to get the best color and image quality. 
You should perform these steps for each input sour ce device and each input port that you use. 
Do them in the order shown. For some input port s, some of these settings may not be available.
1. Press the picture mode   button and select the picture mode you want to use for the current 
source.
2. Press  enter and go to the  Picture menu.
3....

Adjusting the picture and sound 37
Adjusting the volume
You can control the volume of the projector’s speakers:
To change the volume of the projector’s speakers, press  enter, go to  Sound > Volume,  and 
change the setting.
 To turn the sound on or off temporarily, press  enter, go to  Sound > Mute,  and mute the 
sound.
Adjusting other sound settings
1. Press  enter,  and go to  Sound.
2. Set the sound adjustments.
From the  Sound menu, you can adjust sound settings, such as mute, volume, and...

Adjusting the Projector
38
4. When prompted, confirm the new sequence and press  enter.
NOTE:If you set an unlock sequence, you must press the sequence every time you turn on the 
projector. The sequence protects the projector only when the projector is turning on, not at any 
other time.
If you forget the unlock sequence, you must call HP support to unlock the projector. You must 
have the projector and your proof of purchase.
Using the on-screen menu
Changing settings using the on-screen menu
You can...

Using the on-screen menu 39
Input menu
For a visual aid, see “Back panel” on page 12.
Input menu
VGA Shows the source connected to the VGA-in port.
S-video Show the source connected to the S-video port.
Composite Shows the source connected to the composite-video port.
DVI Shows the source connected to the DVI port (available only on certain models).
Scan inputs Sets whether the projector automatically searches for input signals and  displays the next one found.
Widescreen input Sets whether a widescreen...

Adjusting the Projector
40
Picture menu
Some picture adjustments are available only when certain input ports are in use. Unavailable 
adjustments are shown in gray in the on-screen menu.
Picture menu
Color settings... Adjusts the picture and colors.
Brightness Brightens or darkens the picture.
Contrast Sets the difference between light and dark areas.
Sharpness Sharpens or softens the picture.
Color saturation Adjusts the intensity of colors.
Tint Shifts colors toward red or green.
Color space For...