HP V220 User Guide

11 
 
Using the Monitor 
 
Operating Instructions 
Control buttons are located on the front of the panel, as shown below. Use the Menu button ( C) to adjust the 
display settings to your  personal preferences: 
 Set up the monitor, attach the cables, an d adjust the tilt as described in the Setup section above. 
 Press the Power button ( F) to turn the monitor on and off. The power  indicator lights up when the monitor is on. 
 The monitor must be turned on for the other control buttons to work. 
 Set...

12 
External Controls 
 
 
A – (minus) button  Navigates backward through th e OSD menu and decreases adjustment levels.
If the OSD menu is inactive,  activates the Volume decrease. 
B  + (plus) button  Navigates forward through the  OSD menu and increases adjustment levels. 
If the OSD menu is inactive,  activates the Volume increase. 
C  Menu button  Opens, selects, or exits the OSD menu. 
D  Mute button  Turns sound on or off. 
E  Auto button  Automatically fine -tunes the image quality. 
F  Power...

13 
 
Settings 
 
Setting the Optimal Resolution 
The recommended resolution for this monitor is 1680 x 1050. To configure the monitor to this resolution, 
complete the setup procedure and make sure that the moni tor is connected to the computer. Turn the monitor on 
and do the following: 
1  Click the  Windows Start Button
®, and then click  Control Panel . 
2  Under  Appearance and Personalization , click Adjust Screen Resolution . 
3  Set the resolution  slide bar to 1680 x 1050. 
 
 
NOTE: If 1680 x...

14 
Adjusting On-Screen Display Settings 
Use the OSD menu to adjust the screen image and change settings. To access the OSD menu: 
1  If the monitor is not already on, press th e Power button to turn the monitor on. 
2  Press the Menu button to activate the OSD menu. 
3  Press the – (minus) and + (plus) buttons to navigate  through the functions. Once the desired function is 
highlighted, press the Menu button agai n to activate it. If the selected function has a sub-menu, it displays. 
Press – (minus)...

15 
OSD Menu 
The table below shows the OSD menus and their functions at each level. 
  OSD Menu Levels 
Level 1  Level 2  Level 3  Factory Preset 
Brightness Adjustment Scale Y 
 Reset   
 Cancel   
  Save and Return  
Contrast Adjustment Scale Y 
 Reset   
 Cancel   
  Save and Return  
Volume Adjustment Scale Y 
Image Control  Auto Adjustment “Adjusting” Message Y 
  Horizontal Position Adjustment Scale Y 
  Vertical Position Adjustment Scale Y 
 Custom Scaling  Fill to Screen 
Fill to Aspect Ratio...

16 
  OSD Menu Levels (continued ) 
Level 1  Level 2  Level 3  Factory Preset 
Language Deutsch 
 Simplified Chinese
 Japanese 
 English  English 
 Español 
 Français 
 Italiano 
 Nederlands 
 Cancel 
  Save and Return
Management  Power Saver  On / Off Selection Y
  Power On Recall On / Off Selection Y
  Mode Display  On / Off Selection Y
 Power-On Status Displa y Top/Middle/Bottom Middle 
  DDC/CI Support On / Off Selection Y
  Sleep Timer  Timer Set Menu Y
 Cancel 
  Save and Return
OSD Control...

17 
 
Installing Drivers and Using the Auto-Adjustment Feature 
 
Downloading Drivers and Software 
To download the latest version of drivers and  software files from the HP Support Web site: 
1  Refer to: 
http://www.hp.com/support 
2  Select your country/region. 
3  Select  Download Drivers and Software . 
4  Enter the model number of your monitor. The software  download pages for your monitor will be displayed. 
5  Download and install the driver and software files  using the instructions in the...

18 
 
Technical Support FAQs 
 
 
Technical Support FAQs (Frequently Asked Questions) 
Problem & Question Possible Solutions  
Power LED is not on.  Make sure the Power button is on  and the power cord is properly 
connected to a grounded power  outlet and to the monitor. 
No Plug & Play.  In order for the Plug & Play feature of the monitor to work, you 
need a Plug & Play compatible computer and video card. Check 
with your computer manufacturer. 
 Check the monitor’s video cable an d make sure none of...

19 
 
Technical Support FAQs (Frequently Asked Questions) (continued ) 
Problem & Question  Possible Solutions  
Missing one of the primary colors (red, 
green, or blue).  Inspect the monitor’s video cable an d make sure that none of the 
pins are bent. 
  Make sure the monitor’s video cabl e is properly connected to the 
computer. 
Screen image is not centered or sized 
properly.   Adjust horizontal and ve rtical screen position. 
 For VGA input, the auto-adjustment  function may fix this problem....

20 
 
Specifications 
 
All specifications represent the typical specifications provided by HP’s  component manufacturers; actual 
performance may vary either higher or lower. 
 
v220 
Display Type  22 inches, TFT LCD  55.88 cm 
Viewable Image Size  22-inch diagonal  55.88 cm 
Tilt  –5° to 20°   
Face Treatment  Antiglare po larizer with hard coating 
(select models only)   
Maximum Weight (unpacked)  14.551 lb.  6.6 kg 
Dimensions (including pedestal) 
  Height 
  Depth 
  Width  
17.20 inches 
9.84...