HP Tft7210r User Guide

  
Maintenance 21 
   
Storing the HP TFT7210R 
1.  Pull the release mechanism toward you with your index fingers to unlock the inner slides. 
2. In the same motion, release the release mechanism and move the HP TFT7210R forward into the  
stored position.   
  WARNING:   To reduce the risk of personal injury, release the release mechanisms after  
pushing the HP TFT7210R slightly forward.   
  
Moving a rack with the HP TFT7210R installed 
When moving the HP TFT7210R installed in a ra ck, HP recommends...

  
Maintenance 22  
7.  Repeat step 6 for the other lock plate. 
 
 

  
Specifications 23 
Specifications 
Physical Specifications    
Parameter Specification 
Monitor height  34.29  cm (13.5 in) 
Monitor depth  4.25 cm (1.67 in) 
Monitor width  39.6 cm (15.59 in) 
Unit weight  6.12 kg (13.5 lb)   
Environmental Specifications   
Feature Specification 
Operating temperature  
(independent of altitude)  
5 to 35°C (41 to 95°F) 
Nonoperating temperature  
(independent of altitude)  
-20 to 60°C (-4 to 140°F) 
Relative humidity  20 to 80%; noncondensing 
Operating altitude...

  
Removing the rails  24 
Removing the rails 
Removing the HP 1U Adjustable Toolless Rails 
1.  Remove the HP TFT7210R. 
2. Remove the brace rail assembly. 
3. Locate the spring release. 
4. Place your hand on the outside of the HP 1U Adjustable Toolless Rail so that you can move the  
spring release. 
5.  Gently move the spring release toward the inside of the rack (1) while moving the HP 1U Adjustable  
Toolless Rail out toward you and away from the rack (2).   
  NOTE:  If you cannot gain access to...

  
Technical support  25 
Technical support 
HP contact information 
For the name of the nearest  HP authorized reseller:  
• In the United States, see the HP US service locator webpage (http://www.hp.com/service_locator). 
• In other locations, see the Contact HP worldwide (in English) webpage  
( http://welcome.hp.com/country/us/en/wwcontact.html).  
For HP technical support: 
•  In the United States, for contact options see the Contact HP United States webpage  
(...

  
Regulatory compliance notices  26 
Regulatory compliance notices 
Regulatory compliance identification numbers 
For the purpose of regulatory compliance certifications  and identification, this product has been assigned  
a unique regulatory model number. The regulatory mo del number can be found on the product nameplate  
label, along with all required approval markings  and information. When requesting compliance  
information for this product, always refer to this re gulatory model number. The...

  
Regulatory compliance notices  27 
energy and, if not installed and used in accordance  with the instructions, may cause harmful interference  
to radio communications. However, th ere is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful inte rference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more  of the following...

  
Regulatory compliance notices  28 
Canadian notice (Avis Canadien) 
Class A equipment   
This Class A digital apparatus meets all requirements  of the Canadian Interference-Causing Equipment  
Regulations.  
Cet appareil numérique de la classe A respecte tout es les exigences du Règlement sur le matériel  
brouilleur du Canada.  
Class B equipment   
This Class B digital apparatus meets all requirements  of the Canadian Interference-Causing Equipment  
Regulations.  
Cet appareil numérique de la...

  
Regulatory compliance notices  29 
Japanese notice 
  
BSMI notice 
  
Korean notice 
Class A equipment  
  
Class B equipment  
  
 

  
Regulatory compliance notices  30 
Disposal of waste equipment by users in private  
households in the European Union  
 
This symbol on the product or on its packaging indica tes that this product must not be disposed of with  
your other household waste. Instead, it is your re sponsibility to dispose of your waste equipment by  
handing it over to a designated collection point fo r the recycling of waste electrical and electronic  
equipment. The separate collection and recycling of yo ur waste...