HP Sw350 User Manual
Have a look at the manual HP Sw350 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
47 Using Blink Detection Mode - The Blink Detection mode tracks faces and determines if the captured image contains subjects with closed eyes. A menu selection will appear prompting save the image or not. This mode saves time in managing photos to be stored or deleted from memory. Select 1. from the Scene Mode submenu. 307307 12 M Face tracking is utomatically enabled. Detected faces are framed. Press the shutter button half-way down to focus the subject. The frame turns green to 2. indicate focus is set. Press the shutter button to capture the image. The image is automatically saved unless 3. the camera detects that the subject blinked: Save image Cancel Select 4. Save Image to save or Cancel to disregard.
48 Using Aperture Priority Mode - Aperture Priority mode, allow users can adjust the aperture value. The camera automatically sets the shutter speed to match the brightness of the scene. To manually change the aperture value, press the button, then use the and to manually adjust the value. When finished, press the button to confirm setting. 307307 12 F 3. 0F 3.0 A : AdjustSET M Displays the aperture value Using Shutter Priority Mode - Shutter Priority mode, allow users adjust the shutter speed. The camera automatically sets the aperture value to match the brightness of the scene. To manually change the shutter speed, press the button, then use the and to manually adjust the speed. When finished, press the button to confirm setting. Displays the shutter speed value 307307 1/ 301/ 30 12S : AdjustSET M
49 Using Manual Exposure Mode - With Manual Exposure mode, users can manually adjust the shutter speed and the aperture value. To activate Manual Exposure Select 1. from the Scene Mode submenu. Press 2. button to enter the adjust mode. Use the 3. or keys to select the shutter speed options or Use the or keys to select the aperture value options. Use the 4. or keys to increase or decrease the aperture or shutter speed values. Press the 5. to exit the adjustment mode. Press the shutter button to capture the image. 6. 307307 F 3. 0F 3.0 1/ 301/ 30 12 : AdjustSET M Displays the aperture and shutter speed value NotePressing the shutter button half-way will also display, the difference between the correct and • selected exposure is (in red text).
50 Setting the Self-Timer/Burst This camera features a Self-Timer and Burst which can be set in the Self-Timer/Burst function in the Shooting Menu. The Self-Timer allows you to take photos after a pre-defined delay. While burst lets you take consecutive shots. This feature is only available in Shooting mode. The Self-Timer/Burst setting is reset to off when the camera is powered off. Shooting Mode Self-Timer/burst AEB AF Area OFF OFF AF Lamp Sharpness 10 secs. 2 secs. 2 shots Burst Off10 2 x2 OFF OFF Shooting Mode AEB AF A rea AF Lamp Sharpness Self-Timer/BurstOFF Icon Item Description 1010 Secs. Self-TimerSets a 10 seconds delay to capture image after pressing the shutter button. 22 Secs. Self-TimerSets a 2 seconds delay to capture image after pressing the shutter button. x22 Shots Self-TimerPerforms delay and capture twice: • Performs a 10-second delay, and then captures the image. • Performs another 2 seconds delay and then captures the image again. Burst Performs continuous shooting when the shutter button is pressed. Stops shooting when the shutter button is released. Off Captures an image without time delay.
51 Setting the AEB Enabling AEB (Auto Exposure Bracketing) will capture a photo with three different exposure settings. The the initial photo is taken at the pre-determined EV setting, followed by the next photo • captured at -0.3EV. The final photo is then captured at +0.3EV. The AEB setting is reset to off when the camera is switched out of Photo Record mode or • is powered off. Shooting Mode Self-Timer/Burst AEB AF Area OFF OFF Sharpness AF Lamp On Off OFF ON Shooting Mode Self-Timer/Burst AEB AF Area OFF OFF Sharpness AF Lamp Setting the AF Area This camera has 2 AF (Automatic Focus) settings. Each setting changes the focus behavior of the camera. Shooting Mode Self-Timer/Burst AEB AF Area OFF OFF AF Lamp Sharpness Multi Spot Shooting Mode Self-Timer/Burst AEB AF Area OFF OFF AF Lamp Sharpness
52 The table below shows the available AF area settings. IconItem Description MultiThe camera automatically selects focus area within the wide frame. SpotThe focus area is fixed on the center spot. Setting the AF Lamp The AF Lamp function allows the camera to better focus; even in low light conditions. If AF Lamp is set to Auto, the AF lamp located in the front of the camera, emits an red light by pressing the shutter button half-way down allowing the camera to focus easily. Shooting Mode Self-Timer/Burst AEB AF Area OFF OFF AF Lamp Sharpness Auto Off OFF Shooting Mode Self-Timer/Burst AEB AF Area OFF OFF AF Lamp Sharpness
53 Setting Sharpness These settings will enhance or soften details of the photo. Shooting Mode Self-Timer/Burst AEB AF Area AF Lamp OFF OFF Sharpness High Medium Low Shooting Mode Self-Timer/Burst AEB AF Area AF Lamp OFF OFF Sharpness The table below shows the available Sharpness settings. Icon Item Description HighSharpens the image. MediumMedium sharpness. LowSoftens the image.
54 Setting Saturation The Saturation setting will allow adjustment to the color saturation of the photo. Using a higher saturation setting for rich colors and a lower setting for muted tones. Saturation Contrast Digital Zoom Date & Time Imprint Instant Review OFF OFFHigh Medium Low Saturation Contrast Digital Zoo m Date & Time Imprint Instant Review OFF OFF The table below shows the available Saturation settings. Icon Item Description HighEnhances saturation. MediumMedium saturation is applied. LowReduces saturation.
55 Setting Contrast These settings allow for adjustment to the contrast of a photo. Saturation Contrast Digital Zoom Date & Time Imprint Instant Review OFF OFF Saturation Digital Zoo m Date & Time Imprint Instant Review OFF OFF ContrastHigh Medium Low Setting the Digital Zoom This feature controls the digital zoom mode of your camera. This camera uses Optical Zoom before Digital Zoom. When the optical zoom reaches 5X, the camera will utilize digital zooming if enabled. Digital Zoom is set to Off by default. Saturation Contrast Digital Zoom Date & Time Imprint Instant Review OFF Intelligent Zoom Standard Zoom Off OFF Saturation Contrast Digital Zoo m Date & Time Imprint Instant Review OFF OFF
56 The table below shows the available Digital Zoom settings. IconItem Description Intelligent ZoomEnlarges the image digitally with almost no distortion. This feature is available for still images only. Standard ZoomEnlarges all image sizes up to a maximum of 5x, but the image quality deteriorates. Off Uses the optical zoom only. NoteDigital Zoom is not available in Smile Capture, Video, Intelligent Sence, Portait, Night Portait, • Blink Detection, Love Portait modes and Voice Recording modes. The maximum Intelligent zoom scale varies depending on the image type and • resolution.