HP Sb21 Digital Projector Owners Manual

21
On Screen Display Menus
The projector has multilingual On Screen Display (OSD) menus that allow you
to make image adjustments by changing a variety of settings.
How to operate
 Press the “Menu” button on the Remote Control or Control Panel to open
the OSD.
Press the 
  buttons to display the contents of the desired menu tab.
The selected tab’s title will change from dark blue to white.
Press the 
  buttons to select the desired menu item. When an item is
selected, the color of the item will change...

22
“Language” Menu
To open the “Language” menu:
1.  Press the “Menu” button to open the On Screen Display (OSD) menus.
2. Use the 
 or  buttons to open the “Language” menu tab.
3. Press the 
  buttons to select the desired language.
4. Press the “Menu” button to finalize the selection.
user
controls
xb31 sb21
NOTE:The hp sb21’s OSD
does not include an
Audio menu. 

23
“All Images” Menu
To open the “All Images” menu:
1. Press the “Menu” button to open the On Screen Display (OSD) menus.
2. Use the 
 or  buttons to open the “All Images” menu tab.
3. Press the 
  buttons to select one of the following items:
Brightness
Press the 
 button to darken the image.
Press the 
 button to lighten the image.
Contrast
The contrast controls the degree of difference between the lightest and
darkest parts of the picture.
Press the 
 button to decrease the contrast.
Press the...

24
“Audio” Menu
To open the “Audio” menu:
1. Press the “Menu” button to open the On Screen Display (OSD) menus.
2. Use the 
 or  buttons to open the “Audio” menu tab.
3. Press the 
  buttons to select one of the following items:
Volume
Press the 
 button to decrease the volume.
Press the 
 button to increase the volume.
Treble
The treble setting controls the higher frequencies of your audio source.
Press the 
 button to decrease the treble.
Press the 
 button to increase the treble.
Bass
The Bass...

25
“Computer Image” Menu
To open the “Computer Image” menu:
1. Press the “Menu” button to open the On Screen Display (OSD) menus.
2. Use the 
 or  buttons to open the “Computer Image” menu tab.
3. Press the 
  buttons to select one of the following items:
Auto Image
The projector automatically adjusts frequency, tracking, horizontal and
vertical position. With most signal sources, Auto Image provides the best
results.
Frequency
“Frequency” is the display data frequency. This should match the frequency
of...

26
“Management” Menu
To open the “Management” menu:
1. Press the “Menu” button to open the On Screen Display (OSD) menus.
2. Use the 
 or  buttons to open the “Management” menu tab.
3. Press the 
  buttons to select one of the following items:
Menu Location
Choose the Menu location on the display screen.
Projection Direction

  Front-Desktop: The image used in standard desktop operation.

  Rear-Desktop: The image is reversed for projection from behind
a translucent screen.

  Front-Ceiling: The image...

27
“Video Image” Menu
To open the “Video Image” menu:
1. Press the “Menu” button to open the On Screen Display (OSD) menus.
2. Use the 
 or  buttons to open the “Video Image” menu tab.
3. Press the 
  buttons to select one of the following items:
Color Saturation
The color setting adjusts a video image from black and white to fully
saturated color.
Press the 
 button to decrease the amount of color in the image.
Press the 
 button to increase the amount of color in the image.
Sharpness
Adjusting the...

28
Remote control
Power ON/OFF Button
 Refer to ”Turning the Projector ON and OFF” on pages 14 and 15.
“Hide” Button
 Press the “Hide” button to project a black screen. Press the “Hide” button
again to view the image.
Multi-Directional Selector Controller *
 This feature can be used as a mouse to control direction.
Right Mouse Button *
Page Up (up) and Page Down (dn) Buttons *
 Press the “up” or “dn” buttons to page up or page down, respectively.
Laser Pointer Button
 Press and hold the “Laser...

29
xb31 sb21
Multi-Directional Selector
Right Mouse Button
Hide Image
Page Down
Keystone Correction
Zoom In / Zoom Out
Menu Transmit
Indicator Light
Projector Power
Page Up
Laser Pointer
Source
Freeze
Left Mouse Button
CAUTION!
PREVENT EYE INJURY.
Do not point the remote
control’s laserlight at
anyone’s eyes.
NOTE: Connect the USB
cable when using
the remote control
mouse features.
user
controls
Volume ( + / - ) 

30
Troubleshooting
Consult this section if you are experiencing trouble with your projector. If the
problem persists, please contact hp. Refer to Warranty and Support Information
on page 39.
Problem: No image is projected on screen.
 Verify that the projector’s power cord is plugged in and properly
connected.
 Verify that all cables are properly installed and securely connected.
 Make sure you have removed the lens cap and that the blue Power
Indicator Light is ON.
 Verify that the Lamp Indicator...