HP S1933 User Guide

15 Appendix 4.   Operating the Monitor ENWW
 
Main
Menu Item Main
Menu Icon Sub
Menu Item Description Adjust 
Range Reset Value
OSD Setup H. Position Adjust the horizontal position 
of the OSD.
Each  step will increase/
decrease value by 5 0-100 Recall 50 Value
V. Position Adjust the vertical position of  the OSD.
Each  step will increase/
decrease value by 5 0-100 Recall 50 Value
Timeout Adjust the OSD timeout. Each  step will increase/
decrease value by 5 5-100 Recall 10 Value
Language Set OSD display...

ENWWUsing the On-Screen Display (OSD) 16
 
Main
Menu Item Main
Menu Icon Sub
Menu Item Description Adjust 
Range Reset Value
Extra Input Select  (Available 
on Select 
Models)Select video input signal. D-SUB Note: Analog-
Only Model no 
Input Select 
item.
DVI 
DDC/CI Select DDC/CI on or off On Off
Reset Clear each old status of Auto- configuration and set the color 
temperature to Warm. Ye s N / A
Do not execute reset, return 
to main menu. No
Information Show the resolution, H/V  frequency and input...

17 Appendix 4.   Operating the Monitor ENWW
 
Selecting Video Input Connectors
The input connectors are:
• VGA connector (analog)
• DVI-D connector (digital) (Select Models)
The monitor automatically determines which inputs have valid video signals, and 
displays the image.
You can connect the VGA cable, the DVI-D cable, or both. If both cables are installed, 
the default input selection is DVI.The source  of input can be switched using the Input 
Select option in the OSD menu.
Identifying Monitor...

ENWWPower-Saver Feature 18
 
Power-Saver Feature
When the monitor is in normal operating mode, the Power light is blue and the monitor 
uses the normal watts of power. For power usage, refer to Technical Specification 
(Appendix B). The monitor also supports a po wer-saver mode that is controlled by the 
computer. When the monitor is in the redu ced-power state, the monitor screen is 
blank, the backlight is off, and the Power light is amber. The monitor uses minimum 
power. When the monitor is awakened,...

19 Appendix A.   TroubleshootingENWW 
 
A. Troubleshooting
Solving Common Problems
The following table lists possible problems, the possible cause of each problem, and 
the recommended solutions:
Problem Solution  
Problem & Question Possible Solutions
Power LED Is Not ON• Make sure the power button is ON and the Power Cord is  properly connected to a grounded power outlet and to the 
monitor. 
No Plug & Play• In order for the Plug & Play feature of the monitor to work,  you need a Plug & Play compatible...

ENWW 20
 
Getting Support from hp.com
Before you contact customer service, refer to HP Technical Support at:      
http://www.hp.com/support
Select your country/region,  and then follow the links to the supp ort page for your 
monitor.
Preparing to Call Technical Support
If you cannot solve a problem by using the  troubleshooting tips in this section, you 
might have to call technical support. For technical support contact information, refer to 
the printed documentation included with the monitor.
Have...

ENWW 21
B. Technical Specifications
All specifications represent the typical specifications provided by HPs component  
manufacturers; actual performance  may vary either higher or lower.
HP LCD Monitors
Face treatment: Glare polarizer with hard coating
Input terminal:
       VGA connector
DVI-D 24-pin D-type connector  (select models)
 
Table B-1 Model S1922/S1922a
Specifications:
Display Type: TFT LCD active matrix
Viewable Image Size 47 cm (18.5 in.) diagonal
Tilt -4  (+/-2)~+18 (+/-2)
Maximum...

22 Appendix B.   Technical SpecificationsENWW 
 
   
Table B-2 Model  S1933
Specifications:
Display Type: TFT LCD active matrix
Viewable Image Size 47 cm (18.5 in.) diagonal
Tilt -4 (+/-2)~+18 (+/-2)
Maximum Weight (unpacked) 3.2 kg(7.04 lbs)
Dimensions (h x w x d) 340.95 mm x 440.3 mm x 180 mm
13.5 x 17.4 x 7 in
Maximum Graphics Resolution 1366 x 768 @ 60 Hz
Optimum Graphics Resolution 1366 x 768 @ 60 Hz analog mode
Text Mode 720 x 400
Dot Pitch 0.3 x 0.3 mm/0.01 x 0.01 in
Horizontal Frequency (analog...

ENWW 23
 
   
Table B-3 Model  S2022a/S2022cp
Specifications:
Display Type: TFT LCD active matrix
Viewable Image Size 50.8 cm (20 in.) diagonal
Tilt -4 (+/-2)~+18 (+/-2)
Maximum Weight (unpacked) 3.4 kg(7.48 lbs)
Dimensions (h x w x d) 355.7 mm x 472.8 mm x 180 mm
14 x 18.6 x 7 in
Maximum Graphics Resolution 1600 x 900 @ 60 Hz
Optimum Graphics Resolution 1600 x 900 @ 60 Hz analog mode
Text Mode 720 x 400
Dot Pitch 0.2768 x 0.2768 mm/0.01 x 0.01 in
Horizontal Frequency (analog mode) 30 to 83 kHz...

24 Appendix B.   Technical SpecificationsENWW 
 
Preset Video Modes
The monitor automatically recognizes many preset vi deo input modes that will appear 
properly sized and centered on the screen.
   
    Table B-4 Factory Preset Video Input Modes, S1922/S1922a/S1933
Item Preset Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz)
1 640 x 480 31.47 59.94
2 720 x 400 31.47 70.09
3 800 x 600 37.88 60.32
4 1024 x 768 48.36 60.00
5 1280 x720 45.00 60.00
6 1280 x 960 60.00 60.00
7 1280 x 1024 63.98...