HP Pw460t User Manual

6667
Setting Power Save
The Power Save function allows you to set an idle time after 
which the camera automatically sets to sleep mode to save 
power.  After a minute of being in sleep mode, the camera 
eventually turns off power. 
This function is not available in the following instances:Recording	a	video	or	audio	file
•	
Playing	a	slideshow/video/audio	file
•	
Using the USB connector
•	
Setting LCD Save
Enable the LCD Save function to automatically decrease the LCD 
brightness to conserve battery...

6869
Setting TV Out
Use the TV Out function to adjust video output signal to accommodate different regional settings. If TV out is not set 
correctly, the image may not display properly on TV.Available settings are:
NTSC.
•   Applicable in Japan, USA, Canada, Taiwan and others.
PAL.
•   Applicable in Europe, Asia (excluding Taiwan), Oceania 
and others.
Setting LCD Brightness
Select a brightness level for the LCD monitor.
Available settings are:
Bright
•	
Normal
•	 

6869
Setting Memory Kit
 This utility formats the internal memory (or memory card) and erases all stored images and data.  If the images 
were saved in the internal memory, when inserting memory card into the camera, you can use Copy to Card function 
in order to copy all images from the internal memory into memory card.
Available settings are:
Format.
•   Tap to format currently used memory.
Copy to Card.
•  	Tap	to	copy	all	files	stored	in	the	internal	
memory to the memory card.
If the photos were...

7071
Making Connections
You can connect your camera to: TV, computer, or a printer.
Connecting the Camera to a TV
You can play back your images on a TV screen. Before connecting to any video devices, make sure to select NTSC/
PAL to match the broadcast standard of the video equipment you are going to connect to the camera.
To connect your camera to a TV:
Turn on the camera.
1. 
Set the TV out to match the TV’s video out format. See 
2. 
“Setting TV Out” on page 68.
Connect the USB/AV 3-in-1 cable (not...

7071
The PC starts to detect the connection while the LCD monitor 
5. 
appears “Connecting… ” 
Connection established after “
6.  PC MODE” appeared on the 
LCD monitor
Access the files in the camera by your PC.
7. 
The camera’s internal memory and memory card would display as removable 
•	
drives in PC. 
After the connection, no image is displayed on the LCD monitor.
•	
Connecting the Camera to a Printer 
You can print your photos directly using a  PictBridge compatible printer.
Turn on your Printer....

7273
Setting the Print Mode Menu
Print Mode menu appears on the screen after the connection between a printer and your camera is established. Print Mode includes three major settings:
Select.
•   An image can then be selected to print.
All.
•   Prints all images.
Index.
•   Prints all images as thumbnails.
To set Print Select
Tap the 
1.  or  button to scroll and select an image for 
printing. 
Specify the number of copies. Tap 
2. 
 or  to increase/
decrease the number.
Tap the 
3. 
 button to set date...

7273
Appendix
About Folder and File Names
Your camera automatically creates specific directory of folder in the internal memory cards to organize captured 
images, videos and audio files.
File Naming
File names begin with “HPIM” and followed by a 4-digit number that increases in sequence.  File numbering starts 
from 0001 when a new folder is created.
If the highest folder number is 999 and the highest file number exceeds 9999, the camera will display the warning 
message “Folder cannot be created.”...

7475
Troubleshooting
ProblemCause and/or Action
Camera does not turn on. The battery may be exhausted. Charge or replace the battery.
Camera turns off automatically. Press any button except the Power button to power on the camera.
LCD turns blank. Press any button except the Power button to turn on the LCD.
Empty battery icon is displayed on 
the LCD, and then the camera turns 
off. One or both of the battery may be exhausted. Charge or replace the battery.
LCD screen displays ‘No images in 
memory’. The...

7475
Getting Help
Should you have a technical support question or your HP Digital Camera require service within the warranty 
period, please contact the original point of purchase or an authorized HP reseller in your country. If service 
is not available at those locations, please contact an HP Branded Product warranty agent from the support 
contact list provided below. A service agent will work with you to troubleshoot your issue and if necessary, 
issue  a  Return  Material  Authorization  (RMA)...

76
Contact/phone Support:
CountryLanguageNumber
Europe Region (EMEA)
België Dutch and German+ 32 2700 1724
FrançaisFrench+ 33 171230454
Deutschland  German+ 49 6950073896
Ireland English+ 353 1850882016
Italia  Italian+ 39 269682189
Netherlands  Dutch+ 31 202015093
Espana  Spanish+ 34 914533458
Switzerland 
German/French/Italian + 41 18009686
UK English+ 44 2073652400
North America
United StatesEnglish1.866.694.7633
Canada English and French1.866.694.7633
CountryLanguageCityNumber
México EspañolMexico...