HP Photosmart Wireless e All in One Printer B110b User Manual

							3 How do I?
This section contains links to commonly performed tasks, such as printing photos,
scanning, and making copies.
TouchSmart Web ManagerScan to a computer
Replace the cartridgesCopy text or mixed documents
Load mediaClear the paper jam from the rear access door
How do I? 9
How do I?
 
						

							Chapter 3
10 How do I?
How do I?
 
						

							4Print
Print documents
Print photos
Print envelopes
Related topics
Load media
Tips for print success
Print documents
Most print settings are automatically handled by the software application. You need to
change the settings manually only when you change print quality, print on specific types
of paper or transparency film, or use special features.
To print from a software application
1.Make sure you have paper loaded in the paper tray.
2.On the File menu in your software application, click Print.
3.Make sure the product is the selected printer.
4.If you need to change settings, click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
NOTE:When printing a photo, you must select options for the specific photo
paper and photo enhancement.
5.Select the appropriate options for your print job by using the features available in the
Advanced, Printing Shortcuts, Features, and Color tabs.
TIP:You can easily select the appropriate options for your print job by choosing
one of the predefined print tasks on the Printing Shortcuts tab. Click a type of
print task in the Printing Shortcuts list. The default settings for that type of print
task are set and summarized on the Printing Shortcuts tab. If necessary, you
can adjust the settings here and save your custom settings as a new printing
shortcut. To save a custom printing shortcut, select the shortcut and click Save
As. To delete a shortcut, select the shortcut and click Delete.
Print 11
Print
 
						

							6.Click OK to close the Properties dialog box.
7.Click Print or OK to begin printing.
Related topics
Load media
Tips for print success
Print photos
Print photos saved on your computer
Print photos saved on your computer
To print a photo on photo paper
1.Remove all paper from the paper tray.
2.Place the photo paper print side down on the right side of the paper tray.
3.Slide the paper-width guide inward until it stops at the edge of the paper.
4.On the File menu in your software application, click Print.
5.Make sure the product is the selected printer.
6.Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties,
Options, Printer Setup, Printer, or Preferences.
7.Click the Features tab.
8.In the Basic Options area, from the Paper Type drop-down list, select More. Then,
select the appropriate photo paper type.
9.In the Resizing Options area, from the Size drop-down list, select More. Then, select
the appropriate paper size.
If the paper size and paper type are not compatible, the printer software displays an
alert and allows you to select a different type or size.
10.(Optional) Select the Borderless printing check box if it is not already checked.
If the borderless paper size and paper type are not compatible, the product software
displays an alert and allows you to select a different type or size.
Chapter 4
12 Print
Print
 
						

							11.In the Basic Options area, select a high print quality, such as Best, from the Print
Quality drop-down list.
NOTE:To achieve the highest dpi resolution, you can use the Maximum dpi
setting with supported types of photo paper. If Maximum dpi is not listed in the
Print quality drop-down list, you can enable it from the Advanced tab.
12.In the HP Real Life Technologies area, click the Photo fix drop-down list and select
from the following options:
•Off: applies no HP Real Life Technologies to the image.
•Basic: enhances low-resolution images; moderately adjusts image sharpness.
13.Click OK to return to the Properties dialog box.
14.Click OK, and then click Print or OK in the Print dialog box.
NOTE:Do not leave unused photo paper in the paper tray. The paper might start to
curl, which could reduce the quality of your printout. For best results, do not allow
printed photos to stack up in the paper tray.
Related topics
Load media
Tips for print success
Print envelopes
With the HP Photosmart, you can print on a single envelope, a group of envelopes, or
label sheets designed for inkjet printers.
To print a group of addresses on labels or envelopes
1.Print a test page on plain paper first.
2.Place the test page on top of the label sheet or envelope, and hold both up to the
light. Check the spacing for each block of text. Make adjustments as needed.
3.Load the labels or envelopes into the paper tray.
CAUTION:Do not use envelopes with clasps or windows. They can get stuck in
the rollers and cause paper jams.
4.Slide the paper-width guide inward against the stack of labels or envelopes until the
guide stops.
5.If you are printing on envelopes, do the following:
a. Display the print settings, and click the Features tab.
b. In the Resizing Options area, click the appropriate envelope size in the Size list.
6.Click OK, and then click Print or OK in the Print dialog box.
Related topics
Load media
Tips for print success
Print envelopes 13
Print
 
						

							Tips for print success
Use the following tips to print successfully.
Print tips
•Use genuine HP cartridges. Genuine HP cartridges are designed for and tested with
HP printers to help you produce great results, time after time.
•Make sure the cartridges have sufficient ink. To check the estimated ink levels, follow
the instruction in the Tools menu on the display. Alternatively, you can check the ink
levels in Printer Toolbox from the software.
•Load a stack of paper, not just one page. Use clean and flat paper of the same size.
Make sure only one type of paper is loaded at a time.
•Adjust the paper-width guide in the input tray to fit snugly against all paper. Make sure
the paper-width guide does not bend the paper in the input tray.
•Set the print quality and paper size settings according to the type and size of paper
loaded in the input tray.
•Use print preview to check margins. Do not let the margin settings for the document
exceed the printable area of the printer.
•Learn how to share your photos online and order prints. Click here to go online for
more information.
•Learn about TouchSmart Web Manager for printing recipes, coupons, and other
content from the web, simply and easily. Click here to go online for more information.
•Learn how to print from anywhere by sending an email and attachments to your
printer. Click here to go online for more information.
Chapter 4
14 Print
Print
 
						

							5 Copy and scan
•Scan to a computer
•Copy text or mixed documents
•Tips for copy and scan success
Scan to a computer
To scan to a computer
1.Load original.
a. Lift lid on product.
b. Load original print side down on right front corner of glass.
Copy and scan 15
Copy and scan
 
						

							c.Close lid.
2.Start scan.
a. On the Home screen, highlight Scan, and then press OK.
b. Highlight Scan to PC, and then press OK.
If product is network-connected, a list of available computers appears. Select
computer to which you want to transfer to start the scan.
3.View the animation for this topic.
Related topics
Tips for copy and scan success
Copy text or mixed documents
Copy text or mixed documents
1.Do one of the following:
Make a black and white copy
a. Load paper.
 Load full-size paper in paper tray.
b. Load original.
 Lift lid on product.
Chapter 5
16 Copy and scan
Copy and scan
 
						

							TIP:To make copies of thick originals, such as books, you can remove
the lid.
 Load original print side down on right front corner of glass.
Close lid.
c. Select Copy.
 On the Home screen, highlight Copy, and then press OK.
 Highlight Black Copy, and then press OK.
 Press the Settings button to change the copy size.
 Press Directional keys to change the number of copies.
d.Start copy.
 Press OK.
Make a color copy
a. Load paper.
 Load full-size paper in paper tray.
b. Load original.
 Lift lid on product.
Copy text or mixed documents 17
Copy and scan
 
						

							TIP:To make copies of thick originals, such as books, you can remove
the lid.
 Load original print side down on right front corner of glass.
Close lid.
c.Select Copy.
 On the Home screen, highlight Copy, and then press OK.
 Highlight Color Copy, and then press OK.
 Press the Settings button to change the copy size.
Press Directional keys to change the number of copies.
d. Start copy.
Press OK.
2.View the animation for this topic.
Related topics
Tips for copy and scan success
Chapter 5
18 Copy and scan
Copy and scan