HP Photosmart Premium e All in One Printer C310a User Manual

4Print
Print documents
Print photos
Print envelopes
Related topics
•Load media
Tips for print success
Print documents
Most print settings are automatically handled by the software application. You need to change the settings manually
only when you change print quality, print on specific types of paper or transparency film, or use special features.
To print from a software application
1.Make sure you have paper loaded in the paper tray.
2.On the File menu in your software application, click Print.
3.Make...

Print photos saved on your computer
To print a photo on photo paper
1.Make sure you have photo paper loaded in the photo tray.
2.Place the photo paper print side down on the right side of the photo tray.
3.Slide the paper-width guide inward until it stops at the edge of the paper.
4.On the File menu in your software application, click Print.
5.Make sure the product is the selected printer.
6.Click the button that opens the Properties dialog box.
Depending on your software application, this button might...

To print a group of addresses on labels or envelopes
1.Print a test page on plain paper first.
2.Place the test page on top of the label sheet or envelope, and hold both up to the light. Check the spacing for
each block of text. Make adjustments as needed.
3.Load the labels or envelopes into the paper tray.
CAUTION:Do not use envelopes with clasps or windows. They can get stuck in the rollers and cause paper
jams.
4.Slide the paper-width guide inward against the stack of labels or envelopes until the...

c. Lower photo tray lid.
Load A4 or 8.5 x 11 inch paper
a. Raise the photo tray.
 Slide paper-width guide outwards.
 Remove all paper from the main input tray.
b. Load paper.
 Insert stack of paper into main input tray with short edge forward and print side down.
 Slide stack of paper forward until it stops.
 Slide paper-width guide inward until it stops at edge of paper.
Chapter 4
12 Print
Print
 

 Lower the photo tray.
Load envelopes
a. Raise the photo tray.
 Slide paper-width guide outwards.
 Remove all paper from the main input tray.
b. Load envelopes.
 Insert one or more envelopes into far-right side of main input tray, with envelope flaps on left and facing
up.
 Slide stack of envelopes forward until it stops.
 Slide paper-width guide inward against stack of envelopes until it stops.
 Lower the photo tray.
2.View the animation for this topic. Some screens that appear in the animation...

Related topics
•Tips for print success
Clear the paper jam from the two-sided printing accessory.
To clear a paper jam from the two-sided printing accessory.
1.Turn product off.
2.Remove the two-sided printing accessory.
3.Remove jammed paper.
4.Replace two-sided printing accessory.
5.Turn on product.
6.Try printing again.
7.View the animation for this topic. Some screens that appear in the animation may not reflect your product.
Tips for print success
Use the following tips to print successfully.
Print...

•Use print preview to check margins. Do not let the margin settings for the document exceed the printable area
of the printer.
•Learn how to share your photos online and order prints. Click here to go online for more information.
•Learn about Apps Manager for printing recipes, coupons, and other content from the web, simply and easily.
Click here to go online for more information.
•Learn how to print from anywhere by sending an email and attachments to your printer. Click here to go online
for more...

Chapter 4
16 Print
Print
 

5 Copy and scan
•Scan to a computer
•Copy text or mixed documents
•Tips for copy and scan success
Scan to a computer
To scan to a computer
1.Load original.
a. Lift lid on product.
b. Load original print side down on right front corner of glass.
c.Close lid.
2.Start scan.
a. On the Home screen, highlight Scan, and then press OK.
b. Highlight Computer, and then press OK.
If product is network-connected, a list of available computers appears. Select computer to which you want
to transfer to start the scan....

Copy text or mixed documents
1.Do one of the following:
1-sided copy
a. Load paper.
 Load full-size paper in the main input tray.
b. Load original.
 Lift lid on product.
 Load original print side down on right front corner of glass.
Close lid.
c. Specify number of copies.
Touch Copy on Home screen.
The Copy preview appears.
 Touch the screen to set the number of copies.
d. Start copy.
Touch B&W or Color.
Chapter 5
18 Copy and scan
Copy and scan