HP Photosmart Plus B209c User Manual

▲Turn on the wireless radio for the HP Photosmart and the wireless radio on your
computer. On your computer, connect to the network name (SSID) hpsetup, which
is the default ad hoc network created by the HP Photosmart.
OR
▲Use an ad hoc network profile on your computer to connect to the product. If your
computer is not currently configured with an ad hoc network profile, consult the Help
file for your computer Operating System for the proper method to create an ad hoc
profile on your computer. Once the...

e.In the Network key box, type a WEP key that has exactly 5 or exactly 13
alphanumeric (ASCII) characters. For example, if you enter 5 characters, you
might enter ABCDE or 12345. Or, if you enter 13 characters, you might enter
ABCDEF1234567. (12345 and ABCDE are examples only. Select a combination
of your choosing.)
Alternatively, you can use HEX (hexadecimal) characters for the WEP key. A HEX
WEP key must be 10 characters for 40 bit encryption, or 26 characters for 128 bit
encryption.
f.In the Confirm...

NOTE:If your computer is configured to connect to a series of network drives, make
sure that your computer is currently connected to these drives before installing the
software. Otherwise, the HP Photosmart software installer might try to use one of the
reserved drive letters and you will not be able to access that network drive on your
computer.
NOTE:Installation time can range from 20 to 45 minutes depending on your
operating system, the amount of available space, and the processor speed of your...

 A Bluetooth (compatible HCRP or SPP profile) capable device (such as a PDA,
camera phone, or computer)
 An HP Bluetooth Adapter
Some Bluetooth products exchange device addresses when they communicate with each
other, so you might also need to find out the device address of the HP Photosmart in
order to establish a connection.
To find out the device address of the product
1.Insert the HP Bluetooth Adapter into the front USB port.
2.On the Home Screen, touch the right arrow to view more options.
3.Touch...

•Microsoft stack: If you have Windows Vista or Windows XP with Service Pack 2
installed on your computer, then your computer has the Microsoft Bluetooth® Protocol
Stack. The Microsoft stack allows you to install an external Bluetooth® adapter
automatically. If your Bluetooth® adapter supports the Microsoft stack but it does not
install automatically, then you do not have the Microsoft stack on your computer.
Check the documentation that came with the Bluetooth® adapter to see if it supports
the Microsoft...

To install and print using the Widcomm stack
1.Make sure that you have installed the product software on the computer.
NOTE:The purpose of installing the software is to make sure the printer driver
is available for the Bluetooth® connection. Therefore, if you have already installed
the software, you do not need to reinstall it. If you want both a USB and a
Bluetooth® connection to the product, install the USB connection first. For more
information, see the setup instructions. However, if you do not want...

Chapter 2
14 Finish setting up the HP Photosmart
Finish setting up the HP Photosmart
 

3 Get to know the HP Photosmart
•Printer parts
•Control panel features
Printer parts
•Front view of the HP Photosmart
Get to know the HP Photosmart 15
Get to know the HP Photosmart
 

1Lid
2Color graphics display (also referred to as the display)
3Photo tray
4Memory Card slots LED
5Memory Card slot for Secure Digital and XD cards
6Memory Card slot for Memory Stick cards
7Front USB port for your PictBridge-compatible digital camera, other storage devices, and
external Bluetooth adapter.
8Output tray
9Paper tray extender (also referred to as the tray extender)
10Paper-width guide for the photo tray
11Cartridge door access handle
12Lid backing
13Glass
14On button: Turns the product on or...

19Cartridge access area
20Printhead assembly
21Model number location
22Rear USB port
23Power connection (Use only with the power adapter supplied by HP.)
Printer parts 17
Get to know the HP Photosmart