HP Photosmart C4783 User Manual

HP Photosmart C4700 series
 

Contents
1 HP Photosmart C4700 series Help..........................................................................................3
2 Finish setting up the HP Photosmart
Add the HP Photosmart to a network ........................................................................................5
Set up a USB connection ........................................................................................................10
3 Get to know the HP Photosmart
Printer parts...

14 Technical information
Notice .....................................................................................................................................105
Specifications ........................................................................................................................105
Environmental product stewardship program ........................................................................106
Regulatory notices...

1 HP Photosmart C4700 series Help
For information about the HP Photosmart, see:
•“
Finish setting up the HP Photosmart” on page 5
•“
Get to know the HP Photosmart” on page 11
•“
How do I?” on page 13
•“
Print” on page 21
•“
Scan” on page 33
•“
Copy” on page 37
•“
Reprint photos” on page 43
•“
Save photos” on page 45
•“
Work with cartridges” on page 47
•“
Technical information” on page 105
HP Photosmart C4700 series Help 3
HP Photosmart C4700 series Help
 

Chapter 1
4 HP Photosmart C4700 series Help
HP Photosmart C4700 series Help
 

2 Finish setting up the
HP Photosmart
•Add the HP Photosmart to a network
•
Set up a USB connection
Add the HP Photosmart to a network
•“WiFi Protected Setup (WPS)” on page 5
•“
Wireless with a router (infrastructure network)” on page 6
•“
Wireless without a router (ad hoc connection)” on page 7
WiFi Protected Setup (WPS)
To connect the HP Photosmart to a wireless network using WiFi Protected Setup (WPS),
you will need the following:
❑A wireless 802.11 network that includes a WPS-enabled wireless router...

❑Press button next to WPS.
❑Press button next to PIN.
The device displays a PIN.
❑Enter the PIN on WPS-enabled router or other networking device.
❑Press OK.
b. Install software.
NOTE:The product begins a timer for approximately two minutes in which the
PIN needs to be entered on the networking device.
2.View the animation for this topic.
Related topics
“
Install the software for a network connection” on page 9
Wireless with a router (infrastructure network)
The HP Photosmart Software CD and included USB...

To connect the product
1.Insert the product Software CD in the computer CD-ROM drive.
2.Follow the instructions on the screen.
When you are prompted, connect the product to the computer using the USB setup
cable included in the box. The product will attempt to connect to the network. If the
connection fails, follow the prompts to correct the problem, and then try again.
3.When the setup is finished, you will be prompted to disconnect the USB cable and
test the wireless network connection. Once the...

To connect the HP Photosmart to a Windows computer with an ad hoc connection, the
computer must have a wireless network adapter and an ad hoc profile. Create a network
profile for a Windows Vista or Windows XP computer using the directions below.
NOTE:If you have an operating system other than Windows Vista or Windows XP,
HP recommends that you use the configuration program that came with your wireless
LAN card. To find the configuration program for your wireless LAN card, access your
computers list of...