HP Photosmart C4583 User Manual

Chapter 5
28 How do I?
How do I?
 

6 Load originals and load paper
You can load many different types and sizes of paper in the HP All-in-One, including letter
or A4 paper, photo paper, transparencies, and envelopes. By default, the HP All-in-One
is set to detect the size and type of paper you load in the input tray automatically and then
adjust its settings to generate the highest quality output for that paper.
If you are using special papers, such as pho to paper, transparency film, envelopes, or
labels, or if you experience poor print...

3.Close the lid.
To load a thick publication on the glass
1. Lift the lid to the open position, grasp the sides of the lid, and then push the lid away
from the product until it comes off.
2.Load the thick publication print side down on the right front corner of the glass.
TIP: For more help on loading the thick publication, refer to the engraved guides
along the edge of the glass.
Chapter 6
30 Load originals and load paper
Load originals and load paper
 

3.Place the lid over the thick publication while you are copying or scanning.
4.When you finish copying or scanning, replace the lid by inserting the tabs on the lid
back into the appropriate slots of the product.
Choose papers for printing and copying
You can use different types and sizes of paper in the HP All-in-One. Review the following
recommendations to get the best printing and copying quality. If you use plain or photo
paper, the HP All-in-One can automatically detect the paper type and size. If...

This section contains the following topics:
•
Recommended papers for printing and copying
•
Recommended papers for printing only
•
Papers to avoid
Recommended papers for printing and copying
If you want the best print quality, HP recommends using HP papers that are specifically
designed for the type of project you are printing. If you are printing photos, for example,
load HP Premium or HP Premium Plus photo paper in the input tray.
The following is a list of HP papers you can use for copying and...

HP Bright White Inkjet Paper
HP Bright White Inkjet Paper delivers high-contrast colors and sharp text. It is opaque
enough for two-sided color usage with no show-through, which makes it ideal for
newsletters, reports, and flyers.
HP All-in-One Paper or HP Printing Paper
• HP All-in-One Paper is specifically designed for HP All-in-One products. It has an
extra bright blue-white shade that produc es sharper text and richer colors than
ordinary multifunction papers.
• HP Printing Paper is a high-quality...

NOTE:At this time, some portions of the HP Web site are available in English only.
Papers to avoid
Using paper that is too thin or too thick, paper that has a slick texture, or paper that
stretches easily can cause paper jams. Using paper that has a heavy texture or does not
accept ink can cause printed images to smear, bleed, or not fill in completely.
Papers to avoid for all print and copy jobs
•Any size paper other than those listed in the printer software.
• Paper with cutouts or perforations...

To load full-size paper
1.Slide the paper-width guide to its outermost position.
NOTE: If you are using letter or A4 paper or smaller, make sure the tray extender
is open all the way. When you use legal-siz e paper, leave the tray extender closed.
TIP:Tap a stack of paper on a flat surface to align the edges. Make sure all the
paper in the stack is the same size and type and free of rips, dust, wrinkles, and
curled or bent edges.
2. Insert the stack of paper into the input tray with the short edge...

To load small-size photo paper in the input tray
1.Slide the paper-width guide to its outermost position.
2.Insert the stack of p hoto paper into the far-ri ght side of the input tray with the short
edge forward and the print side down. Slide the stack of photo paper forward until it
stops.
If the photo paper you are using has perforated tabs, load the photo paper so that the
tabs are closest to you.
3. Slide the paper-width guide inward until it stops at the edge of the paper.
Do not overload the input...

Load index cards
You can load index cards into the input tray of the HP All-in-One to print notes, recipes,
and other text.
To load index cards in the input tray
1.Remove all paper from the input tray.
2.Slide the paper-width guide to its outermost position.
3.Insert the stack of ca rds into the far-right side of th e input tray with the short edge
forward and the print side down. Slide the stack of cards forward until it stops.
Load paper 37
Load originals and load paper