HP Photosmart C4580 User Manual

4.Press  OK.
A preview image of the scan appears on the display.
5. (Optional) Press Settings to change the  Print Size, Borderless  setting, or number
of copies. When you are done, press  OK.
6. Press the button next to  Print.
Scan an image or document
For original documents or images placed on the glass, you can start a scan from your
computer or from the HP All-in-One. This section explains the second option: how to scan
from the control panel of the HP All-in-One to a computer.
To use the scan...

NOTE:Ensure that there are no memory card s inserted in the memory card slots
on the product.
2. Press the button next to  Scan/Reprint.
3. Press the button next to  Scan to PC.
NOTE:If the product is network-connected, a list of available computers
appears. Select the computer to which you want to transfer the scan, and then
continue to the next step.
A preview image of the scan appears on your computer, where you can edit it. Any
edits that you make apply to  the current scan session only.
The HP...

NOTE:If you are using the HP Photosmart Software, the Optical Character
Recognition (OCR) software might not be installed on your computer. To install the
OCR software, you must  re-insert the software disk and select  OCR under the
Custom  installation options.
Related topics
“
Use the HP Photosmart Software” on page 8
Stop scanning
To stop scanning
▲Press Cancel.
Chapter 9
70 Use the scan features
Scan
 

10 Use the copy features
The HP All-in-One allows you to produce high-quality color and black-and-white copies
on plain or photo paper. You can enlarge or reduce the size of an original to fit a specific
paper size, adjust the copy quality, and make high-quality copies of photos, including
borderless copies.
This section contains the following topics:
•
Make a copy
•
Change the copy settings for the current job
•
Perform special copy jobs
•
Stop copying
Make a copy
You can make quality copies from the...

Change the copy settings for the current job
You can customize the copy settings of the HP All-in-One to handle nearly any copy task.
This section contains the following topics:
•
Make multiple copies of the same original
•
Change copy speed or quality
Make multiple copies of the same original
You can set the number of copies from the control panel of the HP All-in-One or from the
HP Photosmart Software. This task explains how to set the number of copies from the
control panel only.
NOTE: For...

4.Press the button next to  Copies to increase the number of copies. When you reach
the maximum, the settin g returns to 1 copy.
5. Press  OK.
6. Press the button next to  Start Copy Black or Start Copy Color .
In this example, the product makes six copies of the original 10 x 15 cm (4 x 6 inch)
photo.
Change copy speed or quality
The HP All-in-One, provides three options, indicated by one, two, or three stars, that affect
copy speed and quality:
• One star copies faster than the other two quality...

3.Press Settings.
The Settings menu appears.
4. Press the button next to  Quality to select one star, two stars, or three stars.
5. Press  OK.
6. Press the button next to  Start Copy Black or Start Copy Color .
Perform special copy jobs
In addition to supporting standard copy jobs, the HP All-in-One can perform special jobs
such as copying borderless photos and resizing originals.
This section contains the following topics:
•
Make a borderless copy of a photo
•
Resize an original to fit onto letter or...

2.Load your original photo print side down on the right front corner of the glass.
3.Press Settings.
The Settings menu appears.
4. Press the button next to  Size to select  Borderless .
5. Press  OK.
6. Press the button next to  Start Copy Color.
The product makes a borderless copy of  your original photo, as shown below.
Resize an original to fit onto letter or A4 paper
You can use the Resize to Fit feature to copy an original to fit within the printable margins
of a page without the risk of cropping...

•If you enlarge a 10 x 15 cm (4 x 6 inch) photo to make a borderless full-size copy on
letter or A4 paper, some part of your photo will be cropped. The  Resize to Fit feature
will enlarge the photo as much as possible to fit the page without cropping any part
of your photo.
• If the image or text on your original fills the entire sheet of paper with no margins, you
can use the  Resize to Fit  feature to reduce your original and prevent unwanted
cropping of the text or images at the edges of the sheet....

3.Press Settings.
The Settings menu appears.
4. Press the button next to  Size to select  Resize to Fit .
5. Press  OK.
6. Press the button next to  Start Copy Black or Start Copy Color .
Stop copying
To stop copying
▲Press Cancel.
Stop copying 77
Use the copy features