HP Photosmart 5510 User Manual

							4Print
Print photos from a memory card on page 9
Print from anywhere on page 11
Manage apps on page 12
Related topics
• Load media on page 10
Tips for print success on page 13
Print photos from a memory card
To print photos from a memory card
1.Load photo paper into the paper tray.
2.Make sure the paper tray extender is open.
3.Insert a memory card into the memory card slot.
4.From the Home screen, touch Photo to display the Photo menu.
5.On the Photo menu, touch View & Print to display photos.
6.Touch a photo that you want to print.
7.Touch the up or down arrow to specify the number of photos to print.
8.Touch Edit to select options to edit the selected photos. You can rotate, crop a photo, or turn Photo Fix on
and off.
9.Touch Preview to preview the selected photo. If you wish to adjust layout, paper type, red eye removal, or
date stamp, touch Settings, and then touch your selection. You can also save any new settings as defaults.
10.Touch Print to begin printing.
Related topics
• Load media on page 10
Tips for print success on page 13
Print 9
Print
 
						

							Load media
▲Do one of the following:
Load small-size paper
a. Pull out the paper tray, slide the paper-width guides outward, and then remove any other media
previously loaded.
b. Load paper.
❑Insert a stack of photo paper into the paper tray with short edge forward and print side down.
❑Slide photo paper forward until it stops.
NOTE:If the photo paper you are using has perforated tabs, load photo paper so that tabs are
closest to you.
❑Slide paper-width guides inward until they touch the paper.
❑Close the paper tray, and then open the paper tray extender.
Load full-size paper
a. Slide the paper-width guides outward, and then remove any other media previously loaded.
Chapter 4
10 Print
Print
 
						

							b. Load paper.
❑Insert a stack of paper into paper tray with short edge forward and print side down.
❑Slide paper forward until it stops.
❑Slide paper-width guides inward until they stop at the edges of paper.
❑Open the paper tray extender.
Print from anywhere
HP’s free ePrint service provides an easy way to print from email, anywhere and anytime. Just forward an email
to your printers email address from your computer or mobile device, and both the email message and recognized
attachments will print.
•Your printer needs to have a wireless network connection to the Internet. You wont be able to use ePrint via
a USB connection to a computer.
•Attachments might print differently from the way they appear in the software program that created them,
depending on the original fonts and layout options used.
•Free product updates are provided with ePrint. Some updates might be required to enable certain
functionality.
Related topics
• Your printer is protected on page 12
How to get started with ePrint on page 12
Use the HP ePrintCenter website on page 12
Print from anywhere 11
Print
 
						

							Your printer is protected
To help prevent unauthorized email, HP assigns a random email address to your printer and never publicizes this
address. ePrint also provides industry-standard spam filtering and transforms email and attachments to a print-
only format to reduce the threat of virus or other harmful content. However, the ePrint service does not filter
emails based on content, so it cannot prevent objectionable or copyrighted material from being printed.
Go to the HP ePrintCenter website for more information and specific terms and conditions: www.hp.com/go/
ePrintCenter.
How to get started with ePrint
To use ePrint, make sure your printer is connected to a wireless network with Internet access and web services
enabled.
To get started with ePrint
1.Turn on wireless radio to connect to a wireless network.
a. Touch the Wireless button on the control panel to check the wireless status. If It shows Connected, and
details like IP address and network name appears, the printer has connected wirelessly to the network.
b. If it shows Wireless Off, touch Turn On, and then the printer will try to connect wirelessly to a network.
If you havent set up the wireless network connection before, follow the prompts on the screen to set up
wireless network connection.
2.Enable Web services.
a. Touch ePrint on the control panel to check the web services status. If ePrint email address appears,
ePrint Status shows Connected, and ePrint Feature shows On, web services are enabled and ready for
use.
b.If the Web Services screen is prompted, touch Yes to enable web services.
If the Server Connection Error screen is prompted, touch Retry or Enter Proxy to configure Web proxy
settings.
3.Touch ePrint on the control panel. From the Web Services Summary screen, get your printers email
address.
4.Compose and send email to your printers email address from your computer or mobile device, anywhere and
anytime. Both the email message and recognized attachments will print.
Use the HP ePrintCenter website
Use HP’s free ePrintCenter website to set up increased security for ePrint and specify the email addresses that
are allowed to send email to your printer. You can also get Product Updates, more Apps, and other free services.
Go to the HP ePrintCenter website for more information and specific terms and conditions: www.hp.com/go/
ePrintCenter.
Manage apps
Print pages from the web, without using a computer, by setting up Apps, a free service from HP. You can print
coloring pages, calendars, puzzles, recipes, maps, and more, depending on the apps available in your country/
region.
Touch the Get More icon on the Apps screen to connect to the Internet and add more. You need to have web
services enabled in order to use apps.
Chapter 4
12 Print
Print
 
						

							To manage apps
1.Add apps
a. From the Home screen, touch Apps, and then touch the Get More icon.
b. Touch an app icon that you want to add.
c. Touch Add to confirm.
2.Remove apps
a. From the Home screen, touch Apps, and then touch the Get More icon.
b. Touch one or more apps icons to select the apps that you want to remove.
c. Touch Yes to confirm.
Go to the HP ePrintCenter website for more information and specific terms and conditions: www.hp.com/go/
ePrintCenter.
Tips for print success
Use the following tips to print successfully.
Tips for printing from computer
If you want to print documents, photos, or envelopes from computer, click the following links. They will direct you
to online instructions according to the operating system you are using.
•Learn how to print documents from computer. Click here to go online for more information.
•Learn how to print photos saved on your computer. Learn information about print resolution and how to
enable maximum dpi resolution. Click here to go online for more information.
•Learn how to print envelopes from computer. Click here to go online for more information.
Tips for ink and paper
•Use genuine HP cartridges. Genuine HP cartridges are designed for and tested with HP printers to help you
produce great results, time after time.
•Make sure the cartridges have sufficient ink. To view the estimated ink levels, touch the Ink icon from the
Home screen.
•To learn more tips about working with cartridges, see Tips for working with cartridges on page 23 for more
information.
•Load a stack of paper, not just one page. Use clean and flat paper of the same size. Make sure only one type
of paper is loaded at a time.
•Adjust the paper-width guides in the paper tray to fit snugly against all paper. Make sure the paper-width
guides do not bend the paper in the paper tray.
•Set the print quality and paper size settings according to the type and size of paper loaded in the paper tray.
•To clear paper jam, see Clear paper jam on page 29 for more information.
Tips for printing apps and using ePrint
•Learn how to share your photos online and order prints. Click here to go online for more information.
•Learn about apps for printing recipes, coupons, and other content from the web, simply and easily. Click here
to go online for more information.
•Learn how to print from anywhere by sending an email and attachments to your printer. Click here to go
online for more information.
•If you have enabled Auto Power-Off, you should disable Auto Power-Off to use ePrint. See Auto Power-Off
on page 44 for more information.
Tips for print success 13
Print
 
						

							Chapter 4
14 Print
Print
 
						

							5 Copy and scan
•Copy text or mixed documents
•Scan to a computer or memory card
•Tips for copy and scan success
Copy text or mixed documents
▲Do one of the following:
Make a black and white copy
a. Load paper.
❑Load full-size paper in the paper tray.
❑Make sure the paper tray extender is open.
b. Load original.
❑Lift lid on the product.
TIP:To make copies of thick originals, such as books, you can remove the lid.
❑Load original print side down on the right front corner of glass.
Copy and scan 15
Copy and scan
 
						

							❑Close lid.
c. Specify number of copies and settings.
❑From the Home screen, touch Copy, and then touch Black.
❑Touch Settings to specify paper size, paper type, quality, or other settings.
❑Touch directional buttons to change the number of copies.
d.Start copy.
❑Touch Start.
Make a color copy
a. Load paper.
❑Load full-size paper in the paper tray.
❑Make sure the paper tray extender is open.
b. Load original.
❑Lift lid on the product.
TIP:To make copies of thick originals, such as books, you can remove the lid.
❑Load original print side down on the right front corner of glass.
Chapter 5
16 Copy and scan
Copy and scan
 
						

							❑Close lid.
c. Select Copy.
❑From the Home screen, touch Copy, and then touch Color.
❑Touch Settings to specify paper size, paper type, quality, or other settings.
❑Touch directional buttons to change the number of copies.
d.Start copy.
❑Touch Start.
Related topics
• Tips for copy and scan success on page 18
Scan to a computer or memory card
You can start a scan to a computer either from the printer display or from the printer software on your computer.
Starting a scan from the printer display is quick. Starting a scan from the software gives you more options.
Before starting scan to a computer from the printer display, make sure the printer is connected to your computer
either on a wireless network or through a USB cable.
If the printer is connected to the computer through a USB cable, you can start scan immediately from the printer
display.
If the printer is connected to a Windows computer on a wireless network, you need to enable wireless scan in the
software first. From the Start menu on your computer, click All Programs, and then click HP. Under
HP Photosmart 5510 series, click HP Photosmart 5510 series, click Scanner Actions, and then click Manage
Scan to Computer.
NOTE:You can choose to keep the Scan to Computer option always active, and then you will not need to
enable wireless scan again next time you start a scan from the printer display.
To scan to a computer or memory card from the printer display
1.Load original.
a. Lift lid on the product.
b. Load original print side down on the right front corner of glass.
Scan to a computer or memory card 17
Copy and scan
 
						

							c.Close lid.
2.To scan to a memory card, insert a memory card in the memory card slot.
If you want to scan to a computer, make sure the printer is connected to your computer on a wireless network
or through a USB cable.
3.Start scan.
a. From the Home screen, touch Scan.
b. Select the destination by touching either Computer or Memory Card.
To scan to a computer, select the computer, and then select a scan type to start the scan. If your
computer is not listed, touch Not listed for further information.
Related topics
• Tips for copy and scan success on page 18
Tips for copy and scan success
Use the following tips to copy and scan successfully:
•Keep the glass and the back of the lid clean. The scanner interprets anything it detects on the glass as part of
the image.
•Load your original, print side down, on the right front corner of the glass.
•To copy or scan a book or other thick originals, remove the lid.
•To make a large copy of a small original, scan the original into the computer, resize the image in the scanning
software, and then print a copy of the enlarged image.
•If you want to adjust scan size, output type, scan resolution, or file type, and so on, start scan from the printer
software.
•To avoid incorrect or missing scanned text, make sure the brightness is set appropriately in the software.
Chapter 5
18 Copy and scan
Copy and scan