HP Pavilion Tx1200 Notebook Pc Series Service Guide

Spare part
numberDescription
412175-001DVB-T tuner
412176-001DVB-T antenna adapter
412390-001RTC battery
412766-002Bluetooth module (includes Bluetooth module cable)
418162-001HP carrying case
430958-001Wireless laser mouse
431371-001AMD Turion 64 Mobile Technology TL-50 processor (1.6-GHz, 512-GB L2 cache)
431372-001AMD Turion 64 Mobile Technology TL-52 processor (1.6-GHz, 1-MB L2 cache)
431373-001AMD Turion 64 Mobile Technology TL-56 processor (1.8-GHz, 1-MB L2 cache)
435675-001HP remote control III...

Spare part
numberDescription
441111-00112.1-inch, WXGA, BrightView, touch screen display assembly with WWAN and WLAN antenna cables
441112-00112.1-inch, WXGA, BrightView, touch screen display assembly with Web camera and WWAN and WLAN
antenna cables
441113-00112.1-inch, WXGA, BrightView, touch screen displa y assembly with fingerprint reader and WWAN and
WLAN antenna cables
441114-00112.1-inch, WXGA, BrightView, touch screen display  assembly with Web camera, fingerprint reader, and
WWAN and WLAN...

Spare part
numberDescription
441137-001Base enclosure for use only with computer models not equipped with WWAN
441138-001Plastics Kit (includes ExpressCard slot bezel, display connector cover, WLAN module compartment cover,
memory module compartment co ver, and hard drive cover)
441139-001Rubber Feet Kit (includes 3 base enclosure rubber feet, 2 top cover bumper pads, 8 display bezel screw
covers, pen cover, and WWAN external antenna cover)
441140-001Screw Kit
441142-001Power switch assembly (includes...

Spare part
numberDescription
441406-001PC2-5300, 667-MHz, 1024-MB, 1-DIMM memory module
441758-001Display panel for use only with computer models not  equipped with touch screen display assemblies (includes
display panel cable, Web camera c able, and fingerprint reader cable)
441759-001Display panel for use only with computer models equi pped with touch screen display assemblies (includes
display panel cable, Web camera c able, and fingerprint reader cable)
442023-001 WWAN module
ENWW Sequential part...

5Removal and replacement
procedures
Preliminary replacement requirements
Tools required
You will need the following tools to comple te the removal and replacement procedures:
● Magnetic screwdriver
● Phillips P0 and P1 screwdrivers
● Flat-bladed screwdriver
Service considerations
The following sections include some of the considerations
 that you should keep in mind during disassembly
and assembly procedures.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all...

Cables and connectors
CAUTION:When servicing the computer, be sure th at cables are placed in their proper
locations during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoi d damage. Apply only the tension required to unseat
or seat the cables during removal and insertion. Ha ndle cables by the connector whenever possible. In
all cases, avoid bending, twisting,  or tearing cables. Be sure that cables are routed in such a way that...

Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitiv e to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sens itivity. Networks built into many integr ated circuits provide some protection,
but in many cases, ESD contains enough power to  alter device parameters or melt silicon junctions.
A discharge of static electricity fr om a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is...

Packaging and transporting guidelinesFollow these grounding guidelines when  packaging and transporting equipment:
● To avoid hand contact, transport products
 in static-safe tubes, bags, or boxes.
● Protect ESD-sensitive parts and assemblies with co
nductive or approved containers or packaging.
● Keep ESD-sensitive parts in their containers unti
l the parts arrive at static-free workstations.
● Place items on a grounded surface before
 removing items from their containers.
● Always be properly grounded...

Equipment guidelinesGrounding equipment must include either a wrist st rap or a foot strap at a grounded workstation.
● When seated, wear a wrist strap connected to a gr
ounded system. Wrist straps are flexible straps
with a minimum of one megohm ±10% resistance in  the ground cords. To provide proper ground,
wear a strap snugly against the skin at all time s. On grounded mats with banana-plug connectors,
use alligator clips to  connect a wrist strap.
● When standing, use foot straps and a grounded...

Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 65 screws, in 10 different size s, that must be removed, replaced, or loosened when
servicing the computer. Make spec ial note of each screw size and location during removal and
replacement.
Serial number
Report the computer serial number to HP when reques ting information or ordering spare parts. The serial
number is located on the bottom of the computer.
ENWW Component replacement procedures...