HP Pavilion Touchsmart 14 N000 Ultrabook User Manual

							NOTE:The functional range (how far your wireless signals travel) depends on WLAN
implementation, router manufacturer, and interference from other electronic devices or structural
barriers such as walls and floors.
Using Bluetooth wireless devices (select models only)
A Bluetooth device provides short-range wireless communications that replace the physical cable
connections that traditionally link electronic devices such as the following:
●Computers (desktop, notebook, PDA)
●Phones (cellular, cordless, smart phone)
●Imaging devices (printer, camera)
●Audio devices (headset, speakers)
●Mouse
Bluetooth devices provide peer-to-peer capability that allows you to set up a PAN of Bluetooth
devices. For information about configuring and using Bluetooth devices, see the Bluetooth software
Help.
Connecting to a wired network
Connecting to a local area network (LAN)
Use a LAN connection if you want to connect the computer directly to a router in your home (instead
of working wirelessly), or if you want to connect to an existing network at your office.
Connecting to a LAN requires an 8-pin, RJ-45 (network) cable.
To connect the network cable, follow these steps:
1.Plug the network cable into the network jack (1) on the computer.
2.Plug the other end of the network cable into a network wall jack (2) or router.
NOTE:If the network cable contains noise suppression circuitry (3), which prevents
interference from TV and radio reception, orient the circuitry end of the cable toward the
computer.
Connecting to a wired network 21 
						

							4 Enjoying entertainment features
Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your
music, and download and watch movies. Or, to make your computer an even more powerful
entertainment center, connect external devices like a monitor, projector, or TV, or speakers and
headphones.
Multimedia features
Here are some of the entertainment features on your computer.
Component Description
(1)  Internal microphones (2) Record sound.
(2)  Webcam light On: The webcam is in use.
(3)  Webcam Records video and captures photographs. Some
models may allow you to video conference and chat
online using streaming video.
From the Start screen, type c, and then select
CyberLink YouCam from the list of applications.
22 Chapter 4   Enjoying entertainment features 
						

							Component Description
(4)  Optical drive Reads and/or writes, depending on your computer
model, to an optical disc.
NOTE:For disc compatibility information, navigate
to the Help and Support webpage (see 
More HP
resources on page 3). Follow the web page
instructions to select your computer model. Select
Support & Drivers, and then select Product
Information.
(5)
USB 2.0 port Connects an optional USB device, such as a
keyboard, mouse, external drive, printer, scanner or
USB hub.
(6)
Audio-out (headphone) jack/Audio-in
(microphone) jackConnects optional powered stereo speakers,
headphones, earbuds, a headset, or a television
audio cable. Also connects an optional headset
microphone. This jack does not support optional
microphone-only devices.
WARNING!To reduce the risk of personal injury,
adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety
information, refer to the Regulatory, Safety, and
Environmental Notices. To access this guide, from
the Start screen, type support, select the HP
Support Assistant app, select My computer, and
then select User guides.
NOTE:When a device is connected to the jack,
the computer speakers are disabled.
NOTE:Be sure that the device cable has a 4-
conductor connector that supports both audio-out
(headphone) and audio-in (microphone).
(7)  Speakers (2) Produce sound.
(8)
Memory card reader Connects optional memory cards that store,
manage, share, or access information.
To insert:
1.Hold the card, label side up with connectors
facing the slot and push in the card until it is
firmly seated.
To remove:
1.Press in on the card and quickly release it until
it pops out.
(9)
USB 3.0 ports (2) Connect optional USB device, such as a keyboard,
mouse, external drive, printer, scanner or USB hub.
(10)
HDMI port Connects an optional video or audio device, such as
a high-definition television, any compatible digital or
audio component, or a high-speed HDMI device.
Multimedia features 23 
						

							Using the webcam
Your computer has an integrated webcam that records video and captures photographs. Some
models may allow you to video conference and chat online using streaming video.
▲To start the webcam, from the Start screen, type c, and then select CyberLink YouCam from
the list of applications.
For details about using the webcam, go to Help and Support. From the Start screen, type h, and then
select Help and Support.
Using audio
On your computer, you can play music CDs, download and listen to music, stream audio content from
the web (including radio), record audio, or mix audio and video to create multimedia. To enhance your
listening enjoyment, attach external audio devices such as speakers or headphones.
Connecting speakers
You can attach wired speakers to your computer by connecting them to a USB port or to the audio-
out (headphone) jack on your computer or on a docking station.
To connect wireless speakers to your computer, follow the device manufacturers instructions. To
connect high-definition speakers to the computer, see 
Setting up HDMI audio on page 28. Before
connecting speakers, lower the volume setting.
Connecting headphones
You can connect wired headphones to the headphone jack on your computer.
To connect wireless headphones to your computer, follow the device manufacturers instructions.
WARNING!To reduce the risk of personal injury, lower the volume setting before putting on
headphones, earbuds, or a headset. For additional safety information, see the Regulatory, Safety and
Environmental Notices. To access this guide, from the Start screen, type support, select the HP
Support Assistant app, select My computer, and then select User guides.
Connecting a microphone
To record audio, connect a microphone to the microphone jack on the computer. For best results
when recording, speak directly into the microphone and record sound in a setting free of background
noise.
Testing your audio features
To check the audio functions on your computer, follow these steps:
1.From the Start screen, type c, and then select Control Panel from the list of applications.
2.Select Hardware and Sound, and then select Sound.
3.When the Sound window opens, select the Sounds tab. Under Program Events, select any
sound event, such as a beep or alarm, and then click Test.
You should hear sound through the speakers or through connected headphones.
24 Chapter 4   Enjoying entertainment features 
						

							To check the recording functions on your computer, follow these steps:
1.From the Start screen, type s, and then select Sound Recorder.
2.Click Start Recording and speak into the microphone.
3.Save the file to your desktop.
4.Open a multimedia program and play the recording.
To confirm or change the audio settings on your computer, follow these steps:
1.From the Start screen, type c, and then select Control Panel from the list of applications.
2.Select Hardware and Sound, and then select Sound.
Using video
Your computer is a powerful video device that enables you to watch streaming video from your
favorite websites and download video and movies to watch on your computer when you are not
connected to a network.
To enhance your viewing enjoyment, use one of the video ports on the computer to connect an
external monitor, projector, or TV. Your computer has a high-definition multimedia interface (HDMI)
port, which allows you to connect a high-definition monitor or TV.
IMPORTANT:Be sure that the external device is connected to the correct port on the computer,
using the correct cable. Check the device manufacturers instructions.
NOTE:Your computer may have a video graphics array (VGA) port adapter, which connects analog
video devices.
Using video 25 
						

							Connecting video devices using a VGA cable
To see the computer screen image on an external VGA monitor or projected for a presentation,
connect a monitor or projector to the computers VGA port or adapter.
To connect a monitor or projector:
1.Connect the VGA cable from the monitor or projector to the VGA port or adapter on the
computer as shown.
2.Press f4 to alternate the screen image between 4 display states:
●PC Screen only: View the screen image on the computer only.
●Duplicate: View the screen image simultaneously on both the computer and the external
device.
●Extend: View the screen image extended across both the computer and the external
device.
●Second screen only: View the screen image on the external device only.
Each time you press f4, the display state changes.
NOTE:For best results, especially if you choose the Extend option, adjust the screen
resolution of the external device, as follows. From the Start screen, type c, and then select
Control Panel from the list of applications. Select Appearance and Personalization. Under
Display, select Adjust screen resolution.
26 Chapter 4   Enjoying entertainment features 
						

							Connecting video devices using an HDMI cable
NOTE:To connect an HDMI device to your computer, you need an HDMI cable, sold separately.
To see the computer screen image on a high-definition TV or monitor, connect the high-definition
device according to the following instructions.
1.Connect one end of the HDMI cable to the HDMI port on the computer.
2.Connect the other end of the cable to the high-definition TV or monitor.
3.Press f4 to alternate the computer screen image between 4 display states:
●PC screen only: View the screen image on the computer only.
●Duplicate: View the screen image simultaneously on both the computer and the external
device.
●Extend: View the screen image extended across both the computer and the external
device.
●Second screen only: View the screen image on the external device only.
Each time you press f4, the display state changes.
NOTE:For best results, especially if you choose the “Extend” option, adjust the screen
resolution of the external device, as follows. From the Start screen, type c, and then select
Control Panel from the list of applications. Select Appearance and Personalization. Under
Display, select Adjust screen resolution.
Using video 27 
						

							Setting up HDMI audio
HDMI is the only video interface that supports high-definition video and audio. After you connect an
HDMI TV to the computer, you can then turn on HDMI audio by following these steps:
1.From the Windows desktop, right-click the Speakers icon in the notification area, at the far right
of the taskbar, and then select Playback devices.
2.On the Playback tab, select the name of the digital output device.
3.Click Set Default, and then click OK.
To return the audio stream to the computer speakers:
1.From the Windows desktop, right-click the Speakers icon in the notification area, at the far right
of the taskbar, and then click Playback devices.
2.On the Playback tab, click Speakers / HP.
3.Click Set Default, and then click OK.
Connecting video devices wirelessly (select models only)
Intel Wireless Display allows you to transmit your computer content wirelessly to your receive/display
device, such as HDTV, monitor, projector, game console, Blu-ray player, or DVR, by using an
optional wireless adapter (purchased separately). For details about using the wireless adapter, see
the manufacturers instructions.
▲To open Intel Wireless Display, from the Start screen, type w, and then select Intel WiDi.
NOTE:Before using the wireless display feature, be sure that your wireless device is turned on.
Managing your audio and video files (select models only)
CyberLink PowerDVD helps you manage and edit your photo and video collections.
▲To open CyberLink PowerDVD, from the Start screen, type c, and then select CyberLink
PowerDVD.
For more information about using CyberLink PowerDVD, see the PowerDVD software Help.
28 Chapter 4   Enjoying entertainment features 
						

							5 Navigating the screen
You can navigate the computer screen in several ways:
●Touch gestures
●Keyboard and mouse
Touch gestures can be used on your computer TouchPad or on a touch screen (select models only).
NOTE:An external USB mouse (purchased separately) can be connected to one of the USB ports
on the computer.
Review the Windows 8 Basics guide included with your computer. The guide provides information on
common tasks using the TouchPad, touch screen, or the keyboard.
Select computer models have special action keys or hot key functions on the keyboard to perform
routine tasks.
Using the TouchPad
The TouchPad allows you to navigate the computer with simple finger movements.
You can customize the touch gestures by changing settings, button configurations, click speed, and
pointer options. From the Start screen, type c, select Control Panel, and then select Hardware and
Sound. Under Devices and Printers, select Mouse.
Using TouchPad gestures
A TouchPad allows you to control the pointer on the screen using your fingers.
TIP:Use the left and right buttons on the TouchPad as you would use the corresponding buttons on
an external mouse.
NOTE:TouchPad gestures are not supported in all apps.
To view a demonstration of each gesture:
1.From the Start screen, type c, select Control Panel, and then select Hardware and Sound.
2.Select Synaptics TouchPad.
3.Click a gesture to activate the demonstration.
To turn a gesture off or on:
1.From the Synaptics TouchPad screen, select or clear the check box next to the gesture that
you want to turn on or off.
2.Click Apply, and then click OK.
–or –
A TouchPad allows you to control the pointer on the screen using your fingers.
TIP:Use the left and right buttons on the TouchPad as you would use the corresponding buttons on
an external mouse.
Using the TouchPad 29 
						

							NOTE:TouchPad gestures are not supported in all apps, and only common gestures are
documented in this guide. More gestures are available when you choose to view a demonstration of
each gesture.
To view a demonstration of each gesture:
1.From the Start screen, type c, select Control Panel, and then select Hardware and Sound.
2.Select Touch Pad.
3.Click a gesture to activate the demonstration.
To turn a gesture off or on:
1.From the Start Screen, type c, select Control Panel, select Hardware and Sound, and then
select Touch Pad. The Mouse Properties dialog box opens.
2.From the Touch Pad tab, click Click to change the Touch Pad settings.
3.From the Touch Pad screen, select the appropriate gesture, and then select or clear the check
box next to the gesture that you want to turn off or on.
4.Click Save.
Tapping
To make an on-screen selection, use the tap function on the TouchPad.
●Point to an item on the screen, and then tap one finger on the TouchPad zone to make a
selection. Double-tap an item to open it.
30 Chapter 5   Navigating the screen