HP Pavilion G4 1100 Notebook Pc Series Service Guide

8 Power cord set requirements
The wide-range input feature of the computer permits it to operate from any line voltage from 100 to
120 volts AC, or from 220 to 240 volts AC
The 3-conductor power cord set included with the computer meets the requirements for use in
the country or region where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or
region where the computer is used.
Requirements for all countries
The following...

Requirements for specific countries and regions
Country/region Accredited agency Applicable note number
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland FIMKO 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan METI 3
The Netherlands KEMA 1
Norway NEMKO 1
The Peoples Republic of China COC 5
South Korea EK 4
Sweden SEMKO 1
Switzlerland SEV 1
Taiwan BSMI 4
The United Kingdom BSI 1
The United States UL 2
1.The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor...

9 Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general
household waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING!The backlight contains mercury. Caution must be exercised when removing and
handling the backlight to avoid damaging this component and causing exposure to the mercury.
CAUTION:The procedures in this chapter can result in damage to display components. The only
components...

Perform the following steps:
1.Remove all screw covers (1) and screws (2) that secure the display bezel to the display
assembly.
2.Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of
the display bezel until the bezel disengages from the display assembly.
3.Remove the display bezel 3.
116 Chapter 9   Recycling 

4.Disconnect all display panel cables (1) from the display inverter and remove the inverter 2.
5.Remove all screws (1) that secure the display panel assembly to the display enclosure.
6.Remove the display panel assembly (2) from the display enclosure.
7.Turn the display panel assembly upside down.
8.Remove all screws that secure the display panel frame to the display panel.
9.Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to
the display panel frame.
Display 117 

10.Remove the display panel frame (2) from the display panel.
11.Remove the screws (1) that secure the backlight cover to the display panel.
12.Lift the top edge of the backlight cover (2) and swing it outward.
13.Remove the backlight cover.
14.Turn the display panel right-side up.
118 Chapter 9   Recycling 

15.Remove the backlight cables (1) from the clip (2) in the display panel.
16.Turn the display panel upside down.
17.Remove the backlight frame from the display panel.
WARNING!The backlight contains mercury. Exercise caution when removing and handling
the backlight to avoid damaging this component and causing exposure to the mercury.
18.Remove the backlight from the backlight frame.
Display 119 

19.Disconnect the display cable (1) from the LCD panel.
20.Remove the screws (2) that secure the LCD panel to the display rear panel.
21.Release the LCD panel (3) from the display rear panel.
22.Release the tape (4) that secures the LCD panel to the display rear panel.
23.Remove the LCD panel.
24.Recycle the LCD panel and backlight.
120 Chapter 9   Recycling 

Index
A
AC adapter light 16
AC adapter, spare part numbers
32, 34
action keys 11
antenna
locations 9
removal 94
spare part number 29, 37, 94
Antenna Kit, spare part number
29, 37, 94
audio, product description 6
audio-in jack 14
audio-out jack 14
B
base enclosure, spare part
number 26, 36
battery
removal 48
spare part numbers 26, 33, 48
battery bay 17
battery release latch 17
Blu-ray ROM DVD±R/RW Super
Multi Double-Layer Drive
precautions 42
removal 49
spare part number 36
spare part numbers 26, 31,
40,...

F
fan
removal 79
spare part number 25, 37, 79
feet
locations 47
spare part number 26, 37, 47
fn key 11
front components 15
G
graphics, product description 3
grounding guidelines 42
guidelines
equipment 45
grounding 42
packaging 44
transporting 44
workstation 44
H
hard drive
precautions 42
product description 5
removal 51
spare part numbers 26, 30,
36, 38, 51
specifications 103
hard drive bay 17
hard drive cable
illustrated 28
removal 52
Hard Drive Hardware Kit, spare
part number 26, 31, 36, 51
hard drive...