HP Pavilion Dv7t 7000 Cto Select Edition Entertainment Notebook Pc Manual

Inserting and removing digital storage cards
To insert a digital storage card:
CAUTION:To reduce the risk of damage to the digital card connectors, use minimal force to insert
a digital card.
1.Hold the card label-side up, with the connectors facing the computer.
2.Insert the card into the digital storage slot, and then press in on the card until it is firmly seated.
A sound indicates that the device has been detected, and a menu of options displays.
To remove a digital storage card:
CAUTION:To reduce...

Using optical drives
An optical disc drive uses laser light to read or store large amounts of information. Some drives can
only read information, but others can also write (burn) information onto a blank disc.
Use these tips for best performance of your optical drive:
●When the battery is the only source of power, be sure the battery is sufficiently charged before
writing to media.
●Do not type on the keyboard or move the computer while an optical drive is writing to a disc. The
write process is...

such a BD movie release is inserted in the drive. Follow the on-screen instructions to install the
update.
●If lines appear on the display when viewing a BD, they may be caused by interference from the
wireless network. To resolve the issue, close any open applications and turn off your wireless
feature.
Inserting an optical disc
1.Turn on the computer.
2.Press the release button (1) on the drive bezel to release the disc tray.
3.Pull out the tray (2).
4.Hold the disc by the edges to avoid touching the...

2.Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE:If the tray is not fully accessible, tilt the disc carefully as you remove it.
3.Close the disc tray and place the disc in a protective case.
If the disc tray does not open normally, see 
Disc drive problems on page 84.
Sharing drives on the network
You can access software and data and install applications by sharing...

8 Maintaining your computer
It is important to perform regular maintenance to keep your computer in optimal condition. This
chapter provides information about improving the performance of your computer by running tools
such as Disk Defragmenter and Disk Cleanup and by replacing a hard drive or adding memory. It also
provides information about updating your programs and drivers, instructions for cleaning your
computer, and tips for travelling with your computer.
Improving performance
Everyone wants a fast...

●Do not type on the keyboard or move the computer while an optical drive is writing to a disc. The
write process is sensitive to vibration.
●Before you move a computer that is connected to an external hard drive, initiate Sleep and allow
the screen to clear, or properly disconnect the external hard drive.
Replacing a hard drive
CAUTION:Drives are fragile computer components that must be handled with care. Do not drop a
drive, place items on it, or expose it to liquids, or temperature or humidity...

4.Slide the hard drive tab (3) to the left, and then lift the hard drive out of the hard drive bay.
NOTE:After removing the hard drive from the computer, you must remove the hard drive
bracket to access the hard drive itself.
5.Remove the 2 screws (1) from the hard drive bracket.
6.Remove the hard drive bracket (2) from the hard drive.
7.Disconnect the hard drive cable (3) from the hard drive.
To install a hard drive, reverse this procedure.
NOTE:When installing the second hard drive, carefully insert...

Using HP 3D DriveGuard
HP 3D DriveGuard protects a hard drive by parking the drive and halting data requests under either of
the following conditions:
●You drop the computer.
●You move the computer with the display closed while the computer is running on battery power.
A short time after the end of one of these events, HP 3D DriveGuard returns the hard drive to normal
operation.
NOTE:Because solid-state drives (SSD) lack moving parts, HP 3D DriveGuard is unnecessary.
NOTE:Hard drives in the primary hard...

Adding or replacing memory modules
Adding memory can help improve your computers performance. Your computer is like your physical
work area. The hard drive is the filing cabinet where you store your work and the memory is the desk
where you work. When your memory isn’t big enough to hold all your work easily, like a desk
overflowing with work, your productivity slows down. A great solution to improve performance is to
expand the amount of memory you have in your computer.
The computer has two memory...

b.Grasp the edge of the memory module (2), and then gently pull the module out of the
memory module slot.
CAUTION:To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
8.Insert a new memory module:
CAUTION:To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module....