HP Pavilion Dv7t 6c00 Cto Quad Edition Entertainment Notebook Pc Manual

							Using the keyboard
Using the action keys
An action key performs an assigned function. The icon on each of the f1 through f4 keys and f6
through f12 keys illustrates the assigned function for that key.
To use an action key function, press and hold the key.
The action key feature is enabled at the factory. You can disable this feature in Setup Utility (BIOS)
and revert back to standard settings by pressing the fn key and an action key to activate the assigned
function. Refer to 
Using Setup Utility (BIOS) on page 84 for instructions.
CAUTION:Use extreme care when making changes in Setup Utility. Errors can prevent the
computer from operating properly.
Icon Key Description
f1Opens Help and Support, which provides tutorials, information about your Windows
operating system and computer, answers to questions, and updates to your computer.
Help and Support also provides automated troubleshooting tools and access to
customer support.
f2Decreases the screen brightness level incrementally as long as you hold down the
key.
f3Increases the screen brightness level incrementally as long as you hold down the key.
f4Switches the screen image among display devices connected to the system. For
example, if a monitor is connected to the computer, pressing this key alternates the
screen image from the computer display to the monitor display to a simultaneous
display on both the computer and the monitor.
Most external monitors receive video information from the computer using the external
VGA video standard. This action key can also alternate images among other devices
that are receiving video information from the computer.
f6Plays the previous track of an audio CD or the previous section of a DVD or a BD.
f7Plays, pauses, or resumes a track of an audio CD or a section of a DVD or a BD.
f8Plays the next track of an audio CD or the next section of a DVD or a BD.
f9Decreases speaker volume incrementally as long as you hold down the key.
f10Increases speaker volume incrementally as long as you hold down the key.
Using the keyboard 31 
						

							Icon Key Description
f11Mutes or restores speaker sound.
f12Turns the wireless feature on or off.
NOTE:A wireless network must be set up before a wireless connection is possible.
Using the hotkeys
A hotkey is a combination of the fn key (1) and either the esc key (2), the b key (3), or the spacebar
(4).
To use a hotkey:
▲Briefly press the fn key, and then briefly press the second key of the hotkey combination.
Function Hotkey Description
Display system information.fn+escDisplays information about system hardware components and the
system BIOS version number.
Control the bass settings.fn+bEnables or disables the Beats Audio bass settings (select models
only).
Beats Audio is an enhanced audio profile that provides a deep,
controlled bass while maintaining a clear sound. Beats Audio is
enabled by default.
You can also view and control the bass settings through the Windows
operating system. To view and control the bass properties:
Select Start > Control Panel > Hardware and Sound > Beats
Audio Control Panel.
Turn the TouchPad accent
light on or off.fn+spacebarTurns the TouchPad accent light on or off when the TouchPad is on.
NOTE:The TouchPad accent light is turned on at the factory. To
extend battery life, turn off the TouchPad accent light.
32 Chapter 5   Pointing devices and keyboard 
						

							Using keypad
The computer includes an integrated numeric keypad. The computer also supports an optional
external numeric keypad or an optional external keyboard that includes a numeric keypad.
Using the integrated numeric keypad
Component Description
(1)num lock key Alternates between the navigational and numeric functions on the
integrated numeric keypad.
NOTE:The keypad function that is active when the computer is
turned off is reinstated when the computer is turned back on.
(2)Integrated numeric keypad Can be used like an external numeric keypad.
Using an optional external numeric keypad
Keys on most external numeric keypads function differently according to whether num lock is on or
off. (Num lock is turned off at the factory.) For example:
●When num lock is on, most keypad keys type numbers.
●When num lock is off, most keypad keys function like the arrow, page up, or page down keys.
To turn num lock on or off on an external keypad as you work:
▲Press the num lock key on the external keypad, not on the computer.
Using the keyboard 33 
						

							6 Multimedia and other features
Your computer includes the following:
●Four integrated speakers and a subwoofer
●Two integrated microphones
●Integrated webcam
●Preinstalled multimedia software
●Multimedia keys
Using the media activity controls
Your computer has media action keys that allow you to play, pause, fast forward, or rewind a media
file. Refer to 
Using the action keys on page 31 for information about your computers media activity
controls.
Audio
Your computer provides a variety of audio-related opportunities:
●Play music.
●Record sound.
●Download music from the Internet.
●Create multimedia presentations.
●Transmit sound and images with instant messaging programs.
●Stream radio programs.
●Create (burn) audio CDs using the installed optical drive (select models only) or on an optional
external optical drive (purchased separately).
34 Chapter 6   Multimedia and other features 
						

							Adjusting the volume
You can adjust the volume using the volume keys. Refer to Using the action keys on page 31 for
more information.
WARNING!To reduce the risk of personal injury, adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information, refer to the Regulatory, Safety and
Environmental Notices.
NOTE:Volume can also be controlled through the operating system and some programs.
Checking audio functions on the computer
NOTE:For best results when recording, speak directly into the microphone and record sound in a
setting free of background noise.
To check the audio functions on your computer, follow these steps:
1.Select Start > Control Panel > Hardware and Sound > Sound.
2.When the Sound window opens, click the Sounds tab. Under Program Events, select any sound
event, such as a beep or alarm, and click the Test button.
You should hear sound through the speakers or through connected headphones.
To check the recording functions on your computer, follow these steps:
1.Select Start > All Programs > Accessories > Sound Recorder.
2.Click Start Recording and speak into the microphone. Save the file to your desktop.
3.Open a multimedia program and play back the sound.
To confirm or change the audio settings on your computer, select Start > Control Panel > Hardware
and Sound > Sound.
Audio 35 
						

							Using Beats Audio (select models only)
Beats Audio is an enhanced audio profile that provides a deep, controlled bass while maintaining a
clear sound. Beats Audio is enabled by default.
To enable or disable the Beats Audio bass settings:
●Press fn+b.
– or –
●Select Start > Control Panel > Hardware and Sound > Beats Audio Control Panel.
The following table shows and describes the Beats Audio icons.
Icon Description
Beats Audio is enabled.
Beats Audio is disabled.
Webcam (select models only)
Some computers include an integrated webcam, located at the top of the display. With the
preinstalled software, you can use the webcam to take a photo or record a video. You can preview
and save the photo or video recording.
The webcam software enables you to experiment with the following features:
●Capturing and sharing video
●Streaming video with instant message software
●Taking still photos
To access the webcam, select Start > All Programs > Communication and Chat > CyberLink
YouCam.
For information on using the webcam, select Start > Help and Support.
36 Chapter 6   Multimedia and other features 
						

							Video
Your computer has the following external video ports:
●VGA
●HDMI
VGA
The external monitor port, or VGA port, is an analog display interface that connects an external VGA
display device such as an external VGA monitor or a VGA projector to the computer.
▲To connect a VGA display device, connect the device cable to the external monitor port.
NOTE:For more information on switching the screen image, refer to Using the action keys
on page 31.
Video 37 
						

							HDMI
The HDMI (High Definition Multimedia Interface) port connects the computer to an optional video or
audio device, such as a high-definition television, or to any compatible digital or audio component.
NOTE:To transmit video and/or audio signals through the HDMI port, you need an HDMI cable
(purchased separately).
One HDMI device can be connected to the HDMI port on the computer. The information displayed on
the computer screen can be simultaneously displayed on the HDMI device.
To connect a video or audio device to the HDMI port:
1.Connect one end of the HDMI cable to the HDMI port on the computer.
2.Connect the other end of the cable to the video device, and then refer to the device
manufacturer’s instructions for additional information.
NOTE:For more information on switching the screen image, refer to Using the action keys
on page 31.
Configuring audio for HDMI
To configure HDMI audio, first connect an audio or video device, such as a high-definition TV, to the
HDMI port on your computer. Then configure the default audio playback device as follows:
1.Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then
click Playback devices.
2.On the Playback tab, click either Digital Output or Digital Output Device (HDMI).
3.Click Set Default, and then click OK.
To return audio to the computer speakers, follow these steps:
1.Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then
click Playback devices.
2.On the Playback tab, click Speakers.
3.Click Set Default, and then click OK.
38 Chapter 6   Multimedia and other features 
						

							Intel Wireless Display (select models only)
Intel® Wireless Display allows you to share your computer content wirelessly on your TV. To
experience wireless display, a wireless TV adapter (purchased separately) and an Intel graphics card
are required. For details about using the wireless TV adapter, refer to the manufacturers instructions.
NOTE:Be sure that wireless is enabled on your computer before using the wireless display.
Using CyberLink PowerDVD (select models only)
CyberLink PowerDVD turns your computer into a mobile entertainment center. With CyberLink
PowerDVD, you can enjoy music CDs and DVD and Blu-ray Disc (BD) movies. You can also manage
and edit your photo collections.
▲To start CyberLink PowerDVD, select Start > All Programs > Music, Photos and Videos, and
then click CyberLink PowerDVD 10.
For more information on using CyberLink PowerDVD, refer to the PowerDVD software Help.
Using CyberLink PowerDVD (select models only) 39 
						

							7 Power management
Inserting or removing the battery
NOTE:For additional information on using the battery, refer to Using battery power on page 46.
Inserting the battery
1.Insert the battery (1) into the battery bay.
2.Pivot the battery (2) downward until it is seated. The battery release latch (3) automatically locks
the battery into place.
40 Chapter 7   Power management