HP Pavilion Dv7t 4100 Cto Select Edition Entertainment Notebook Pc Manual

							ItemDescriptionFunction
1Power cord*Connects an AC adapter to an AC outlet.
2AC adapterConverts AC power to DC power.
3 Battery* Provides power when the computer is not connected to an external
power source.
* Batteries and power cords vary in appearance by region and country.
Components 11 
						

							Labels
The labels affixed to the computer provide information needed when troubleshooting system problems
or traveling internationally with the computer.
●Service tag—Provides important information including:
The service tag label is affixed to the bottom of the computer. When contacting technical support,
have this information available.
ItemDescriptionFunction
1Serial number (s/n)An alphanumeric identifier that is
unique to each product.
2Product nameThe name affixed to the front of the
computer.
3 Warranty period The duration (in years) of the warranty
period for this computer.
●Microsoft Certificate of Authenticity—Contains the Windows Product Key. You might need the
Product Key to update or troubleshoot the operating system. This certificate is affixed to the bottom
of the computer.
●Regulatory label—Provides regulatory information about the computer. The regulatory label is
affixed inside the battery bay.
●Modem approval label—Provides regulatory information about the modem and lists the agency
approval markings required by some countries or regions where the modem has been approved
for use. You might need this information when traveling internationally. The modem approval label
is affixed inside the hard drive bay.
●Wireless certification label(s) (select models only)—Provides information about optional wireless
devices and the approval markings of some of the countries or regions where the devices have
been approved for use. An optional device might be a wireless local area network (WLAN) device
or an optional Bluetooth device. If the computer model includes one or more wireless devices, one
or more certification labels are included with the computer. You might need this information when
traveling internationally. Wireless certification labels are affixed inside the Mini Card
compartment.
●SIM (subscriber identity module) label (select models only)—Provides the ICCID (Integrated Circuit
Card Identifier) of the SIM. This label is located inside the battery bay.
●HP Mobile Broadband Module serial number label (select models only)—Provides the serial
number of the HP Mobile Broadband Module. This label is located inside the battery bay.
12 Chapter 1   Features 
						

							2 Wireless, local area network, and
modem
Using wireless devices
Wireless technology transfers data across radio waves instead of wires. The computer might be
equipped with one or more of the following wireless devices:
●Wireless local area network (WLAN) device—Connects the computer to wireless local area
networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices,
your home, and public places such as airports, restaurants, coffee shops, hotels, and universities.
In a WLAN, each mobile wireless device communicates with a wireless router or a wireless access
point.
●Bluetooth device (select models only)—Creates a personal area network (PAN) to connect to other
Bluetooth-enabled devices such as computers, phones, printers, headsets, speakers, and
cameras. In a PAN, each device communicates directly with other devices, and devices must be
relatively close together—typically within 10 meters (approximately 33 feet) of each other.
Computers with WLAN devices support one or more of the following IEEE industry standards:
●802.11b, the first popular standard, supports data rates of up to 11 Mbps and operates at a
frequency of 2.4 GHz.
●802.11g supports data rates of up to 54 Mbps and operates at a frequency of 2.4 GHz. An 802.11g
WLAN device is backward compatible with 802.11b devices, so that they can operate on the same
network.
●802.11a supports data rates of up to 54 Mbps and operates at a frequency of 5 GHz.
NOTE:802.11a is not compatible with 802.11b and 802.11g.
●802.11n supports data rates of up to 450 Mbps and might operate at 2.4 GHz or 5 GHz, making it
backward compatible with 802.11a, b, and g.
For more information on wireless technology, see the information and website links provided in Help
and Support.
Identifying wireless and network status icons
Icon Name Description
Using wireless devices 13 
						

							Wireless (connected)Identifies the location of the wireless light and the wireless key on
the computer. Also identifies the HP Wireless Assistant software on
the computer and indicates that one or more of the wireless devices
are on.
Wireless (disconnected)Identifies the HP Wireless Assistant software on the computer and
indicates that all of the wireless devices are off.
Wired network (connected)Indicates that one or more network drivers are installed, and one or
more network devices are connected to a wired network.
Wired network (disabled/
disconnected)Indicates that one or more network drivers are installed, but no
network devices are connected (or all network devices are disabled
in Windows Control Panel).
Network (connected)Indicates that one or more network drivers are installed, and one or
more network devices are connected to a wireless network.
Network (disconnected)Indicates that one or more network drivers are installed and wireless
connections are available, but no network devices are connected to
a wireless network.
Network (disabled/
disconnected)Indicates that one or more network drivers are installed, but no
wireless connections are available (or all wireless network devices
are disabled by the wireless key or HP Wireless Assistant).
Using the wireless controls
Control the wireless devices on the computer using:
●Wireless action key or hotkey (fn+f12)
●HP Wireless Assistant software
●HP Connection Manager software (select models only)
●Operating system controls
Using the wireless key
The computer has a wireless key, one or more wireless devices, and one or two wireless lights,
depending on the model. All of the wireless devices on the computer are enabled at the factory, so the
wireless light illuminates white when you turn on the computer.
The wireless light indicates the overall power state of your wireless devices, not the status of individual
devices. If the wireless light illuminates white, at least one wireless device is on. If the wireless light
illuminates amber, all wireless devices are off.
Because the wireless devices are enabled at the factory, use the wireless key to turn on or turn off the
wireless devices simultaneously. Individual wireless devices are controlled through HP Wireless
Assistant.
14 Chapter 2   Wireless, local area network, and modem 
						

							Using HP Wireless Assistant
A wireless device is turned on or off using HP Wireless Assistant. If a wireless device is disabled by
Setup Utility, it must be re-enabled by Setup Utility before it can be turned on or off using Wireless
Assistant.
NOTE:Enabling or turning on a wireless device does not automatically connect the computer to a
network or a Bluetooth-enabled device.
To view the state of the wireless devices, click the Show hidden icons icon, the arrow at the left of the
notification area, and position the mouse pointer over the wireless icon.
If the wireless icon is not displayed in the notification area:
1.Select Start > Control Panel > Hardware and Sound > Windows Mobility Center.
2.Click the Wireless icon in the Wireless Assistant tile, which is located in the bottom row of Windows
Mobility Center. Wireless Assistant appears.
3.Click Properties.
4.Select the check box next to HP Wireless Assistant icon in notification area.
5.Click Apply.
6.Click Close.
For more information, see the Wireless Assistant software Help. To access Help:
1.Open Wireless Assistant by clicking the Wireless icon in Windows Mobility Center.
2.Click the Help button.
Using operating system controls
Some operating systems offer a way to manage integrated wireless devices and the wireless connection.
For example, Windows provides the Network and Sharing Center that allows you to set up a connection
or network, connect to a network, manage wireless networks, and diagnose and repair network
problems.
To access the Network and Sharing Center, select Start > Control Panel > Network and Internet >
Network and Sharing Center.
For more information, select Start > Help and Support.
Using a WLAN
With a WLAN device, you can access a wireless local area network (WLAN), which is composed of other
computers and accessories that are linked by a wireless router or a wireless access point.
Using a WLAN 15 
						

							NOTE:The terms wireless router and wireless access point are often used interchangeably.
●A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points
that accommodate a large number of computers and accessories and can separate critical network
functions.
●A home or small office WLAN uses a wireless router, which allows several wireless and wired
computers to share an Internet connection, a printer, and files without requiring additional pieces
of hardware or software.
To use the WLAN device in the computer, connect to a WLAN infrastructure (provided through a service
provider or a public or corporate network).
Setting up a WLAN
To set up a WLAN and connect to the Internet, you need:
●A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an
Internet service provider (ISP)
●A wireless router (purchased separately) (2)
●The wireless computer (3)
The illustration below shows an example of a wireless network installation that is connected to the
Internet.
As your network grows, additional wireless and wired computers can be connected to the network to
access the Internet.
For help in setting up your WLAN, see the information provided by your router manufacturer or your
ISP.
Protecting your WLAN
Because the WLAN standard was designed with only limited security capabilities—basically to foil casual
eavesdropping rather than more powerful forms of attack—it is essential to understand that WLANs are
vulnerable to well-known and well-documented security weaknesses.
WLANs in public areas, or “hotspots,” like coffee shops and airports might not provide any security. New
technologies are being developed by wireless manufacturers and hotspot service providers that make
the public environment more secure and anonymous. If you are concerned about the security of the
computer in a hotspot, limit your network activities to noncritical e-mail and basic Internet surfing.
When setting up a WLAN or access an existing WLAN, always enable security features to protect your
network from unauthorized access. The common security levels are Wi-Fi Protected Access (WPA)-
Personal and Wired Equivalent Privacy (WEP). Because wireless radio signals travel outside the
16 Chapter 2   Wireless, local area network, and modem 
						

							network, other WLAN devices can pick up unprotected signals and either connect to your network
(uninvited) or capture information being sent across it. To protect the WLAN:
●Use a wireless transmitter with built-in security
Many wireless base stations, gateways, or routers provide built-in security features such as
wireless security protocols and firewalls. With the correct wireless transmitter, you can protect your
network from the most common wireless security risks.
●Work behind a firewall
A firewall is a barrier that checks both data and requests that are sent to the network, and discards
any suspicious items. Firewalls are available in many varieties, both software and hardware. Some
networks use a combination of both types.
●Use wireless encryption
A variety of sophisticated encryption protocols is available for your WLAN. Find the solution that
works best for your network security:
◦Wired Equivalent Privacy (WEP) is a wireless security protocol that encodes or encrypts all
network data before it is transmitted using a WEP key. The network assigns the WEP key,
but you can set up your own key, generate a different key, or choose other advanced options.
Without the correct key, others cannot access the WLAN.
◦WPA (Wi-Fi Protected Access), like WEP, uses security settings to encrypt and decrypt data
that is transmitted over the network. However, instead of using one static security key for
encryptions as WEP does, WPA uses “temporal key integrity protocol” (TKIP) to dynamically
generate a new key for every packet. It also generates different sets of keys for each computer
on the network.
Connecting to a WLAN
To connect to the WLAN:
1.Be sure that the WLAN device is on. If it is on, the wireless light is illuminated white. If the wireless
light is off, press the wireless key.
NOTE:On some models, the wireless light is amber when all wireless devices are off.
2.Click the Network icon in the notification area at the far right of the taskbar.
3.Select your WLAN from the list.
4.Click Connect.
NOTE:If no WLANs are listed, you are out of range of a wireless router or access point.
●If the network is a security-enabled WLAN, enter a network security key at the prompt, which
is a security code, and then click OK to complete the connection.
●If you do not see the network you want to connect to, click Open Network and Sharing
Center, and then click Set up a new connection or network. A list of options appears.
Search for and connect to a network or to create a new network connection.
After the connection is made, place the mouse pointer over the Network icon in the notification area to
verify the name and status of the connection.
Using a WLAN 17 
						

							NOTE:The functional range (how far your wireless signals travel) depends on WLAN implementation,
router manufacturer, and interference from other electronic devices or structural barriers such as walls
and floors.
More information about using a WLAN is available through:
●Your ISP and the user guides included with the wireless router and other WLAN equipment
●Help and Support information and website links
For a list of public WLANs near you, contact your ISP or search the Web. Websites that list public WLANs
include Cisco Internet Mobile Office Wireless Locations, Hotspotlist, and Geektools. Check with each
public WLAN location for cost and connection requirements.
Roaming to another network
When you move the computer within range of another WLAN, Windows attempts to connect to that
network. If the attempt is successful, the computer is automatically connected to the new network. If
Windows does not recognize the new network, follow the instructions in “Connecting to a WLAN.”
18 Chapter 2   Wireless, local area network, and modem 
						

							Using Bluetooth wireless devices (select models only)
A Bluetooth device provides short-range wireless communications that replace the physical cable
connections that traditionally link electronic devices such as:
●Computers (desktop, notebook, PDA)
●Phones (cellular, cordless, smart phone)
●Imaging devices (printer, camera)
●Audio devices (headset, speakers)
Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network
(PAN) of Bluetooth devices. For information on configuring and using Bluetooth devices, see the
Bluetooth software Help.
Bluetooth and Internet Connection Sharing (ICS)
HP does not recommend setting up a host, Bluetooth computer and using it as a gateway through which
other computers connect to the Internet. When two or more computers are connected using Bluetooth,
and Internet Connection Sharing (ICS) is enabled on one of the computers, the other computers cannot
connect to the Internet using the Bluetooth network.
The strength of Bluetooth is in synchronizing information transfers between the computer and wireless
devices including cellular phones, printers, cameras, and PDAs. The inability to consistently connect
two or more computers to share the Internet through Bluetooth is a limitation of Bluetooth and the
Windows operating system.
Using Bluetooth wireless devices (select models only) 19 
						

							Connecting to a local area network
Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased
separately). If the network cable contains noise suppression circuitry (1), which prevents interference
from TV and radio reception, orient the circuitry end of the cable (2) toward the computer.
WARNING!To reduce the risk of electric shock, fire, or damage to the equipment, do not connect a
modem or telephone cable to the RJ-45 (network) jack.
To connect the network cable:
1.Connect the network cable to the network jack (1) on the computer.
2.Connect the other end of the cable to a network wall jack (2).
20 Chapter 2   Wireless, local area network, and modem