HP Pavilion Dv7 4200 Entertainment Notebook Pc Series Manual

							Improving hard drive performance
Using Disk Defragmenter
As you use the computer, files on the hard drive become fragmented. Disk Defragmenter consolidates
the fragmented files and folders on the hard drive so that the system runs more efficiently.
After starting Disk Defragmenter, it works without supervision. Depending on the size of the hard drive
and the number of fragmented files, Disk Defragmenter might take more than an hour to complete. Set
it to run during the night or another time when you do not need access to the computer.
HP recommends defragmenting the hard drive at least once a month. Set Disk Defragmenter to run on
a monthly schedule, but the computer can be defragmented manually at any time.
To run Disk Defragmenter:
1.Select Start > All Programs > Accessories > System Tools > Disk Defragmenter.
2.Click Defragment disk.
NOTE:Windows includes the User Account Control feature to improve the security of the
computer. You might be prompted for your permission or password for tasks such as installing
software, running utilities, or changing Windows settings. For more information, see Help and
Support.
For more information, see the Disk Defragmenter software Help.
Using Disk Cleanup
Disk Cleanup searches the hard drive for unnecessary files that, when safely deleted, free up disk space
and help the computer to run more efficiently.
To run Disk Cleanup:
1.Select Start > All Programs > Accessories > System Tools > Disk Cleanup.
2.Follow the on-screen instructions.
Improving hard drive performance 61 
						

							Replacing a drive in the primary hard drive bay
CAUTION:To prevent information loss or an unresponsive system:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on or in Sleep or Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn on the computer by pressing the
Power button, and then shut down the computer through the operating system.
NOTE:The cover of the primary hard drive bay is marked with a “1” and the cover of the secondary
hard drive bay is marked with a “2.”
To remove the primary hard drive:
1.Save your work.
2.Shut down the computer and close the display.
3.Disconnect all external hardware devices connected to the computer.
4.Disconnect the power cord from the AC outlet.
5.Turn the computer upside down on a flat surface, with the hard drive bay toward you.
6.Remove the battery from the computer.
7.Remove the five hard drive cover screws (1).
8.Lift the hard drive cover away from the computer (2).
9.Remove the four hard drive screws (1).
62 Chapter 6   Drives 
						

							10.Disconnect the hard drive by sliding it to the left (2), and then remove the hard drive (3) from the
computer.
To install the primary hard drive:
1.Insert the hard drive into the hard drive bay (1).
2.Connect the hard drive by sliding it to the right (2)
3.Insert the four hard drive screws (3).
4.Align the tabs on the hard drive cover with the notches on the computer (1).
5.Close the cover (2).
Replacing a drive in the primary hard drive bay 63 
						

							6.Tighten the hard drive cover screws (3).
7.Replace the battery.
8.Turn over the computer.
9.Connect external devices to the computer.
10.Connect the computer to AC power.
11.Turn on the computer.
64 Chapter 6   Drives 
						

							Replacing a drive in the secondary hard drive bay
CAUTION:To prevent information loss or an unresponsive system:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on or in Sleep or Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn on the computer by pressing the
Power button, and then shut down the computer through the operating system.
NOTE:The cover of the primary hard drive bay is marked with a “1” and the cover of the secondary
hard drive bay is marked with a “2.”
The computer is equipped with a secondary hard drive bay. This bay might be empty or occupied by a
secondary hard drive.
To remove the secondary hard drive:
1.Save your work.
2.Shut down the computer and close the display.
3.Disconnect all external hardware devices connected to the computer.
4.Disconnect the power cord from the AC outlet.
5.Turn the computer upside down on a flat surface, with the hard drive bay toward you.
6.Remove the battery from the computer.
7.Remove the five hard drive cover screws (1).
8.Lift the hard drive cover away from the computer (2).
9.Remove the four hard drive screws (1).
Replacing a drive in the secondary hard drive bay 65 
						

							10.Disconnect the hard drive by sliding it to the left (2), and then remove the hard drive (3) from the
computer.
To install the secondary hard drive:
1.Insert the hard drive into the hard drive bay (1).
2.Connect the hard drive by sliding it to the right (2)
3.Insert the four hard drive screws (3).
66 Chapter 6   Drives 
						

							4.Align the tabs on the hard drive cover with the notches on the computer (1).
5.Close the cover (2).
6.Tighten the hard drive cover screws (3).
7.Replace the battery.
8.Turn over the computer
9.Connect external devices to the computer.
10.Connect the computer to AC power.
11.Turn on the computer.
Replacing a drive in the secondary hard drive bay 67 
						

							7 External devices
Using a USB device
A USB port connects an optional external device, such as a USB keyboard, mouse, drive, printer,
scanner, or hub, to the computer or to an optional expansion product.
Some USB devices might require additional support software, which is usually included with the device.
For more information about device-specific software, see the manufacturers instructions.
The computer has 3 USB ports, which support USB 1.0, USB 1.1, and USB 2.0 devices. To add more
USB ports, connect an optional hub or optional expansion product.
Connecting a USB device
CAUTION:To prevent damage to a USB connector, use minimal force to connect a USB device.
To connect a USB device to the computer, connect the USB cable for the device to the USB port.
A sound alerts you when the USB device is detected.
NOTE:The first time a USB device is connected, the Installing device driver software message
displays in the notification area at the far right of the taskbar.
Removing a USB device
CAUTION:To prevent loss of information or an unresponsive system, adhere to the instructions in
“Removing a USB device.”
CAUTION:To prevent damage to a USB connector, do not pull on the cable to remove the USB device.
68 Chapter 7   External devices 
						

							To remove a USB device:
1.Click the Safely Remove Hardware and Eject Media icon in the notification area at the far right
of the taskbar.
To display the Safely Remove Hardware and Eject Media icon, click the Show hidden icons icon,
which is the arrow at the left of the notification area.
2.Click the name of the device in the list.
You are prompted that it is safe to remove the device.
3.Remove the device.
Using an eSATA device
An eSATA port connects an optional high-performance eSATA component, such as an eSATA external
hard drive.
Some eSATA devices might require additional support software, which is usually included with the
device. For more information about device-specific software, see the software manufacturers
instructions. These instructions are provided with the software, on disk, in the software Help, or on the
manufacturers website.
NOTE:The eSATA port also supports an optional USB device.
Connecting an eSATA device
CAUTION:To prevent damage to an eSATA port connector, use minimal force to connect an eSATA
device.
To connect an eSATA device to the computer, connect the eSATA cable for the device to the eSATA
port.
A sounds alerts you that the device is connected to the computer.
Removing an eSATA device
CAUTION:To prevent loss of information or an unresponsive system, adhere to the instructions in
“Removing an eSATA device.”
Using an eSATA device 69 
						

							CAUTION:To prevent damage to an eSATA connector, do not pull on the cable to remove the eSATA
device.
To remove an eSATA device:
1.Click the Safely Remove Hardware and Eject Media icon in the notification area at the far right
of the taskbar.
To display the Safely Remove Hardware and Eject Media icon, click the Show hidden icons icon,
which is the arrow at the left of the notification area.
2.Click the name of the device in the list.
You are prompted that it is safe to remove the device.
3.Remove the device.
70 Chapter 7   External devices