HP Pavilion Dv7 1200 Entertainment Notebook Pc Series Manual

Keyboard
For use in country or regionSpare part numberFor use in country or regionSpare part number
For use with all computer models:
Denmark, Norway, and Sweden
483275-DH1Saudi Arabia483275-171
France483275-051Spain483275-071
French Canada483275-121Switzerland483275-111
Germany483275-041Turkey483275-141
Italy483275-061The United Kingdom483275-031
The Netherlands483275-B31The United States483275-001
Portugal483275-131 
For use only with computer models equipped with AMD processors:
Asia Pacific countries...

Remove the keyboard:
1.Turn the computer upside down, with the front toward you.
2.Remove the Phillips PM2.5×13.0 screw that secures the keyboard to the computer.
3.Turn the computer display-side up, with the front toward you.
4.Open the computer as far as possible.
5.Remove the three Phillips PM2.0×4.0 screws (1) and the Phillips PM2.0×3.0 broad-head
screw (2) that secure the keyboard to the computer.
6.Lift the rear edge of the keyboard (1) until it rests at an angle.
72 Chapter 4   Removal and...

7.Slide the keyboard (2) back to disengage the tabs on the front edge of the keyboard from the top
cover and rest it on the display.
8.Release the ZIF connector (1) to which the keyboard cable is attached and disconnect the keyboard
cable (2).
9.Remove the keyboard.
Reverse this procedure to install the keyboard.
Component replacement procedures 73 

Bluetooth module
NOTE:The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 480474-001.
DescriptionSpare part number
Bluetooth module483113-001
Before removing the Bluetooth module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.Disconnect all external devices...

Speaker assembly
DescriptionSpare part number
Speaker assembly480470-001
Before removing the speaker assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer....

Display assembly
NOTE:All display assembly spare part include a webcam, microphone, and wireless antenna
transceivers and cables.
  
17.0-inch WSXGA+ AntiGlare display assembly for use only with computer models equipped with
AMD processors497104-001
17.0-inch WXGA AntiGlare display assembly for use only with computer models equipped with
AMD processors497103-001
17.0-inch WSXGA+ BrightView display assembly with webcam and 2 microphones for use only
with computer models equipped with AMD...

2.Remove the wireless antenna cables (2) from the routing channels in the top cover.
CAUTION:The display assembly will be unsupported when the following screws are removed.
To prevent damage to the display assembly, support it before removing the screws.
3.Remove the three Phillips PM2.5×13.0 screws (1) and the three Phillips PM2.5×6.0 screws (2) that
secure the display assembly to the computer.
4.Remove the display assembly (3).
NOTE:Steps 5 through 24 provide display assembly internal component removal...

6.Remove the two Phillips PM2.5×5.0 screws (2) that secure the display enclosure to the
display assembly.
7.Turn the display enclosure upside down, with the hinges toward you.
8.Release the display enclosure (1) by sliding it toward the top of the display assembly until it
detaches from the display assembly.
9.Lift the bottom edge of the display enclosure (2) until the display enclosure logo LED cable
is accessible.
10.Disconnect the display enclosure logo LED cable (3) from the display panel cable....

14.Disconnect the webcam/microphone module cable (3) from the webcam/microphone module.
15.Remove the webcam/microphone module. The webcam/microphone module is available using
spare part number 480446-001.
16.If it is necessary to replace the display inverter, remove the 7 Phillips PM2.5×5.0 screws (1) that
secure the display inverter cover to the display bezel.
17.Remove the display inverter cover (2) by lifting it straight up. The display inverter cover is available
using spare part number 485606-001....

20.Disconnect the display panel cable (3) and the backlight cable (4) from the display inverter.
21.Remove the display inverter. The display inverter is available using spare part number
480447-001.
22.If it is necessary to replace the display hinges, remove the two Phillips PM2.5×5.0 screws (1) and
the four Phillips PM2.5×4.0 screws (2) that secure the display hinges to the display panel.
23.Remove the eight Phillips PM2.0×4.0 screws (1) that secure the display hinges to the display panel.
80 Chapter 4...