HP Pavilion Dv6t 7000 Cto Quad Edition Entertainment Notebook Pc Manual

							Setting up a WLAN
To set up a WLAN and connect to the Internet, you need the following equipment:
●A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from
an Internet service provider
●A wireless router (2) (purchased separately)
●A wireless computer (3)
NOTE:Some modems have a built-in wireless router. Check with your ISP to determine what type
of modem you have.
The illustration below shows an example of a wireless network installation that is connected to the
Internet.
As your network grows, additional wireless and wired computers can be connected to the network to
access the Internet.
For help in setting up your WLAN, see the information provided by your router manufacturer or your
ISP.
Configuring a wireless router
For help in setting up a WLAN, see the information provided by your router manufacturer or your ISP.
NOTE:It is recommended that you initially connect your new wireless computer to the router by
using the network cable provided with the router. When the computer successfully connects to the
Internet, disconnect the cable, and access the Internet through your wireless network.
Protecting your WLAN
When you set up a WLAN or access an existing WLAN, always enable security features to protect
your network from unauthorized access. WLANs in public areas (hotspots) like coffee shops and
airports may not provide any security. If you are concerned about the security of your computer in a
hotspot, limit your network activities to email that is not confidential and basic Internet surfing.
Wireless radio signals travel outside the network, so other WLAN devices can pick up unprotected
signals. Take the following precautions to protect your WLAN:
●Use a firewall.
A firewall checks both data and requests for data that are sent to your network, and discards any
suspicious items. Firewalls are available in both software and hardware. Some networks use a
combination of both types.
●Use wireless encryption.
Wireless encryption uses security settings to encrypt and decrypt data that is transmitted over
the network. For more information, see Help and Support.
Connecting to a wireless network 21 
						

							Connecting to a WLAN
To connect to the WLAN, follow these steps:
1.Be sure that the WLAN device is on. If the device is on, the wireless light is on. If the wireless
light is off, press the wireless button.
NOTE:On some models, the wireless light is amber when all wireless devices are off.
2.Click the network status icon in the notification area, at the far right of the taskbar.
3.Select your WLAN from the list.
4.Click Connect.
If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the
code, and then click OK to complete the connection.
NOTE:If no WLANs are listed, you may be out of range of a wireless router or access point.
NOTE:If you do not see the WLAN you want to connect to, click Open Network and Sharing
Center, and then click Set up a new connection or network. A list of options is displayed,
allowing you to manually search for and connect to a network or to create a new network
connection.
After the connection is made, place the mouse pointer over the network status icon in the notification
area, at the far right of the taskbar, to verify the name and status of the connection.
NOTE:The functional range (how far your wireless signals travel) depends on WLAN
implementation, router manufacturer, and interference from other electronic devices or structural
barriers such as walls and floors.
Using Bluetooth wireless devices (select models only)
A Bluetooth device provides short-range wireless communications that replace the physical cable
connections that traditionally link electronic devices such as the following:
●Computers (desktop, notebook, PDA)
●Phones (cellular, cordless, smart phone)
●Imaging devices (printer, camera)
●Audio devices (headset, speakers)
●Mouse
Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network
(PAN) of Bluetooth devices. For information about configuring and using Bluetooth devices, see the
Bluetooth software Help.
22 Chapter 3   Connecting to a network 
						

							Connecting to a local area network (LAN)
Use a LAN connection if you want to connect the computer directly to a router in your home (instead
of working wirelessly), or if you want to connect to an existing network at your office.
Connecting to a LAN requires an 8-pin, RJ-45 network cable.
To connect the network cable, follow these steps:
1.Plug the network cable into the network jack (1) on the computer.
2.Plug the other end of the network cable into a network wall jack (2) or router.
NOTE:If the network cable contains noise suppression circuitry (3), which prevents
interference from TV and radio reception, orient the circuitry end of the cable toward the
computer.
Connecting to a local area network (LAN) 23 
						

							4 Enjoying entertainment features
Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your
music, and download and watch movies. Or, to make your computer an even more powerful
entertainment center, connect external devices, like speakers, headphones, monitor, projector, TV,
and, on select models, high-definition devices.
Here are some of the entertainment features on your computer.
Multimedia Features
Component Description
(1)  Internal microphones (2) Record sound.
(2)  HP TrueVision HD Webcam  Records video, captures still photographs, allows
you to video conference and chat online using
streaming video.
To use the webcam, select Start > All Programs >
Communication and Chat > CyberLink YouCam.
24 Chapter 4   Enjoying entertainment features 
						

							Component Description
(3)  Webcam light  On: The webcam is in use.
(4)  Speakers (4) Produce sound.
(5)
USB 2.0 ports (2) Connect optional USB devices. For details about
different types of USB ports, see Using a USB
device on page 49.
(6)
USB 3.0 ports (2) Connect optional USB 3.0 devices and provide
enhanced USB power performance.
(7)  Optical drive Reads and writes (select models only) to an optical
disc.
(8)  Integrated subwoofer  Provides superior bass sound.
(9) b key Enables or disables Beats Audio when pressed in
combination with the fn key.
Beats Audio is an enhanced audio profile that
provides a deep, controlled bass while maintaining a
clear sound. Beats Audio is enabled by default.
You can also view and control the bass settings
through the Windows operating system. To view and
control the bass properties:
Select Start > Control Panel > Hardware and
Sound > Beats Audio Control Panel.
(10) fn key Enables or disables Beats Audio when pressed in
combination with the b key.
(11)
Audio-out (headphone) jack Produces sound when connected to optional
powered stereo speakers, headphones, earbuds, a
headset, or television audio.
WARNING!To reduce the risk of personal injury,
adjust the volume before using headphones,
earbuds, or a headset. For additional safety
information, see the Regulatory, Safety and
Environmental Notices.
(12)
Audio-in (microphone) jack Connects an optional computer headset
microphone, stereo array microphone, or monaural
microphone.
(13)
HDMI port  Connects an optional video or audio device, such as
a high-definition television, any compatible digital or
audio component, or a high-speed HDMI device.
(14)
External monitor port Connects an external VGA monitor or projector.
Using the webcam 
Your computer has an integrated webcam, a powerful social networking tool that allows you to
communicate up close with friends and colleagues next door or on the other side of the world. With
the webcam, you can stream video with your instant messaging software, capture and share video,
and take still photos.
Using the webcam 25 
						

							To start the webcam, select Start > All Programs > Communication and Chat > CyberLink
YouCam.
For details about using the webcam, select Start > Help and Support.
Using audio
On your HP computer, you can play music CDs, download and listen to music, stream audio content
from the web (including radio), record audio, or mix audio and video to create multimedia. To
enhance your listening enjoyment, attach external audio devices such as speakers or headphones.
Connecting speakers
You can attach wired speakers to your computer by connecting them to USB ports (or the audio-out
jack) on your computer or on a docking station.
To connect speakers to your computer, follow the device manufacturers instructions. To connect
high-definition speakers to the computer, see 
Configuring audio settings (with HDMI TV)
on page 31. Before connecting audio devices, be sure to adjust the volume.
26 Chapter 4   Enjoying entertainment features 
						

							Connecting headphones
You can connect wired headphones to the headphone jack on the computer.
To connect wireless headphones or speakers to your computer, follow the device manufacturers
instructions.
WARNING!To reduce the risk of personal injury, adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information, see the Regulatory, Safety and
Environmental Notices.
Connecting a microphone
To record audio, connect a microphone to the microphone jack on the computer. For best results
when recording, speak directly into the microphone and record sound in a setting free of background
noise.
Using Beats Audio 
Beats Audio is an enhanced audio feature that provides a deep, controlled bass while maintaining a
clear sound.
Accessing Beats Audio Control Panel
Beats Audio Control Panel allows you to view and manually control audio and bass settings.
To open Beats Audio Control Panel, select Start > Control Panel > Hardware and Sound > Beats
Audio Control Panel.
Enabling and Disabling Beats Audio
▲To enable or disable Beats Audio, press the fn key in combination with the b key.
The following table explains the meaning of the Beats Audio icons that appear on the screen when
you press the Beats Audio hot key (fn+b).
Icon Definition
Beats Audio is enabled.
Beats Audio is disabled.
Using audio 27 
						

							Checking the sound
To check the audio functions on your computer, follow these steps:
1.Select Start > Control Panel > Hardware and Sound > Sound.
2.When the Sound window opens, click the Sounds tab. Under Program Events, select any
sound event, such as a beep or alarm, and click the Test button.
You should hear sound through the speakers or through connected headphones.
To check the recording functions on your computer, follow these steps:
1.Select Start > All Programs > Accessories > Sound Recorder.
2.Click Start Recording and speak into the microphone. Save the file to your desktop.
3.Open a multimedia program and play the recording.
To confirm or change the audio settings on your computer, select Start > Control Panel > Hardware
and Sound > Sound.
Using video
Your HP computer is a powerful video device that enables you to watch streaming video from your
favorite websites and download video and movies to watch on your computer, without needing to
access a network.
To enhance your viewing enjoyment, use one of the video ports on the computer to connect an
external monitor, projector, or TV. Most computers have a video graphics array (VGA) port, which
connects analog video devices. Some computers also have an high-definition multimedia interface
(HDMI) port, which allows you to connect a high-definition monitor or TV.
IMPORTANT:Be sure that the external device is connected to the correct port on the computer,
using the correct cable. Check the device manufacturers instructions if you have questions.
28 Chapter 4   Enjoying entertainment features 
						

							Connecting a VGA monitor or projector
To see the computer screen image on an external VGA monitor or projected for a presentation,
connect a monitor or projector to the computers VGA port.
To connect a monitor or projector:
1.Connect the VGA cable from the monitor or projector to the VGA port on the computer as
shown.
2.Press f4 to alternate the screen image between 3 display states:
●View the screen image on the computer.
●View the screen image on the external device (monitor or projector).
●View the screen image simultaneously on both the computer and external device.
Each time you press f4, the display state changes.
Using video 29 
						

							Connecting an HDMI TV or monitor 
To see the computer screen image on a high-definition TV or monitor, connect the high-definition
device according to the following instructions.
To connect an HDMI device to your computer, you need an HDMI cable, sold separately.
To connect a high-definition TV or monitor to your computer:
1.Connect one end of the HDMI cable to the HDMI port on the computer.
2.Connect the other end of the cable to the high-definition TV or monitor.
3.Press f4 to alternate the computer screen image between 3 display states:
●View the screen image on the computer.
●View the screen image on the external device (TV or monitor).
●View the screen image simultaneously on both the computer and external device.
Each time you press f4, the display state changes.
30 Chapter 4   Enjoying entertainment features