HP Pavilion Dv6600 Entertainment Notebook Pc Series Service Guide
Here you can view all the pages of manual HP Pavilion Dv6600 Entertainment Notebook Pc Series Service Guide. The HP manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 61
Computer feet DescriptionSpare part number Rubber Kit (includes base enclosure rubber feet and display bezel screw covers) 431430-001 The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations illustrated below. Memory module DescriptionSpare part number 2048-MB (PC2-5300, 667-MHz, DDR2)453774-001 and 457437–001 1024-MB (PC2-5300, 667-MHz, DDR2)446495-001 512-MB (PC2-5300, 667-MHz, DDR2) 446494-001 Before removing the memory module, follow these steps:...
Page 62
3.Lift the left side of the cover (2), swing it to the right, and remove the cover. The memory/WLAN module compartment cover is included in the Plastics Kit, spare part number 438368-001. 4.Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) 5.Remove the module (2) by pulling it away from the slot at an angle. NOTE:Memory modules are designed with a notch (3) to prevent incorrect...
Page 63
RTC battery NOTE:Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords and CMOS settings to be cleared. DescriptionSpare part number RTC battery (includes 2-sided tape) 446518-001 and 449729-001 Before removing the RTC battery, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the...
Page 64
WLAN module DescriptionSpare part number Intel 802.11a/b/g/n WLAN modules: ●For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United States, Venezuela, and Vietnam 441086-001 ●For use in Austria, Azerbaijan, Bahrain, Belgium,...
Page 65
DescriptionSpare part number Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, the Peoples Republic of China, Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome & Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea,...
Page 66
3.Remove the WLAN module (4) by pulling it away from the slot at an angle. NOTE:WLAN modules are designed with a notch (5) to prevent incorrect installation into the WLAN module slot. Reverse this procedure to install a WLAN module. 58 Chapter 4 Removal and replacement procedures
Page 67
Optical drive NOTE:All optical drive spare part kits include an optical drive bezel. DescriptionSpare part number For use in computer models with Intel processors: Blu-ray Disc ROM Drive with SuperMulti DVD±R/RW Double-Layer (DL) support462453-001 HD-ROM Drive446502-001 DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe446501-001 DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive446500-001 DVD/CD-RW Combo Drive446499-001 For use in computer models with AMD processors: CD-RW and...
Page 68
4.Use the disc tray frame to slide the optical drive (3) out of the computer. 5.If it is necessary to replace the optical drive bracket, position the optical drive with the optical drive bracket toward you. 6.Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical drive. 7.Remove the optical drive bracket (2). Reverse the above procedure to reassemble and install the optical drive. 60 Chapter 4 Removal and replacement procedures
Page 69
Switch cover DescriptionSpare part number Switch cover (includes LED board and cable) 446512-001 Before removing the switch cover, follow these steps: 1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2.Disconnect all external devices connected to the computer. 3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter...
Page 70
4.Lift the rear edge of the switch cover and swing it forward until it rests on the keyboard. 5.Release the zero insertion force (ZIF) connector (1) to which the power button board is connected, and disconnect the cable from the power button board. 6.Disconnect the microphone cable (2) from the power button board. 7.Release the ZIF connector (3) to which the LED board is connected and disconnect the cable from the power button board. 8.Remove the switch cover. Reverse this procedure to install the switch...