HP Pavilion Dv6 3000 Select Edition Entertainment Notebook Pc Series Manual

							6.Replace the hard drive cover screws (3).
7.Replace the battery.
8.Turn over the computer.
9.Connect external devices to the computer.
10.Connect the computer to AC power.
11.Turn on the computer.
Replacing a drive in the hard drive bay 71 
						

							8 External devices
Using a USB device
A USB port connects an optional external device, such as a USB keyboard, mouse, drive, printer,
scanner, or hub, to the computer or to an optional expansion product.
Some USB devices might require additional support software, which is usually included with the device.
For more information about device-specific software, refer to the manufacturers instructions.
The computer has 3 USB ports, which support USB 1.0, USB 1.1, and USB 2.0 devices. To add more
USB ports, connect an optional hub or optional expansion product.
Connecting a USB device
CAUTION:To prevent damage to a USB connector, use minimal force to connect a USB device.
To connect a USB device to the computer, connect the USB cable for the device to the USB port.
A sound alerts you when the USB device is detected.
NOTE:The first time a USB device is connected, the “Installing device driver software” message is
displayed in the notification area at the far right of the taskbar.
72 Chapter 8   External devices 
						

							Removing a USB device
CAUTION:To prevent loss of information or an unresponsive system, adhere to the instructions in
this section.
CAUTION:To prevent damage to a USB connector, do not pull on the cable to remove the USB device.
To remove a USB device:
1.Click the Safely Remove Hardware and Eject Media icon in the notification area at the far right
of the taskbar.
To display the Safely Remove Hardware and Eject Media icon, click the Show hidden icons icon,
which is the arrow at the left of the notification area.
2.Click the name of the device in the list.
You are prompted that it is safe to remove the device.
3.Remove the device.
Using an eSATA device
An eSATA port connects an optional high-performance eSATA component, such as an eSATA external
hard drive.
Some eSATA devices might require additional support software, which is usually included with the
device. For more information about device-specific software, refer to the software manufacturers
instructions. These instructions are provided with the software, on disk, in the software Help, or on the
manufacturers Web site.
NOTE:The eSATA port also supports an optional USB device.
Using an eSATA device 73 
						

							Connecting an eSATA device
CAUTION:To prevent damage to an eSATA port connector, use minimal force to connect an eSATA
device.
To connect an eSATA device to the computer, connect the eSATA cable for the device to the eSATA
port.
A sounds alerts you that the device is connected to the computer.
74 Chapter 8   External devices 
						

							Removing an eSATA device
CAUTION:To prevent loss of information or an unresponsive system, adhere to the instructions in
this section.
CAUTION:To prevent damage to an eSATA connector, do not pull on the cable to remove the eSATA
device.
To remove an eSATA device:
1.Click the Safely Remove Hardware and Eject Media icon in the notification area at the far right
of the taskbar.
To display the Safely Remove Hardware and Eject Media icon, click the Show hidden icons icon,
which is the arrow at the left of the notification area.
2.Click the name of the device in the list.
You are prompted that it is safe to remove the device.
3.Remove the device.
Using an eSATA device 75 
						

							9 External media cards
Using Digital Media Slot cards
Optional digital cards provide secure data storage and convenient data sharing. These cards are used
with digital media-equipped cameras and PDAs, as well as with other computers.
The Digital Media Slot supports the following digital card formats:
●Memory Stick (MS)
●Memory Stick Pro (MSP)
●MultiMediaCard (MMC)
●Secure Digital (SD) Memory Card
●Secure Digital High Capacity (SDHC) Memory Card
●xD-Picture Card (XD)
●xD-Picture Card (XD) Type H
●xD-Picture Card (XD) Type M
Inserting a digital card
CAUTION:To avoid damaging the digital card or the computer, do not insert any adapter into the
Digital Media Slot.
CAUTION:To prevent damage to the digital card connectors, use minimal force to insert a digital card.
1.Hold the digital card label-side up, with the connectors facing the computer.
76 Chapter 9   External media cards 
						

							2.Insert the card into the Digital Media Slot, and then push in on the card until it is firmly seated.
A sounds alerts you when a device is detected, and a menu of options appears.
Removing a digital card
CAUTION:To prevent loss of data or an unresponsive system, adhere to the instructions in this
section.
NOTE:To stop a data transfer, click Cancel in the operating system Copying window.
To remove a digital card:
1.Save all information and close all programs associated with the digital card.
2.Click the Safely Remove Hardware and Eject Media icon in the notification area at the far right
of the taskbar.
To display the Safely Remove Hardware and Eject Media icon, click the Show hidden icons icon,
which is the arrow at the left side of the notification area.
3.Click the name of the digital card in the list.
You are prompted that it is safe to remove the hardware device.
4.Press in on the digital card (1), and then remove the card from the slot (2).
Using Digital Media Slot cards 77 
						

							10 Memory modules
The computer has one memory module compartment, which is located on the bottom of the computer.
The memory capacity of the computer is upgraded by adding a memory module to the vacant expansion
memory module slot or by upgrading the existing memory module in the primary memory module slot.
WARNING!To reduce the risk of electric shock and damage to the equipment, disconnect the power
cord and remove all batteries before installing a memory module.
CAUTION:Electrostatic discharge (ESD) damages electronic components. Before beginning any
procedure, be sure that you are discharged of static electricity by touching a grounded metal object.
NOTE:To use a dual-channel configuration when adding a second memory module, be sure that both
memory modules are the same size.
To add or replace a memory module:
1.Save your work.
2.Shut down the computer, and close the display.
If you are not sure whether the computer is off or in Hibernation, turn on the computer by pressing
the Power button, and then shut down the computer through the operating system.
3.Disconnect all external devices connected to the computer.
4.Disconnect the power cord from the AC outlet.
5.Turn the computer upside down on a flat surface.
6.Remove the battery from the computer.
7.Remove the four memory module compartment screws (1).
78 Chapter 10   Memory modules 
						

							8.Lift the memory module compartment cover (2) away from the computer.
9.If replacing a memory module, remove the existing memory module by:
a.Pulling away the retention clips (1) on each side of the memory module.
The memory module tilts up.
CAUTION:To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module.
b.Grasping the edge of the memory module (2), and gently pulling the module out of the memory
module slot.
To protect a memory module after removal, place it in an electrostatic-safe container.
10.Insert a new memory module by:
79 
						

							CAUTION:To prevent damage to the memory module, hold the memory module by the edges
only. Do not touch the components on the memory module, and do not bend the memory module.
a.Aligning the notched edge (1) of the memory module with the tab in the memory module slot.
b.With the memory module at a 45-degree angle from the surface of the memory module
compartment, pressing the module (2) into the memory module slot until it is seated.
c.Gently pressing the memory module (3) down, applying pressure to both the left and right
edges of the memory module, until the retention clips snap into place.
11.Align the tabs (1) on the memory module compartment cover with the notches on the computer.
12.Close the cover (2).
13.Insert and tighten the four memory module compartment screws (3).
14.Replace the battery.
15.Turn over the computer.
80 Chapter 10   Memory modules