HP Pavilion Dv5 2000 Entertainment Notebook Pc Series Manual

							Network icon is not displayed
If the network status icon is not displayed in the notification area after you configure the WLAN, the
software driver is either missing or corrupted. A Windows “Device not Found” error message may also
be displayed. The driver must be reinstalled.
Get the latest version of the WLAN device software and drivers for your computer from the HP Web site
at 
http://www.hp.com. If the WLAN device you are using was purchased separately, consult the
manufacturers Web site for the latest software.
To get the latest version of the WLAN device software for your computer, follow these steps:
1.Open your Web browser and go to 
http://www.hp.com/support.
2.Select your country or region.
3.Click the option for software and driver downloads, and then type your computer model number in
the Search box.
4.Press enter, and then follow the on-screen instructions.
NOTE:If the WLAN device you are using was purchased separately, consult the manufacturers Web
site for the latest software.
Current WLAN network security codes are unavailable
If you are prompted for a network key or a name (SSID) when connecting to a WLAN, the network is
protected by security. You must have the current codes to make a connection on a secure network. The
SSID and network key are alphanumeric codes that identify your computer to the network.
●For a network connected to your personal wireless router, review the router user guide for
instructions on setting up the same codes on both the router and the WLAN device.
●For a private network, such as a network in an office or at a public Internet chat room, contact the
network administrator to obtain the codes, and then enter the codes when prompted to do so.
Some networks change the SSID or network keys used in their routers or access points on a regular
basis to improve security. You must change the corresponding code in your computer accordingly.
If you are provided with new wireless network keys and SSID for a network, and if you have previously
connected to that network, these steps to connect to the network:
1.Select Start > Control Panel > Network and Internet > Network and Sharing Center.
2.Click Manage wireless networks in the left panel.
A list showing the available WLANs is displayed. If you are in a hotspot where several WLANs are
active, several are displayed.
3.Select the network in the list, right-click the network, and then click Properties.
NOTE:If the network you want is not listed, check with the network administrator to be sure that
the router or access point is operating.
4.Click the Security tab and enter the correct wireless encryption data into the Network security
key box.
5.Click OK to save these settings.
ENWW Troubleshooting wireless connection problems 21 
						

							WLAN connection is very weak
If the connection is very weak, or if your computer cannot make a connection to a WLAN, minimize
interference from other devices, as follows:
●Move your computer closer to the wireless router or access point.
●Temporarily disconnect devices such as a microwave, cordless phone, or cellular phone to be sure
that other wireless devices are not interfering.
If the connection does not improve, try forcing the device to reestablish all connection values:
1.Select Start > Control Panel > Network and Internet > Network and Sharing Center.
2.Click Manage wireless networks in the left panel.
A list showing the available WLANs is displayed. If you are in a hotspot where several WLANs are
active, several are displayed.
3.Click a network, and then click Remove.
Cannot connect to the wireless router
If you are trying to connect to the wireless router and are unsuccessful, reset the wireless router by
removing power from the router for 10 to 15 seconds.
If the computer still cannot make a connection to a WLAN, restart the wireless router. For details, refer
to the router manufacturers instructions.
Connecting to a local area network (LAN)
Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased
separately). If the network cable contains noise suppression circuitry (1), which prevents interference
from TV and radio reception, orient the circuitry end of the cable (2) toward the device.
To connect the network cable:
WARNING!To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem
cable or telephone cable into an RJ-45 (network) jack.
1.Plug the network cable into the network jack (1) on the computer.
22 Chapter 2   Wireless and local area network ENWW 
						

							2.Plug the other end of the cable into a network wall jack (2).
ENWW Connecting to a local area network (LAN) 23 
						

							3 Pointing devices and keyboard
Using pointing devices
NOTE:In addition to the TouchPad, you can also connect an external USB mouse to one of the USB
ports on the computer.
Setting pointing device preferences
Use Mouse Properties in Windows® to customize settings for pointing devices, such as button
configuration, click speed, and pointer options.
To access Mouse Properties, select Start > Devices and Printers. Then, right-click the device
representing your computer, and select Mouse settings.
Using the TouchPad
To move the pointer, touch and slide one finger across the TouchPad surface in the direction you want
the pointer to go. Use the left and right TouchPad buttons like the corresponding buttons on an external
mouse.
NOTE:For information on identifying the TouchPad components, refer to the TouchPad section earlier
in this guide.
Turning the TouchPad on and off
To switch the TouchPad on and off, quickly double-tap the TouchPad on/off button.
NOTE:If the TouchPad light is on (amber), the TouchPad is off.
24 Chapter 3   Pointing devices and keyboard ENWW 
						

							Using TouchPad gestures
The TouchPad supports a variety of TouchPad gestures. To activate the TouchPad gestures, place two
fingers on the TouchPad at the same time as described in the following sections.
The TouchPad gestures described in this section are enabled at the factory. To disable or reenable
these gestures:
1.Double-click on the Synaptics icon in the notification area, at the far right of the taskbar, and then
click the Device Settings tab.
2.Select the device, and then click Settings.
3.Select the gesture that you want to disable or reenable.
4.Click Apply, and then click OK.
NOTE:Your computer also supports additional TouchPad features that are disabled at the factory. To
view and enable these features, click the Synaptics icon in the notification area, at the far right of the
taskbar, and then click the Device Settings tab. Select the device, and then click Settings.
Scrolling
Scrolling is useful for moving up or down on a page or image. To scroll, place two fingers slightly apart
on the TouchPad and drag them across the TouchPad in an up, down, left, or right motion.
NOTE:Scrolling speed is controlled by finger speed.
Pinching
Pinching allows you to zoom in or out on items such as PDFs, images, and photos.
To pinch:
●Zoom in by holding two fingers together on the TouchPad, and then pull the fingers apart to increase
an objects size.
●Zoom out by holding two fingers apart on the TouchPad, and then pull the fingers together to
decrease an objects size.
ENWWUsing pointing devices 25 
						

							Using the action keys
Action keys are customized actions that are assigned to specific keys at the top of the keyboard.
To use an action key, press and hold this key to activate the assigned action.
NOTE:Depending on the application you are using, pressing fn and one of the action keys will open
a specific shortcut menu within that application.
NOTE:The action key feature is enabled at the factory. You can disable this feature in Setup Utility
(BIOS) and revert back to pressing the fn key and one of the function keys to activate the assigned
function.
IconActionDescription
Help and SupportOpens Help and Support, which provides information about your Windows operating
system and computer, answers to questions and tutorials, and updates to your
computer.
Help and Support also provides automated troubleshooting and links to support
specialists.
Screen brightness downDecreases the screen brightness level incrementally when you hold down this key.
Screen brightness upIncreases the screen brightness level incrementally when you hold down this key.
Switch screen image Switches the screen image among display devices connected to the system. For
example, if a monitor is connected to the computer, pressing this key alternates the
screen image from computer display to monitor display to simultaneous display on
both the computer and the monitor.
Most external monitors receive video information from the computer using the external
VGA video standard. The f4 action key can also alternate images among other devices
that are receiving video information from the computer.
26 Chapter 3   Pointing devices and keyboard ENWW 
						

							IconActionDescription
Previous track/sectionPlays the previous track of an audio CD or the previous section of a DVD or a BD.
Play/PausePlays, pauses, or resumes an audio CD, a DVD, or a BD.
StopStops audio or video playback of a CD, a DVD, or a BD.
Next track/sectionPlays the next track of an audio CD or the next section of a DVD or a BD.
Decrease volumeDecreases speaker sound incrementally when you hold down this key.
Increase volumeIncreases speaker sound incrementally when you hold down this key.
Mute/Restore volumeMutes or restores speaker sound.
WirelessTurns the wireless feature on or off.
NOTE:This key does not establish a wireless connection. To establish a wireless
connection, a wireless network must be set up.
prt scPrint screen Takes a snapshot or picture of your computer screen and copies it to the clipboard.
Using the hotkeys
Hotkeys are combinations of the fn key (1) and either the esc key (2) or one of the arrow keys (3).
IconFunctionHotkeyDescription
 Display system information.fn+escDisplays information about system hardware components
and the system BIOS version number.
Scroll up.fn+up arrowScrolls the page up.
Scroll down.fn+down arrowScrolls the page down.
ENWWUsing the hotkeys 27 
						

							IconFunctionHotkeyDescription
Go home.fn+left arrowReturns the cursor to the beginning of the line where the
cursor is located or returns to the beginning of the document.
Go to the end.fn+right arrowPlaces the cursor at the end of the line or scrolls to the end
of the document.
To use a hotkey command, follow either of these steps:
●Briefly press the fn key, and then briefly press the second key of the hotkey command.
– or –
●Press and hold down the fn key, briefly press the second key of the hotkey command, and then
release both keys at the same time.
28 Chapter 3   Pointing devices and keyboard ENWW 
						

							4Multimedia
Multimedia features
Your computer includes multimedia features that allow you to listen to music, watch movies, and view
pictures. Your computer may include the following multimedia components:
●Optical drive for playing audio and video discs
●Integrated speakers for listening to music
●Integrated microphone for recording your own audio
●Integrated HP TrueVision webcam that allows you to capture and share video
●Preinstalled multimedia software that allows you to play and manage your music, movies, and
pictures
●Multimedia action keys that provide fast access to multimedia tasks
NOTE:Your computer may not include all of the components listed.
The following sections explain how to identify and use the multimedia components included with your
computer.
Identifying your multimedia components
The following illustration and table describe the multimedia features of the computer.
ENWWMultimedia features 29 
						

							ComponentDescription
(1)Internal microphones (2)Record sound.
(2)HP TrueVision webcam lightTurns on when video software accesses the HP TrueVision
webcam.
(3)HP TrueVision webcamRecords video and captures still photographs.
(4)Decrease volume action keyTo decrease the volume, press the f9 action key.
(5)Increase volume action keyTo increase the volume, press the f10 action key.
(6)Mute/Restore volume action keyTo mute or restore the volume, press the f11 action key.
(7)Speakers (2)Produce sound.
(8)Audio-out (headphone) jackProduces sound when connected to optional powered stereo
speakers, headphones, earbuds, a headset, or television audio.
WARNING!To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset. For
additional safety information, refer to the Regulatory, Safety and
Environmental Notices.
NOTE:When a device is connected to the headphone jack, the
computer speakers are disabled.
(9)Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.
30 Chapter 4   MultimediaENWW