HP Pavilion Dv5 1000 Entertainment Notebook Pc Series Manual

Power button board
DescriptionSpare part number
Power button board (includes cable) 486796-001
Before removing the power button board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC...

Speaker assembly
DescriptionSpare part number
Speaker assembly486801-001
Before removing the speaker assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer....

Bluetooth module
NOTE:The Bluetooth module spare part kits do not include a Bluetooth module cable. The Bluetooth
module cable is available using spare part number 489822-001.
DescriptionSpare part number
For use only with computer models equipped with AMD processors412766-002
For use only with computer models equipped with Intel processors 483113-001
Before removing the Bluetooth module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn...

Display assembly
NOTE:All display assemblies include a webcam, 2 microphones, and 2 wireless antenna transceivers
and cables.
DescriptionSpare part number
15.4-inch WSXGA+ AntiGlare display assembly484372-001
15.4-inch WSXGA+ BrightView display assembly484368-001
15.4-inch WXGA AntiGlare display assembly484371-001
15.4-inch WXGA Brightview display assembly 484367-001
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in...

2.Remove the WLAN antenna cables from the clips (3) built into the top cover.
CAUTION:Support the display assembly when removing the following screws. Failure to support
the display assembly can result in damage to the display assembly and other computer
components.
3.Remove the four Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer.
4.Remove the display assembly (2).
NOTE:Steps 5 through 22 provide display assembly internal component removal information for
computer models...

5.If it is necessary to replace the display enclosure or any of the display assembly internal
components, remove the following screw covers and screws:
(1) Two rubber screw covers on the display bezel bottom edge. The display rubber screw covers
are included in the Display Rubber Kit, spare part number 486537-001.
(2) Two Phillips PM2.5×7.0 screws.
6.Turn the display assembly upside down, with the bottom toward you.
7.Release the display enclosure (1) by sliding the enclosure toward the top of the...

12.Release the webcam/microphone module (2) as far as the webcam/microphone module cable
allows.
13.Disconnect the webcam/microphone module cable (3) from the webcam/microphone module.
14.Remove the webcam/microphone module. The webcam/microphone module is available using
spare part number 485345-001.
15.If it is necessary to replace the display inverter, remove the four Phillips PM2.5×4.0 screws (1) that
secure the display inverter cover to the display bezel.
16.Remove the display inverter cover (2) by...

18.Disconnect the display panel cable (2) and backlight cable (3) from the display inverter.
19.Remove the display inverter. The display inverter is available using spare part number
488317-001.
20.If it is necessary to replace the display hinges, remove the four Phillips PM2.5×4.0 screws (1) that
secure the display hinges to the display panel.
21.Remove the display hinge (2) by lifting it straight up. The display hinge is available using spare part
number 485340-001.
NOTE:Steps 23 through 32 provide...

22.If it is necessary to replace the display bezel or any of the display assembly internal components,
remove the following screw covers and screws:
(1) Two rubber screw covers on the display bezel bottom edge. The display rubber screw covers
are included in the Display Rubber Kit, spare part number 480442-001.
(2) Two Phillips PM2.5×7.0 screws.
23.Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge of the
display bezel (3) until the bezel disengages from the...

26.Disconnect the display panel cable (2) and the backlight cable (3) from the display inverter.
27.Remove the display inverter. The display inverter is available using spare part number
488317-001.
28.If it is necessary to replace the display panel, remove the six Phillips PM2.5×4.0 screws (1) that
secure the display panel to the display enclosure.
29.Remove the display panel (2). Display panels are available using spare part numbers 484363-001
(WSXGA+ BrightView display panel) and 484364-001 (WXGA...