HP Pavilion Dv3500 Entertainment Notebook Pc Series Manual

Computer feet
DescriptionSpare part number
Rubber Foot Kit for use in dv3000 models (includes 4 base enclosure rubber feet)468823-001
Rubber Foot Kit for use in dv3500 models (includes 4 base enclosure rubber feet) 502461-001
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the
locations illustrated below.
Battery
DescriptionSpare part number
For use in dv3000 models: 
6-cell, 2.55-Ah, 55-Wh Li-ion468816-001
4-cell, 2.55-Ah, 37-Wh Li-ion468815-001
For use in...

Remove the battery:
1.Turn the computer upside down on a flat surface with the battery bay toward you.
2.Slide and release the left battery release latch (1).
NOTE:The left battery release latch automatically returns to its original position.
3.Slide the right battery release latch (2) to release the battery from the battery bay.
4.Remove the battery (3).
To insert the battery, insert the rear edge of the battery (1) into the battery bay and slide it forward until
the battery is seated. Lock the battery...

WLAN module
DescriptionSpare part number
Intel 4965 802.11a/b/g/n WLAN modules:
●For use in Antigua and Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, Brunei,
Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador,
El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia,
Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United States,
Venezuela, and Vietnam
441086-001
●For use in Austria, Azerbaijan, Bahrain,...

Before removing the WLAN module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.Remove the battery (see 
Battery on page 43).
Remove the WLAN module:
NOTE:To...

5.Remove the WLAN module (4) by pulling it away from the slot at an angle.
NOTE:WLAN modules are designed with a notch (5) to prevent incorrect installation into the
WLAN module slot.
Reverse this procedure to install a WLAN module.
Component replacement procedures 47 

Optical drive
NOTE:All optical drive spare part kits include an optical drive bezel.
DescriptionSpare part number
For use in dv3000 models: 
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive468813-001
DVD/CD-RW Combo Drive468812-001
For use in dv3500 models: 
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive496116-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe 496117-001
Before removing the optical drive, follow these steps:
1.Shut down the computer. If you are unsure...

Memory module
DescriptionSpare part number
For use in dv3000 computer models: 
2048-MB (667-MHz, PC2-5300, DDR2)448151-003
1024-MB (667-MHz, PC2-5300, DDR2)448150-002
512-MB (667-MHz, PC2-5300, DDR2)452312-002
For use in dv3500 computer models: 
4096-MB (667-MHz, PC2-6400, DDR2)496112-001
2048-MB (667-MHz, PC2-6400, DDR2)496111-001
1024-MB (667-MHz, PC2-6400, DDR2) 496110-001
Before removing the memory module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or...

4.Remove the module (2) by pulling it away from the slot at an angle.
NOTE:Memory modules are designed with a notch (3) to prevent incorrect installation into the
memory module slot.
Reverse this procedure to install a memory module.
50 Chapter 4   Removal and replacement procedures 

Hard drive
NOTE:All hard drive spare part kits include a hard drive bracket.
DescriptionSpare part number
For use in dv3000 models: 
320-GB, 5400-rpm468810-001
250-GB, 5400-rpm468809-001
160-GB, 5400-rpm468808-001
120-GB, 5400-rpm468807-001
For use in dv3500 models: 
500-GB, 5400-rpm497761-001
400-GB, 5400-rpm497760-001
320-GB, 5400-rpm496115-001
250-GB, 5400-rpm496114-001
160-GB, 5400-rpm496113-001
Hard Drive Kit (includes hard drive bracket and screws) 468811-001
Before removing the hard drive, follow...

2.Lift the left side of the hard drive bay cover (2), swing it up and to the right, and remove the cover.
The hard drive bay cover is included in the Plastics Kit, spare part number 468821-001 for dv3000
models, 501013-001 for dv3500 models.
3.Loosen the Phillips PM2.5×11.0 captive screw (1) that secures the hard drive to the computer.
4.Use the Mylar tab (2) to slide the hard drive (3) to the right until it disconnects from the system
board.
5.Remove the hard drive (4) from the hard drive bay.
6.Remove...