HP Pavilion Dv3 2200 Entertainment Notebook Pc Series Manual

2.Insert the card into the ExpressCard slot, and then push in on the card until it is firmly seated.
You will hear a sound when the device has been detected, and a menu of options may be displayed.
NOTE:The first time you insert an ExpressCard, the “Installing device driver software” message
is displayed in the notification area, at the far right of the taskbar.
NOTE:An inserted ExpressCard uses power even when idle. To conserve power, stop or remove an
ExpressCard when it is not in use.
Removing an...

92 Chapter 8   External media cards 

9 Memory modules
93 

Adding or replacing memory modules
The computer has one memory module compartment, which is located on the bottom of the computer.
The memory capacity of the computer can be upgraded by adding a memory module to the vacant
expansion memory module slot or by upgrading the existing memory module in the primary memory
module slot.
WARNING!To reduce the risk of electric shock and damage to the equipment, unplug the power cord
and remove all batteries before installing a memory module.
CAUTION:Electrostatic...

8.Lift the memory module compartment cover (2) away from the computer.
9.Remove the memory module from the expansion memory slot:
a.Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
CAUTION:To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module.
b.Grasp the edge of the memory module (2), and gently pull the module out of the memory
module slot.
To protect a memory module after...

10.Insert a memory module in the expansion memory slot:
a.Align the notched edge (1) of the memory module with the tab in the memory module slot.
CAUTION:To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module, and do not bend the
memory module.
b.With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module (2) into the memory module slot until it is seated.
c.Gently press the...

14.Replace the battery.
15.Turn the computer right-side up, and then reconnect external power and external devices.
16.Turn on the computer.
Upgrading a memory module in the primary memory module slot
The expansion memory module slot is stacked above the primary memory module slot. To upgrade a
memory module in the primary memory module slot, follow these steps:
1.Save your work.
2.Shut down the computer.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing...

9.Remove the memory module from the primary memory slot:
a.Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
CAUTION:To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module.
b.Grasp the edge of the memory module (2), and gently pull the module out of the memory
module slot.
To protect a memory module after removal, place it in an electrostatic-safe container.
10.Insert a memory module...

c.Gently press the memory module (3) down, applying pressure to both the left and right edges
of the memory module, until the retention clips snap into place.
11.Align the tabs (1) on the memory module compartment cover with the notches on the computer.
NOTE:If you removed a memory module from the expansion memory slot before removing the
primary memory module, replace the memory module in the expansion memory module slot.
12.Close the cover (2).
13.Tighten the 3 memory module compartment cover screws...

10 Security
100 Chapter 10   Security