HP Pavilion Dv3 2000 Entertainment Notebook Pc Series Manual
Here you can view all the pages of manual HP Pavilion Dv3 2000 Entertainment Notebook Pc Series Manual. The HP manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 131
7–16Maintenance and Service Guide Screw listing Phillips PM2.0×6.0 screw Where used: 3 screws that secure the top cover to the base enclosure Color Quantity Length Thread Head diameter Silver 3 6.0 mm 2.0 mm 4.5 mm
Page 132
Screw listing Maintenance and Service Guide7–17 Phillips PM2.0×7.0 captive screw Where used: 4 captive screws that secure the fan/heat sink assembly to the system board on computer models equipped with graphics subsystems with discrete memory Color Quantity Length Thread Head diameter Silver 4 7.0 mm 2.0 mm 5.0 mm
Page 133
7–18Maintenance and Service Guide Screw listing Where used: 4 captive screws that secure the fan/heat sink assembly to the system board on computer models equipped with graphics subsystems with UMA memory
Page 134
Maintenance and Service Guide8–1 8 Backup and recovery Overview Recovery after a system failure is as complete as your most current backup. HP recommends that you create recovery discs immediately after software setup. As you add new software and data files, you should continue to back up your system on a regular basis to maintain a reasonably current backup. Tools provided by the operating system and HP Recovery Manager software are designed to help you with the following tasks for safeguarding your...
Page 135
8–2Maintenance and Service Guide Backup and recovery Note the following guidelines before creating recovery discs: ■You will need high-quality DVD-R, double-layer DVD-R, DVD+R, double-layer DVD+R, BD-R (writable Blu-ray), or CD-R discs. All these discs are purchased separately. DVDs and BDs have a much higher capacity than CDs. If you use CDs, up to 20 discs may be required, whereas only a few DVDs or BDs are required. ✎Read-write discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE (rewritable...
Page 136
Backup and recovery Maintenance and Service Guide8–3 To copy the screen and paste it into a word-processing document, follow these steps: a. Display the screen. b. Copy the screen: To copy only the active window, press alt+fn+prt sc. To copy the entire screen, press fn+prt sc. c. Open a word-processing document, and then select Edit > Paste. Using system restore points When you back up your system, you are creating a system restore point. A system restore point allows you to save and name a snapshot...
Page 137
8–4Maintenance and Service Guide Backup and recovery Performing a recovery ✎You can recover only files that you have previously backed up. HP recommends that you use HP Recovery Manager to create an entire drive backup as soon as you set up your computer. Recovery Manager software allows you to repair or restore the system if you experience system failure or instability. Recovery Manager works from recovery discs or from a dedicated recovery partition (select models only) on the hard drive. However,...
Page 138
Maintenance and Service Guide9–1 9 Connector pin assignments Audio-in (microphone) Audio-out (headphone) Pin Signal 1 Audio signal in 2 Audio signal in 3Ground Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3Ground
Page 139
9–2Maintenance and Service Guide Connector pin assignments External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5Ground 6 Ground analog 7 Ground analog 8 Ground analog 9+5 VDC 10 Ground 11 Monitor detect 12 DDC 2B data 13 Horizontal sync 14 Vertical sync 15 DDC 2B clock
Page 140
Connector pin assignments Maintenance and Service Guide9–3 HDMI Pin Signal 1 Transition minimized differential signal (TDMS) data 2+ 2 TDMS data 2 shield 3 TDMS data 2- 4 TDMS data 1+ 5 TDMS data 1 shield 6 TDMS data 1 shield 7 TDMS data 0+ 8 TDMS data 0 shield 9 TDMS data 0- 10 TDMS clock + 11 TDMS data clock shield 12 TDMS data clock- 13 Consumer electronics control 14 Not connected 15 Display data channel (DDC) clock 16 DDC data 17 Ground 18 +5V Power 19 Hot plug detect