HP Pavilion Dv3 1124ca Entertainment Notebook Pc Manual
Have a look at the manual HP Pavilion Dv3 1124ca Entertainment Notebook Pc Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Your change goes into effect immediately. Navigating and selecting in the Setup Utility Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection are by keystroke. ●To choose a menu or a menu item, use the arrow keys. ●To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the arrow keys or f5 or f6. ●To select an item, press enter. ●To close a text box or return to the menu display, press esc. ●To display additional navigation and selection information while the Setup Utility is open, press f1. Displaying system information The following procedure explains how to display system information in the Setup Utility. If the Setup Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2. 1.Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press f10. – or – Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed, press f10. 2.Select the Main menu. System information such as the system time and date, and identification information about the computer is displayed. 3.To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit Discarding Changes, and then press enter. Restoring default settings in the Setup Utility The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. 1.Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press f10. – or – Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed, press f10. 2.Use the arrow keys to select Exit > Load Setup Defaults, and then press enter. Navigating and selecting in the Setup Utility 63
3.When the Setup Confirmation is displayed, press enter. 4.To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and then press enter. The Setup Utility default settings go into effect when the computer restarts. NOTE:Your password, security, and language settings are not changed when you restore the factory default settings. Exiting the Setup Utility You can exit the Setup Utility with or without saving changes. ●To exit the Setup Utility and save your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to select Exit > Exit Saving Changes, and then press enter. ●To exit the Setup Utility without saving your changes from the current session: If the Setup Utility menus are not visible, press esc to return to the menu display. Then use the arrow keys to select Exit > Exit Discarding Changes, and then press enter. After either choice, the computer restarts in Windows. Setup Utility menus The menu tables in this section provide an overview of Setup Utility options. NOTE:Some of the Setup Utility menu items listed in this chapter may not be supported by your computer. Main menu SelectTo do this System information ●View and change the system time and date. ●View identification information about the computer. ●View specification information about the processor, memory size, system BIOS, and keyboard controller version (select models only). Security menu SelectTo do this Administrator passwordEnter, change, or delete an administrator password. Power-On Password Enter, change, or delete a power-on password. 64 Chapter 5 Setup Utility
System Configuration menu SelectTo do this Language SupportChange the Setup Utility language. Button Sound (select models only)Enable/disable the capacitive button tapping sound. Virtualization TechnologyEnable/disable the processor Virtualization Technology. Processor C6 State (select models only)Enable/disable the processor C6 sleep state. LAN Power Saving (select models only)Enable/disable LAN Power Saving. When enabled, saves power when the computer is in DC mode. Card Reader/1394 Power Saving (select models only)Enable/disable Card Reader/1394 Power Saving. When enabled, saves power when the computer is in DC mode. Fan Always OnEnabled/disable Fan Always On. When enabled, the computer fan will always be on. Boot Options Set the following boot options: ●f9 and f10 Delay (sec.)―Set the delay for the f9 and f10 functions of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20). ●CD-ROM boot―Enable/disable boot from CD-ROM. ●Floppy boot―Enable/disable boot from diskette. ●Internal Network Adapter boot―Enable/disable boot from Internal Network Adapter. ●Boot Order―Set the boot order for: ◦USB Floppy ◦Internal CD/DVD ROM Drive ◦Hard drive ◦USB Diskette on Key ◦USB Hard drive ◦Network adapter Diagnostics menu SelectTo do this Hard Disk Self TestRun a comprehensive self-test on the hard drive. NOTE:On models with two hard drives, this menu option is called the Primary Hard Disk Self Test. Secondary Hard Disk Self Test (select models only)Run a comprehensive self-test on a secondary hard drive. Memory Test Run a diagnostic test on the system memory. Setup Utility menus 65
6 Specifications Computer specifications MetricU.S. Dimensions Length 23.00 cm9.05 in Width31.20 cm12.28 in Height (front to rear)2.59 to 3.24 cm1.02 to 1.28 in Weight (with optical drive, hard drive, and battery)1.81 kg4.00 lbs Input power Operating voltage 18.5 V dc —19.0 V dc Operating current3.5 A or 4.74 A Temperature Operating 5°C to 35°C41°F to 95°F Nonoperating-20°C to 60°C-4°F to 140°F Relative humidity Operating 10% to 90% Nonoperating5% to 95% Maximum altitude (unpressurized) Operating -15 m to 3,048 m-50 ft to 10,000 ft Nonoperating-15 m to 12,192 m-50 ft to 40,000 ft NOTE:Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this range of temperatures. 66 Chapter 6 Specifications
13.3-inch, WXGA, BrightView display specifications MetricU.S. Dimensions Height 18.0 cm7.1 in Width28.7 cm11.3 in Diagonal33.9 cm13.4 in Number of colorsUp to 16.8 million Contrast ratio250:1 (typical) Brightness180 nits (typical) Pixel resolution Pitch 0.279 × 0.279 mm Format1280 × 800 ConfigurationRGB vertical stripe BacklightEdge lit Character display80 × 25 Total power consumption4.0 W Viewing angle+/-40° horizontal, +120/-40° vertical (typical) 13.3-inch, WXGA, BrightView display specifications 67
Hard drive specifications 500-GB*400-GB*320-GB*250-GB*160-GB* Dimensions Height 9.5 mm9.5 mm9.5 mm9.5 mm9.5 mm Width70 mm70 mm70 mm70 mm70 mm Weight102 g102 g102 g102 g102 g Interface typeSATASATASATASATASATA Transfer rate Synchronous (maximum) 100 MB/sec100 MB/sec100 MB/sec100 MB/sec100 MB/sec SecurityATA securityATA securityATA securityATA securityATA security Seek times (typical read, including setting) Single track 3 ms3 ms3 ms3 ms3 ms Average13 ms13 ms13 ms13 ms13 ms Maximum24 ms24 ms24 ms24 ms24 ms Logical blocks1,048,576,000838,860,800645,126,482500,586,425312,581,808 Disk rotational speed 5400 rpm Operating temperature 5°C to 55°C (41°F to 131°F) NOTE:Certain restrictions and exclusions apply. Consult technical support for details. *1 GB = 1 billion bytes when referring to hard drive storage capacity. Accessible capacity is less. Actual drive specifications may differ slightly. 68 Chapter 6 Specifications
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive specifications Applicable discRead: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD (Photo-CD, CD- EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAMWrite: CD-R and CD-RW DVD+R, DVD+RW, DVD-R, DVD-RW, DVD-RAM Access timeCDDVD Random< 175 ms< 230 ms Cache buffer2 MB Data transfer rate 24X CD-ROM 3,600 KB/sec 8X DVD10,800 KB/sec 24X CD-R3,600 KB/sec 16X CD-RW2,400 KB/sec 8X DVD+R10,800 KB/sec 4X DVD+RW5,400 KB/sec 8X DVD-R10,800 KB/sec 4X DVD-RW5,400 KB/sec 2.4X DVD+R(9)2,700 KB/sec 5X DVD-RAM6,750 KB/sec Transfer modeMultiword DMA Mode DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive specifications 69
System DMA specifications Hardware DMASystem function DMA0Not applicable DMA1*Not applicable DMA2*Not applicable DMA3Not applicable DMA4Direct memory access controller DMA5*Available for PC Card DMA6Not assigned DMA7Not assigned *PC Card controller can use DMA 1, 2, or 5. System memory map specifications SizeMemory addressSystem function 640 KB00000000-0009FFFFBase memory 128 KB000A0000-000BFFFFVideo memory 48 KB000C0000-000CBFFFVideo BIOS 160 KB000C8000-000E7FFFUnused 64 KB000E8000-000FFFFFSystem BIOS 15 MB00100000-00FFFFFFExtended memory 58 MB04800000-07FFFFFFSuper extended memory 58 MB04800000-07FFFFFFUnused 2 MB08000000-080FFFFFVideo memory (direct access) 4 GB08200000-FFFEFFFFUnused 64 KB FFFF0000-FFFFFFFF System BIOS 70 Chapter 6 Specifications
System interrupt specifications Hardware IRQSystem function IRQ0System timer IRQ1Standard 101-/102-Key or Microsoft® Natural Keyboard IRQ2Cascaded IRQ3Intel 82801DB/DBM USB2 Enhanced Host Controller—24CD IRQ4COM1 IRQ5*Conexant AC—Link Audio Intel 82801DB/DBM SMBus Controller—24C3 Data Fax Modem with SmartCP IRQ6Diskette drive IRQ7*Parallel port IRQ8System CMOS/real-time clock IRQ9*Microsoft ACPI-compliant system IRQ10*Intel USB UHCI controller—24C2 Intel 82852/82855 GM/GME Graphic Controller Realtek RTL8139 Family PCI Fast Ethernet Controller IRQ11Intel USB EHCI controller—24CD Intel USB UHCI controller—24C4 Intel USB UHCI controller—24C7 Intel Pro/Wireless 2200BG TI OHCI 1394 host controller TI PCI1410 CardBus controller IRQ12Synaptics PS/2 TouchPad IRQ13Numeric data processor IRQ14Primary IDE channel IRQ15Secondary IDE channel *Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none. NOTE:PC Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial port may assert IRQ3 or IRQ4. System interrupt specifications 71
System I/O address specifications I/O address (hex)System function (shipping configuration) 000 - 00FDMA controller no. 1 010 - 01FUnused 020 - 021Interrupt controller no. 1 022 - 024Opti chipset configuration registers 025 - 03FUnused 02E - 02F87334 “Super I/O” configuration for CPU 040 - 05FCounter/timer registers 044 - 05FUnused 060Keyboard controller 061Port B 062 - 063Unused 064Keyboard controller 065 - 06FUnused 070 - 071NMI enable/RTC 072 - 07FUnused 080 - 08FDMA page registers 090 - 091Unused 092Port A 093 - 09FUnused 0A0 - 0A1Interrupt controller no. 2 I/O Address (hex)System function (shipping configuration) 0A2 - 0BFUnused 0C0 - 0DFDMA controller no. 2 0E0 - 0EFUnused 0F0 - 0F1Coprocessor busy clear/reset 0F2 - 0FFUnused 100 - 16FUnused 170 - 177Secondary fixed disk controller 178 - 1EFUnused 1F0 - 1F7Primary fixed disk controller 1F8 - 200Unused 201JoyStick (decoded in ESS1688) 202 - 21F Unused 72 Chapter 6 Specifications