HP Pavilion Dv3 1000 Entertainment Notebook Pc Series Manual
Here you can view all the pages of manual HP Pavilion Dv3 1000 Entertainment Notebook Pc Series Manual. The HP manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 102
10 Power cord set requirements The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased. Power cord sets for use in other countries or regions must meet the requirements of the country or region where the computer is used. Requirements for all countries or regions The...
Page 103
Requirements for specific countries or regions Country/regionAccredited agencyApplicable note number AustraliaEANSW1 AustriaOVE1 BelgiumCEBC1 CanadaCSA2 DenmarkDEMKO1 FinlandFIMKO1 FranceUTE1 GermanyVDE1 ItalyIMQ1 JapanMETI3 The NetherlandsKEMA1 NorwayNEMKO1 The Peoples Republic of ChinaCCC5 South KoreaEK4 SwedenSEMKO1 SwitzerlandSEV1 TaiwanBSMI4 The United KingdomBSI1 The United StatesUL2 1.The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance...
Page 104
11 Recycling Battery When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for computer battery disposal. Display WARNING!The backlight contains mercury. Caution must be exercised when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. CAUTION:The procedures in this appendix can result in damage to display components. The only components...
Page 105
Perform the following steps to disassemble the display assembly: 1.Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2.Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display assembly. 3.Remove the display bezel (3). Display 97
Page 106
4.Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). 5.Remove all screws (1) that secure the display panel assembly to the display enclosure. 6.Remove the display panel assembly (2) from the display enclosure. 7.Turn the display panel assembly upside down. 8.Remove all screws that secure the display panel frame to the display panel. 9.Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display panel frame. 98 Chapter 11...
Page 107
10.Remove the display panel frame (2) from the display panel. 11.Remove the screws (1) that secure the backlight cover to the display panel. 12.Lift the top edge of the backlight cover (2) and swing it outward. 13.Remove the backlight cover. 14.Turn the display panel right-side up. Display 99
Page 108
15.Remove the backlight cables (1) from the clip (2) in the display panel. 16.Turn the display panel upside down. 17.Remove the backlight frame from the display panel. WARNING!The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. 18.Remove the backlight from the backlight frame. 100 Chapter 11 Recycling
Page 109
19.Disconnect the display cable (1) from the LCD panel. 20.Remove the screws (2) that secure the LCD panel to the display rear panel. 21.Release the LCD panel (3) from the display rear panel. 22.Release the tape (4) that secures the LCD panel to the display rear panel. 23.Remove the LCD panel. 24.Recycle the LCD panel and backlight. Display 101
Page 110
Index Symbols/Numerics 1394 Power Saving 65 A AC adapter light, identifying 11 AC adapter, spare part number 21 administrator password 64 antenna illustrated 17 removal 47 spare part number 18 applications key, Windows 7 audio board spare part number 15 audio, product description 2 audio-in (microphone) jack, identifying 10 audio-in jack pin assignments 90 audio-out (headphone) jack, identifying 10 audio-out jack pin assignments 90 B backup 86 base enclosure, spare part number 15 battery removal 32 spare...